Polymerization reaction among insoluble monomers in a solution
In polymer chemistry, emulsion polymerization is a type of radical polymerization that usually starts with an emulsion incorporating water, monomers, and surfactants. The most common type of emulsion polymerization is an oil-in-water emulsion, in which droplets of monomer (the oil) are emulsified (with surfactants) in a continuous phase of water. Water-soluble polymers, such as certain polyvinyl alcohols or hydroxyethyl celluloses, can also be used to act as emulsifiers/stabilizers. The name "emulsion polymerization" is a misnomer that arises from a historical misconception. Rather than occurring in emulsion droplets, polymerization takes place in the latex/colloid particles that form spontaneously in the first few minutes of the process. These latex particles are typically 100 nm in size, and are made of many individual polymer chains. The particles are prevented from coagulating with each other because each particle is surrounded by the surfactant ('soap'); the charge on the surfactant repels other particles electrostatically. When water-soluble polymers are used as stabilizers instead of soap, the repulsion between particles arises because these water-soluble polymers form a 'hairy layer' around a particle that repels other particles, because pushing particles together would involve compressing these chains.
Emulsion polymerization is used to make several commercially important polymers. Many of these polymers are used as solid materials and must be isolated from the aqueous dispersion after polymerization. In other cases the dispersion itself is the end product. A dispersion resulting from emulsion polymerization is often called a latex (especially if derived from a synthetic rubber) or an emulsion (even though "emulsion" strictly speaking refers to a dispersion of an immiscible liquid in water). These emulsions find applications in adhesives, paints, paper coating and textile coatings. They are often preferred over solvent-based products in these applications due to the absence of volatile organic compounds (VOCs) in them.
IUPAC definition
Emulsion polymerization: Polymerization whereby monomer(s), initiator, dispersion medium, and possibly colloid stabilizer constitute initially an inhomogeneous system resulting in particles of colloidal dimensions containing the formed polymer.
Note: With the exception of mini-emulsion polymerization, the term “emulsion polymerization” does not mean that polymerization occurs in the droplets of a monomer emulsion.[1]
Batch emulsion polymerization: Emulsion polymerization in which all the ingredients are placed in a reactor prior to reaction.[2]
Advantages of emulsion polymerization include:[3]
High molecular weight polymers can be made at fast polymerization rates. By contrast, in bulk and solution free-radical polymerization, there is a tradeoff between molecular weight and polymerization rate.
The continuous water phase is an excellent conductor of heat, enabling fast polymerization rates without loss of temperature control.
Since polymer molecules are contained within the particles, the viscosity of the reaction medium remains close to that of water and is not dependent on molecular weight.
The final product can be used as is and does not generally need to be altered or processed.
Disadvantages of emulsion polymerization include:
Surfactants and other polymerization adjuvants remain in the polymer or are difficult to remove
For dry (isolated) polymers, water removal is an energy-intensive process
Emulsion polymerizations are usually designed to operate at high conversion of monomer to polymer. This can result in significant chain transfer to polymer.
Can not be used for condensation, ionic, or Ziegler-Natta polymerization, although some exceptions are known.
^Slomkowski, Stanislaw; Alemán, José V.; Gilbert, Robert G.; Hess, Michael; Horie, Kazuyuki; Jones, Richard G.; Kubisa, Przemyslaw; Meisel, Ingrid; Mormann, Werner; Penczek, Stanisław; Stepto, Robert F. T. (2011). "Terminology of polymers and polymerization processes in dispersed systems (IUPAC Recommendations 2011)" (PDF). Pure and Applied Chemistry. 83 (12): 2229–2259. doi:10.1351/PAC-REC-10-06-03. S2CID 96812603. Archived from the original (PDF) on 2013-10-20. Retrieved 2013-07-20.
^Slomkowski, Stanislaw; Alemán, José V.; Gilbert, Robert G.; Hess, Michael; Horie, Kazuyuki; Jones, Richard G.; Kubisa, Przemyslaw; Meisel, Ingrid; Mormann, Werner; Penczek, Stanisław; Stepto, Robert F. T. (2011). "Terminology of polymers and polymerization processes in dispersed systems (IUPAC Recommendations 2011)" (PDF). Pure and Applied Chemistry. 83 (12): 2229–2259. doi:10.1351/PAC-REC-10-06-03. S2CID 96812603. Archived from the original (PDF) on 2013-10-20. Retrieved 2013-07-20.
^Odian, G, Principles of Polymerization, Wiley, New York
and 24 Related for: Emulsion polymerization information
In polymer chemistry, emulsionpolymerization is a type of radical polymerization that usually starts with an emulsion incorporating water, monomers,...
heterogeneous polymerization processes (suspension or emulsion) microemulsion polymerization is a more complicated system. Polymerization rate is controlled...
include emulsionpolymerization, solution polymerization, suspension polymerization, and precipitation polymerization. Although the polymer dispersity...
An emulsion is a mixture of two or more liquids that are normally immiscible (unmixable or unblendable) owing to liquid-liquid phase separation. Emulsions...
acetylene and HF. Emulsionpolymerization can be done at highly reduced pressures and lower temperatures compared to suspension polymerization. The improved...
polyacrylate, like solution polymerization in water, inverse emulsionpolymerization, inverse suspension polymerization, plasma polymerization, and pressure-induced...
In polymer chemistry, free-radical polymerization (FRP) is a method of polymerization by which a polymer forms by the successive addition of free-radical...
Solution polymerization is a method of industrial polymerization. In this procedure, a monomer is dissolved in a non-reactive solvent that contains a...
sometimes with the use of a surfactant. PTFE is also synthesized via emulsionpolymerization, where a surfactant is the primary means of keeping PTFE in an...
Photographic emulsion is a light-sensitive colloid used in film-based photography. Most commonly, in silver-gelatin photography, it consists of silver...
emulsionpolymerization of fluoropolymers and as a building block for the synthesis of perfluoroalkyl-substituted compounds, polymers, and polymeric materials...
acrylate. The polymerization did not require additives or miniemulsion polymerization techniques, as do other Pickering emulsionpolymerizations. Also, by...
modifiers and film formers, and these are typically polymers of acrylic acid fluids. PVAc copolymer emulsion glue of vinyl acetate (VAM) and acrylic acid (VAA)...
Latex is an emulsion (stable dispersion) of polymer microparticles in water. Latices are found in nature, but synthetic latices are common as well. In...
resistance than comparable systems that cure by polymerization or coalescence. The paint type known as Emulsion in the UK and Latex in the United States is...
acetate based polymeremulsions by the process of emulsionpolymerization. Vinyl neodecanoate-containing polymers are used in decorative emulsion paints, plasters...
surfactants are used, in the process known as Emulsionpolymerization, and the surfactant included in the polymer can bioaccumulate. Perfluoroaromatic compounds...
include dimethylformamide and the more volatile butanone. In aqueous emulsionpolymerization, the fluorosurfactant perfluorononanoic acid is used in anion form...
A Ramsden emulsion, sometimes named Pickering emulsion, is an emulsion that is stabilized by solid particles (for example colloidal silica) which adsorb...
by polymerization of the vinyl chloride monomer (VCM), as shown. About 80% of production involves suspension polymerization. Emulsionpolymerization accounts...