Titanium aluminium nitride (TiAlN) or aluminium titanium nitride (AlTiN; for aluminium contents higher than 50%) is a group of metastable hard coatings consisting of nitrogen and the metallic elements aluminium and titanium. This compound as well as similar compounds(such as TiN and TiCN) are most notably used for coating machine tools such and endmills and drills to change their properties, such as increased thermal stability and/or wear resistance. Four important compositions (metal content 100 wt.%) are deposited in industrial scale by physical vapor deposition methods:
Ti50Al50N (industrially introduced by the company CemeCoat (now CemeCon) Aachen, BRD, group T. Leydecker ca. 1989)[1]
Al55Ti45N (industrially introduced by the company Metaplas Ionon (now Oerlikon), Bergisch Gladbach, BRD, group J. Vetter ca. 1999)
Al60Ti40N (industrially introduced by the company Kobe Steel, Kobe, Japan, ca. 1992)
Al66Ti34N (industrially introduced by the company Metaplas (now Oerlikon) group J. Vetter ca. 1996).[2]
The fundamental reasons why TiAlN coatings outperform pure Titanium nitride (TiN) coatings are considered to be:
Increased oxidation resistance at elevated temperatures due to the formation of a protective aluminium-oxide layer at the surface
Increased hardness in the freshly deposited films due to micro-structure changes and solid solution hardening
Age hardening of the coatings at temperatures typical for cutting tools operation due to spinodal decomposition of TiAlN into TiN and cubic AlN [3]
The age hardening phenomenon has been shown to originate in a mismatch in the quantum mechanical electronic structure of TiN and AlN.[4][5]
The coatings are mostly deposited by cathodic arc deposition or magnetron sputtering.
Even though most TiAlN and AlTiN coatings are industrially synthesized using alloy targets with specific percentages of aluminium and titanium it is possible to produce TiAlN coatings with pure Al and Ti targets using a cathodic arc deposition technique.
TiAlN and AlTiN coatings from pure Al and pure Ti targets by Cathodic arc deposition have been produced industrially by NanoShield PVD Thailand since 1999.
By using separate target technology it is possible to offer more flexibility regarding the structure and composition of the coating.
Selected properties of Al66Ti34N are:
Vickers hardness 2600 to 3300 HV.
Phase stability ca. 850 °C, start of decomposition to AlN+TiN.
Intense oxidation starts at about 800 °C (ca. 300 °C higher than for TiN).
Lower electrical and thermal conductivity than TiN
Typical coating thickness ca. (1 to 7) μm
One commercial coating type used to improve the wear resistance of tungsten carbide tools is the AlTiN-Saturn from Sulzer Metaplas.[6]
The coatings are sometimes doped with at least one of the elements carbon, silicon, boron, oxygen and yttrium in order to improve selected properties for specific applications. These coatings are also used to create multilayer systems. For example, they can be used in combination with TiSiXN like those used in the Mpower coating family of Sulzer Metaplas. The coating types mentioned above are applied to protect tools including special tools for medical applications. They are also used as decorative finishes.
One derivative of TiAlN coating technology is the nanocomposite TiAlSiN (titanium aluminium silicon nitride) which was developed by SHM in the Czech Republic and now marketed by Platit of Switzerland.
The nanocomposite TiAlSiN coating exhibits superhard hardness and outstanding high temperature workability.
^Leyendecker, T; Lemmer, O; Esser, S; Ebberink, J (1991). "The development of the PVD coating TiAlN as a commercial coating for cutting tools". Surface and Coatings Technology. 48 (2): 175–178. doi:10.1016/0257-8972(91)90142-J.
^Vetter, J (1995). "Vacuum arc coatings for tools: potential and application". Surface and Coatings Technology. 76–77: 719–724. doi:10.1016/0257-8972(95)02499-9.
^Mayrhofer, Paul H.; Hörling, Anders; Karlsson, Lennart; Sjölén, Jacob; Larsson, Tommy; Mitterer, Christian; Hultman, Lars (2003). "Self-organized nanostructures in the Ti–Al–N system". Applied Physics Letters. 83 (10): 2049–2051. Bibcode:2003ApPhL..83.2049M. doi:10.1063/1.1608464.
