PDMS stamps are pieces of polydimethylsiloxane (PDMS), a silicone, that have been patterned usually against a master mold to form a relief pattern used in soft lithography. This PDMS stamp can be used in either its current form as a relief surface for techniques such as microcontact printing or can also be attached to an external source by tubing so that liquid may be passed through channels on its surface. In this second case it will often be laminated to a surface so that chemistry can be performed on that surface producing a pattern of the PDMS stamp on to the surface. Alternatively a PDMS stamp can be laminated to a second piece of PDMS to form a contained device. It is possible to pattern PDMS with nanometre resolution.
PDMS stamps can be procured from some commercial sources such as Research Micro Stamps.[1]
Many techniques have been developed to modify the basic setups to perform a range of tasks such as assays on small volumes. These kinds of devices are often referred to as microfluidic devices. Because of the small dimensions of these devices flow is laminar, not turbulent, which can lead to many useful properties; however, this reduces the ability of fluid streams to mix.
possible to pattern PDMS with nanometre resolution. PDMSstamps can be procured from some commercial sources such as Research Micro Stamps. Many techniques...
the relief patterns on a master polydimethylsiloxane (PDMS) stamp or Urethane rubber micro stamp to form patterns of self-assembled monolayers (SAMs) of...
using "elastomeric stamps, molds, and conformable photomasks". It is called "soft" because it uses elastomeric materials, most notably PDMS. Soft lithography...
effect is also apparent in experiments where a polydimethylsiloxane (PDMS) stamp is made with small periodic post structures. The surface with the posts...
when molecular weight is high, which results in PDMS' unusually high level of viscoelasticity. PDMS is viscoelastic, meaning that at long flow times...
polydimethylsiloxane (PDMS) matrix are broken to controlably etch PDMS (i.e. dissolve) at a slow rate along the outside of a PDMS channel formed with a patterned PDMS stamp...
while in nTP, nanolithographically created structures on silicon or PDMS "stamp" are transferred or printed on other surfaces such as glass or polymers...
contact printing: Polydimethylsiloxane (PDMS) is molded using a silicon master. Top side of resulting PDMSstamp is coated with a thin film of Parylene-c...
are first defined using photolithography. A polydimethylsiloxane (PDMS) elastomer stamp is subsequently replica-molded from the resist patterns. Further...
valves and vias are molded within bonded layers of elastomer. Commercial PDMSstamps can mold materials such as optical adhesive in a sequential process to...
graphene only. While Scotch tape is generally used as the adhesive tape, PDMSstamps can also satisfactorily cleave MoS2 if it is important to avoid contaminating...
the protein was done by flowing protein solutions through the PDMS micro channels. Then PDMS was removed from the surface and solutions of antibody were...
chemical compounds such as polydimethylsiloxane. Elastomers are used to make a stamp, mold, or mask (akin to photomask) which in turn is used to generate micro...
detail the history of the Lucayans, the Space Race, Turks and Caicos postage stamps, slavery and the history of the slave trade, the sisal and salt industries...
polling station of an electoral district get two paper ballots to put a stamp on their preferred candidate for the national and provincial assembly respectively...
microcontact printing. A scheme for the creation of a polydimethylsiloxane (PDMS) master stamp. Step 2 for microcontact printing A scheme of the inking and contact...
is armed with a single 76-millimetre (3 in) OTO Melara gun, two ASELSAN STAMP 12.7-millimetre (0.50 in) guns, eight Harpoon missiles, 21 Rolling Airframe...
swiftness of the procedure was deemed suspicious, because the required stamps and signatures had to be obtained from public institutions that were closed...
are famous. Dieter Aschenborn, wildlife painter and designer of postal stamps Hans Aschenborn, wildlife painter and illustrator Uli Aschenborn, wildlife...
flexible Manufacturing systems for the production of precision components. A Stamp was also issued by Pakistan Post on the occasion of golden jubilee of POF...
People's Democratic Movement (PDM), agreed with the British government that independence would be granted in 1982 if the PDM was reelected in the elections...
diameter of this circle is known as Pitch Circle Diameter, in short PCD. PDM, PDMS product data management, product data manager [app], product data management...
a standard CD player to see the data, just as it would with a standard stamped disc. The resulting discs can be read by most CD-ROM drives and played...
Claudio Chiappucci. LeMond closed in on Chiappucci and on stage 16 he put his stamp of authority on the race during the final climb of Luz Ardiden. Late in...