This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "SCSI initiator and target" – news · newspapers · books · scholar · JSTOR(December 2009) (Learn how and when to remove this message)
In computer data storage, a SCSI initiator is the endpoint that initiates a SCSI session, that is, sends a SCSI command. The initiator usually does not provide any Logical Unit Numbers (LUNs).
On the other hand, a SCSI target is the endpoint that does not initiate sessions, but instead waits for initiators' commands and provides required input/output data transfers. The target usually provides to the initiators one or more LUNs, because otherwise no read or write command would be possible.
and 27 Related for: SCSI initiator and target information
computer data storage, a SCSIinitiator is the endpoint that initiates a SCSI session, that is, sends a SCSI command. The initiator usually does not provide...
physically cabling SCSI devices (like hard drives and tape changers), an iSCSIinitiator sends SCSI commands over an IP network. An initiator falls into two...
act as a SCSItarget. SCSI-1 andSCSI-2 have the option of parity bit error checking. Starting with SCSI-U160 (part of SCSI-3) all commands and data are...
communication takes place between an initiatorand a target. The initiator sends a command to the target, which then responds. SCSI commands are sent in a Command...
the initiator, unless an expander is used. If one initiator is connected to one target, there is no opportunity for contention; with parallel SCSI, even...
iSCSI, Serial Attached SCSI, and other transport layers. In the SCSI protocol, the initiator sends a SCSI command information unit to the target device...
returned by a SCSI device. When a SCSItarget device returns a check condition in response to a command, the initiator usually then issues a SCSI Request Sense...
LUN: In the early versions of SCSI, an initiator delivers a Command Descriptor Block (CDB) to a target (physical unit) and within the CDB is a 3-bit LUN...
SCSI ports: initiator ports, target ports andtarget/initiator ports. A SCSI device may contain any combination of initiator ports, target ports and target/initiator...
SCSI device needs to report an error. SCSI communication takes place between an initiatorand a target. The initiator sends a command to the target which...
and an initiator (a client accessing the target) with the targetinitiating data transfers. In other words, when an initiator writes data to a target...
execute a SCSI command. The initiator usually then issues a SCSI Request Sense command in order to obtain a Key Code Qualifier (KCQ) from the target. This...
the implementation to set priorities. Master/slave (technology) SCSIinitiatorandtarget How Bus Mastering Works - Tweak3D What is bus mastering?- Brevard...
from target to initiator) or a write (data sent from an initiator to target). PCI targets must examine the command code as well as the address and not...
host system and a peripheral SCSI device or storage system. These adapters manage service and task communication between the host andtarget. Typically...
SCSI connection, a contingent allegiance condition occurs while a SCSI device reports an error. SCSI communication takes place between an initiator and...
SCSI port/transceiver 10h - language 11h - communication port 12h - voltage sensor 13h - current sensor 14h - SCSItarget port 15h - SCSIinitiator port...
iSCSI conformance testing is testing to determine whether an iSCSIInitiator/Target meets the iSCSI standard. The Small Computer System Interface (SCSI)...
copying on the targetandinitiator. The Datamover Architecture (DA) defines an abstract model in which the movement of data between iSCSI end nodes is...
SCSI Enclosure Services (SES) is a protocol for more modern SCSI enclosure products. An initiator can communicate with the enclosure using a specialized...
TFTP, AFP, rsync, Unison (file synchronizer), iSCSI (initiatorandtarget), HAST, CARP, Bridge, UPnP, and BitTorrent. All of this is configurable through...
gateway devices, and cables. SAN network devices move data within the SAN, or between an initiator, such as an HBA port of a server, and a target, such as the...
July 2011. StarWind Free AoE Initiator for Microsoft Windows WinAoE Driver: A bootable, open source AoE initiator, EOL-ed and phased out by WinVBlock successor...
for processing SCSI commands. Target drivers which receive SCSI commands from a SCSIinitiator, pass these SCSI to the SCST core and send back replies...
Service (iSNS) protocol allows automated discovery, management and configuration of iSCSIand Fibre Channel devices (using iFCP gateways) on a TCP/IP network...
remote workstations and DAEMON Tools iSCSITarget 2 – a cross-platform solution that enables creating an iSCSI storage server and provides access to virtual...
SCSItarget devices provide a number of SCSI mode pages. These can be interrogated by a MODE SENSE command and set by a MODE SELECT command. The MODE SENSE...