Electropolishing, also known as electrochemical polishing, anodic polishing, or electrolytic polishing (especially in the metallography field), is an electrochemical process that removes material from a metallic workpiece, reducing the surface roughness by levelling micro-peaks and valleys, improving the surface finish. Electropolishing is often compared to, but distinctly different from, electrochemical machining. It is used to polish, passivate, and deburr metal parts. It is often described as the reverse of electroplating. It may be used in lieu of abrasive fine polishing in microstructural preparation.[1]
^Vander Voort, G.F. ed. (2004) "Chemical and Electrolytic Polishing," ASM Handbook, Vol. 9: Metallography and Microstructures, ASM International, pp. 281-293, ISBN 978-0-87170-706-2.
used for electropolishing are most often concentrated acid solutions such as mixtures of sulfuric acid and phosphoric acid. Other electropolishing electrolytes...
corrosion. Electropolishing is even more effective, because it doesn’t leave the scratches that mechanical polishing will. Electropolishing is accomplished...
successfully used in metal processing applications such as electrodeposition, electropolishing, and metal extraction. Type IV eutectics are similar to type III yet...
cathode are the main effects. Chemical milling Electro-Glo Distribution Electropolishing Etching Nontoxic etching (mentions anodic etching) Glass etching Surface...
surfaces to remove rust. Corrosion removal should not be confused with electropolishing, which removes some layers of the underlying metal to make a smooth...
(1791–1867), Wolfram Research "What is Electropolishing?" https://www.electro-glo.com/what-is-electropolishing/ S.P.S BADWAL; S. Giddey; C. Munnings;...
useful eluent in ion-exchange chromatography. It is also used for electropolishing or etching of aluminium, molybdenum, and other metals. Given its strong...
electrolytic deposition of colloidal particles in a liquid medium Electropolishing – the reverse of electroplating Electrotyping – using electroplating...
materials such as bones, minerals and teeth, and an alternative to electropolishing and ion milling. Microtome sections can be made thin enough to section...
choline chloride and ethylene glycol) facilitates metal dissolution in electropolishing of steels. DESs have also demonstrated promising results to recover...
stainless steel and cobalt-chrome alloys.) When properly treated (via electropolishing or passivation), nitinol forms a very stable protective TiO2 layer...
~100 nanometers or less. Other techniques, such as ion milling or electropolishing can be used to prepare such thin samples. However, the nanometer-scale...
objects for FIM experiments. Metal tips for FEM and FIM are prepared by electropolishing (electrochemical polishing) of thin wires. However, these tips usually...
geometry and are produced by similar techniques as TEM sample preparation electropolishing, or focused ion beam methods. Since 2006, commercial systems with laser...
Minimize stainless steel material in the polishing loop and, if used, electropolishing is recommended. Minimize dead legs in the piping to avoid the potential...
the manufacture of, usually thin, metal parts through electroplating Electropolishing, the removal of material from a metallic workpiece Etching, industrially...
distribution systems in the early 1980s. The material is further improved by electropolishing to render wetted surfaces extremely impervious to the most reactive...
choline chloride and ethylene glycol) facilitates metal dissolution in electropolishing of steels. DESs have also demonstrated promising results to recover...
selectivity towards dopamine, through substrate pre-treatments (lapping, electropolishing and chemical etching) instead of post-process treatments. Moreover...
volunteers introduced a special electropolishing process to provide a super-smooth stent surface. The electropolishing process, developed in the aerospace...
Retrieved 16 September 2016. "Oxygen Cleaning Specifications". Harrison Electropolishing. Retrieved 28 July 2020. Safety Advisory Group (2008). "Safety principles...