^Alling, B.; Ruban, A.; Karimi, A.; Peil, O.; Simak, S.; Hultman, L.; Abrikosov, I. (2007). "Mixing and decomposition thermodynamics of c-Ti1−xAlxN from first-principles calculations". Physical Review B. 75 (4): 045123. Bibcode:2007PhRvB..75d5123A. doi:10.1103/PhysRevB.75.045123.
^Music, D.; Geyer, R.W.; Schneider, J.M. (2016). "Recent progress and new directions in density functional theory based design of hard coatings". Surface & Coatings Technology. 286: 178–190. doi:10.1016/j.surfcoat.2015.12.021.
^PVD High-Performance Coating
and 28 Related for: Titanium aluminium nitride information
Titaniumnitride (TiN; sometimes known as tinite) is an extremely hard ceramic material, often used as a physical vapor deposition (PVD) coating on titanium...
Aluminiumnitride (AlN) is a solid nitride of aluminium. It has a high thermal conductivity of up to 321 W/(m·K) and is an electrical insulator. Its wurtzite...
Some nitrides have a found applications, such as wear-resistant coatings (e.g., titaniumnitride, TiN), hard ceramic materials (e.g., silicon nitride, Si3N4)...
material in aluminium smelting and can be shaped by electrical discharge machining. TiB2 shares some properties with boron carbide and titanium carbide,...
catalysts; and titanium trichloride (TiCl3), which is used as a catalyst in the production of polypropylene. Titanium can be alloyed with iron, aluminium, vanadium...
can be further enhanced with coatings such as titaniumaluminiumnitride or titanium chromium nitride to increase their thermal stability, and prolong...
are most commonly used on low-alloy steels. They are also used on titanium, aluminium and molybdenum. Typical applications include gears, crankshafts,...
but 45% lighter. It is also twice as strong as weak aluminium alloys but only 60% heavier. Titanium has outstanding corrosion resistance to seawater, and...
Aluminium reacts with most nonmetals upon heating, forming compounds such as aluminiumnitride (AlN), aluminium sulfide (Al2S3), and the aluminium halides...
suitable oxide or nitride, preoxidation of the particles to form a silica coating, or using a layer of sacrificial metal. An aluminium-aluminium carbide composite...
complexes. With ammonia, titaniumnitride is formed. An illustrative reaction is the synthesis of tetrakis(dimethylamido)titanium Ti(N(CH3)2)4, a yellow...
four elements titanium (Ti), zirconium (Zr), hafnium (Hf), and rutherfordium (Rf). The group is also called the titanium group or titanium family after...
of MAX phases, an emerging class of ternary carbides or nitrides with aluminium or titanium alloys have been studied since 2006 as high-value materials...
"Determination of the optical band-gap energy of cubic and hexagonal boron nitride using luminescence excitation spectroscopy" (PDF). Journal of Physics:...
2016. Aluminium gallium arsenide (AlGaAs) is used in high-power infrared laser diodes. The semiconductors gallium nitride and indium gallium nitride are...
carried out on 20 and 25 wt% Ni steels to which small additions of aluminium, titanium, and niobium were made; a rise in the price of cobalt in the late...
suspension includes a 43 mm inverted fork at the front end, with a titanium-aluminum-nitride low-stiction coating on its sliders. A high-end shock supports...
precipitating vanadium and titanium. The following inclusion types can also be found in aluminium alloys: alumina needles (Al2O3), nitrides (AlN), iron oxides...
ratio gearbox fitted. The bike had uprated suspension, 50mm Marzocchi Titaniumnitride coated forks were used at the front and a race quality Sachs shock...
Carbides, Nitrides and Borides. Springer. pp. 270. ISBN 978-0-7923-5707-0. Schmidt J, Boehling M, Burkhardt U, Grin Y (2007). "Preparation of titanium diboride...
low-friction coatings and thin-film deposits like molybdenum disulfide or titaniumnitride, and increasing the surface hardness of the metals using processes...
Global Information