Reactor carrying multiphase chemical reactions with solid particles suspended in an ascending fluid
For other topics on fluidization, see Fluidized bed, Fluidized bed combustion, and Fluidization.
A fluidized bed reactor (FBR) is a type of reactor device that can be used to carry out a variety of multiphase chemical reactions. In this type of reactor, a fluid (gas or liquid) is passed through a solid granular material (usually a catalyst) at high enough speeds to suspend the solid and cause it to behave as though it were a fluid. This process, known as fluidization, imparts many important advantages to an FBR. As a result, FBRs are used for many industrial applications.
and 26 Related for: Fluidized bed reactor information
A fluidizedbedreactor (FBR) is a type of reactor device that can be used to carry out a variety of multiphase chemical reactions. In this type of reactor...
fluidization. Fluidizedbeds are used for several purposes, such as fluidizedbedreactors (types of chemical reactors), solids separation, fluid catalytic...
in less than 1 second. The fluidized catalyst particles are shuttled between the fluidizedbedreactor and a fluidizedbed burner where the coke deposits...
Fluidizedbed combustion (FBC) is a combustion technology used to burn solid fuels. In its most basic form, fuel particles are suspended in a hot, bubbling...
rate beyond minimum fluidization. Such a bed is called aggregative, heterogeneous, or bubbling fluidized. (d) Turbulent FluidizedBed: When the gas flow...
cubic meters. A fluidizedbedreactor suspends small particles of catalyst by the upward motion of the fluid to be reacted. The fluid is typically a gas...
generally contain high levels of corrosive ash. Fluidizedbed gasifiers uses inert bed material at a fluidized state which enhance the heat and biomass distribution...
trickle bed reactor (fixed or packed bed), fluidizedbedreactor, and bubble column reactor. A bubble column reactor is a very simple device consisting...
the catalyst bed. A chemical reactor may also be a fluidizedbed; see Fluidizedbedreactor. Chemical reactions occurring in a reactor may be exothermic...
Annular FluidizedBed (AFB) introduces gas at high speeds that enter the reactor from the bottom of the large central nozzle and additional fluidized gas...
process typically employing a dual fluidizedbed system. CLC operated with an interconnected moving bed with a fluidizedbed system, has also been employed...
temperatures. An emerging, alternative process of refinement uses a fluidizedbedreactor. The photovoltaic industry also produces upgraded metallurgical-grade...
filter Expanded granular sludge bed digestion Hybrid reactor (combination of UASB and an anaerobic filter) Fluidizedbedreactor List of waste-water treatment...
FBR may refer to: Fast breeder reactorFluidizedbedreactor Foreign body response Full Bridge Rectifier Beveren railway station's station code FBR Capital...
table hereafter. Fluidizedbedreactor – Reactor carrying multiphase chemical reactions with solid particles suspended in an ascending fluid IUPAC Gold Book...
in a Midrex-type unit. An equivalent to COREX, based on the FINMET fluidizedbed instead of the Midrex vessel, is the Korean FINEX process (a contraction...
biotechnology. By the mid-1990s, the discovery of anammox in the fluidizedbedreactor was published. A maximum ammonium removal rate of 0.4 kg N/m3/d...
is called fluidizedbed membrane reactor. Other types of reactor take the name from the membrane material, e.g., zeolite membrane reactor. Among these...
equation – Relation used in the field of fluid dynamicsPages displaying short descriptions of redirect targets Fluidizedbed – Physical phenomenon Industrial...
passed through a fluidizedbedreactor containing the catalyst at 400–510 °C and 50–200 kPag. The reactants pass through the reactor only once, before...
Generation IV (Gen IV) reactors are nuclear reactor design technologies that are envisioned as successors of generation III reactors. The Generation IV International...
substrate with a layer of pyrolytic carbon. This is typically done in a fluidizedbedreactor heated to 1,000–2,000 °C or 1,830–3,630 °F. Pyrolytic carbon coatings...
that time used reactors with a fixed bed of catalyst and was a semi-batch operation involving multiple reactors with some of the reactors in operation while...