Sensitivity time control (STC), also known as swept-gain control, is a system used to attenuate the very strong signals returned from nearby ground clutter targets in the first few range gates of a radar receiver. Without this attenuation, the receiver would routinely saturate due to the strong signals. This is used in air traffic control systems and has an influence on the shape of the elevation pattern of the surveillance antenna. It is represented in terms of numerical value typically expressed in decibels (dB), starting from zero, indicating that there is no muting and that the radar system is accepting all returns.
The radar equation is based on , meaning that doubling the range to a target results in sixteen times less energy being returned. STC is due to the corollary of this statement - nearby targets return orders of magnitude more radio signal. In the case of a long-range radar with high power outputs, the return from nearby targets can be so powerful that it causes the amplifiers to saturate, producing a blank area on the screen beyond which nothing can be detected until the amplifiers return to normal operation again.
For early radar systems, the solution was to point the signal away from the ground. This can be difficult for ground or ship-based radars, which required other solutions. In the case of the ground-based AMES Type 7, for instance, the radars were installed in natural dish-like depressions so that all returns below a certain angle were cut off very close to the radar. This still had the same effect in terms of causing the amplifiers to saturate, but occurred so rapidly after transmission that the saturation decayed at relatively short ranges. The downside to this approach is that it permanently hides any signal below a certain angle, which for a very long-range system might prevent it from seeing anything near the radar site.
STC addresses this problem by implementing a reverse gain curve with the same characteristics as the radar equation, that is, a dependency or some function close to that (often there are discrete steps). This dramatically damps down amplification of signals received shortly after the detection pulse is sent, preventing them from saturating the receiver. The gain modification is reduced over time, until it reaches zero at some selected distance from the radar site, often on the order of 50 miles (80 km).
Because the system works by muting nearby signals, it may have the side-effect of eliminating small targets near the radar. This is fine for many applications, like air traffic control, where the targets are large and nearby aircraft are often guided using a local-area radar.
and 23 Related for: Sensitivity time control information
Sensitivitytimecontrol (STC), also known as swept-gain control, is a system used to attenuate the very strong signals returned from nearby ground clutter...
coherent transmitter, such as time-domain pulse-amplitude radar. Constant False Alarm Rate, a form of Automatic Gain Control (AGC), is a method that relies...
Sensitivity analysis is the study of how the uncertainty in the output of a mathematical model or system (numerical or otherwise) can be divided and allocated...
Chart for Quality Control in Clinical Chemistry", Clinical Chemistry, vol. 27, pp. 493–501. Saah AJ, Hoover DR (1998). "[Sensitivity and specificity revisited:...
Sensory processing sensitivity (SPS) is a temperamental or personality trait involving "an increased sensitivity of the central nervous system and a deeper...
Misophonia (or selective sound sensitivity syndrome, sound-rage) is a disorder of decreased tolerance to specific sounds or their associated stimuli,...
point-of-care test whole-blood prothrombin time monitors (CoaguChek Mini and TAS PT-NC) by independent international sensitivity index calibration". Br. J. Haematol...
Information sensitivity is the control of access to information or knowledge that might result in loss of an advantage or level of security if disclosed...
Antibiotic sensitivity testing or antibiotic susceptibility testing is the measurement of the susceptibility of bacteria to antibiotics. It is used because...
Multiple chemical sensitivity (MCS), also known as idiopathic environmental intolerances (IEI), is an unrecognized and controversial diagnosis characterized...
A sensitivity reader is someone who reads a literary work, looking for perceived offensive content, stereotypes and bias, creating a report for an author...
useful output to better serve our purposes. Anna Jean Ayres Environmental sensitivity Ideasthesia Developmental coordination disorder Motor coordination Multisensory...
Control theory is a field of control engineering and applied mathematics that deals with the control of dynamical systems in engineered processes and machines...
sufficiently small so that tidal effects are non-measurable (given the sensitivity of current gravity measurement instrumentation, A and B presumably should...
In computer security, mandatory access control (MAC) refers to a type of access control by which a secured environment (e.g., an operating system or a...
high sensitivity and it has relatively good anti-interference ability, a small package and lower price. A remote control is used for controlling substations...
thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are...
sensitivity of the vertical deflection. Another control, often in front of the calibrated selector knob, offers a continuously variable sensitivity over...
Film speed is the measure of a photographic film's sensitivity to light, determined by sensitometry and measured on various numerical scales, the most...
which cannot be ascribed to any other dental disease. A degree of dentin sensitivity is normal, but pain is not usually experienced in everyday activities...
animals generally have lower sensitivity to tear gases. Dogs and horses can therefore be used by police for riot control even when tear gas is used.[citation...
Global Information