This disambiguation page lists articles associated with the title Stress cracking. If an internal link led you here, you may wish to change the link to point directly to the intended article.
Stress corrosion cracking (SCC) is the growth of crack formation in a corrosive environment. It can lead to unexpected and sudden failure of normally ductile...
According to ASTM D883, stresscracking is defined as "an external or internal crack in a plastic caused by tensile stresses less than its short-term...
Sulfide stresscracking (SSC) is a form of hydrogen embrittlement which is a cathodic cracking mechanism. It should not be confused with the term stress corrosion...
Hydrogen embrittlement (HE), also known as hydrogen-assisted cracking or hydrogen-induced cracking (HIC), is a reduction in the ductility of a metal due to...
stress or creep rupture, cyclic stresses or fatigue, the presence of structural flaws and stress-cracking agents. Formations of submicroscopic cracks...
concentration. Glass thickness has no direct effect on thermal cracking in windows because both thermal stress and material strength are proportional to thickness...
around 1 cm. Environmental stresscracking is defined as external or internal cracking in plastic induced by applied tensile stress more than its short-term...
exploited in thermal stresscracking. A beam is focused on the surface causing localized heating and thermal expansion. This results in a crack that can then...
Because of this mechanism, stress fractures are common overuse injuries in athletes. Stress fractures can be described as small cracks in the bone, or hairline...
mechanical properties are changed: stresscracking resistance and toughness in the cold rise, whereas yield stress and heat resistance decrease. With...
chemical resistance. ASA is significantly more resistant to environmental stresscracking than ABS, especially to alcohols and many cleaning agents. n-Butyl...
materials – Behavior of solid objects subject to stresses and strains Stress corrosion cracking – Growth of cracks in a corrosive environment Structural fracture...
formula are used to determine the buckling stress of a column. Buckling may occur even though the stresses that develop in the structure are well below...
Eutectic alloy used for furnace brazing. Copper-rich alloys prone to stresscracking by ammonia. Ag-Zn Silver-zinc. Similar to Cu-Zn, used in jewelry due...
should not be confused with stress corrosion cracking, where corrosion (such as pitting) leads to the development of brittle cracks, growth and failure. The...
and Fleck produced criteria for thermal shock cracking based on fracture toughness controlled cracking. The models were based on thermal shock in ceramics...
The stress concentration factor should not be confused with the stress intensity factor, which is used to define the effect of a crack on the stresses in...
fracture mechanics, the stress intensity factor (K) is used to predict the stress state ("stress intensity") near the tip of a crack or notch caused by a...
usually begin when cracks form at stress points, such as squared corners or bolt holes too close to the material's edge. These cracks grow as the material...
residual stress in the cold-drawn metal of the cartridges, was responsible for the cracking. Season cracking is characterised by deep brittle cracks which...
semi-amorphous plastics are less resistant to chemical attack and environmental stresscracking because they lack a crystalline structure. Brittleness can be decreased...
sub-critical crack growth. This article aims to give a brief overview of the various degradation processes mentioned above. Stress corrosion cracking is a phenomenon...
Global Information