Alternating current field measurement (ACFM) is an electromagnetic technique for non-destructive testing detection and sizing of surface breaking discontinuities. It was derived from the methods used in eddy-current testing and works on all metals, ferrous or non-ferrous. Since it doesn't require direct electrical contact with the surface it can work through thin coatings such as paint. This practice is intended for use on welds in any metallic material. [1]
^"Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique". Astm e 2261-03.
and 29 Related for: Alternating current field measurement information
Alternatingcurrentfieldmeasurement (ACFM) is an electromagnetic technique for non-destructive testing detection and sizing of surface breaking discontinuities...
EMF measurements are measurements of ambient (surrounding) electromagnetic fields that are performed using particular sensors or probes, such as EMF meters...
and gather at surface-breaking cracks. Alternatingcurrentfieldmeasurement (ACFM) is similar to eddy current applied to steel. Its most common application...
A current transformer (CT) is a type of transformer that is used to reduce or multiply an alternatingcurrent (AC). It produces a current in its secondary...
electrical engineering, current sensing is any one of several techniques used to measure electric current. The measurement of current ranges from picoamps...
machines of the dynamo type. Alternatingcurrent can also be converted to direct current through use of a rectifier. Direct current may flow in a conductor...
to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with...
voltage, resistance, and current, in which case can be used as a voltmeter, ohmmeter, and ammeter. Some feature the measurement of additional properties...
as "EMI") Alternatingcurrentfieldmeasurement (ACFM) Alternatingcurrent potential drop measurement (ACPD) Barkhausen testing Direct current potential...
electromagnetism, an eddy current (also called Foucault's current) is a loop of electric current induced within conductors by a changing magnetic field in the conductor...
used to measure the current in a circuit. Electric currents are measured in amperes (A), hence the name. For direct measurement, the ammeter is connected...
can be computed using Kirchhoff's circuit laws. When talking about alternatingcurrent (AC) there is a difference between instantaneous voltage and average...
through alternatingmeasurement chambers. Permanent magnets in the rotating gears can transmit a signal to an electric reed switch or current transducer...
is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency...
induction motor that ran on alternatingcurrent. The motor used polyphase current, which generated a rotating magnetic field to turn the motor (a principle...
Walter Rogowski, is an electrical device for measuring alternatingcurrent (AC) or high-speed current pulses. It sometimes consists of a helical coil of wire...
the voltage measurements. As source, the direct current or low frequency alternatingcurrent is used. The interpretation of the measurements can be performed...
wire rotating in a magnetic field produces a current which changes direction with each 180° rotation, an alternatingcurrent (AC). However many early uses...
the waveforms of alternatingcurrent electricity. Steinmetz called his representation a phasor. With the invention of phasor measurement units (PMU) in...
difficulty in accurate measurement of the alternatingcurrent, rather than voltage, and the relatively little need for low-power measurements. The specification...
showing alternating stripes. Scientific understanding of the evolution of the magnetic field of Mars is based on the combination of satellite measurements and...
that is transverse to an electric current in the conductor and to an applied magnetic field perpendicular to the current. It was discovered by Edwin Hall...
quantity. In the physical sciences, quality assurance, and engineering, measurement is the activity of obtaining and comparing physical quantities of real-world...
needed]. The electrodes are usually made of platinum metal. An alternatingcurrent is applied to the outer pair of the electrodes. The potential between...
etc.) define high voltage as above 1000 V for alternatingcurrent, and at least 1500 V for direct current. In the United States, the American National...
such cases, the feedback current varies linearly with the external magnetic field and is used as the basis for measurement. This helps to counter inherent...
In electrical engineering, impedance is the opposition to alternatingcurrent presented by the combined effect of resistance and reactance in a circuit...
computer. In the transmitter, an electronic oscillator generates an alternatingcurrent oscillating at a radio frequency, called the carrier wave because...