This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "SCSI check condition" – news · newspapers · books · scholar · JSTOR(December 2009) (Learn how and when to remove this message)
The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "SCSI check condition" – news · newspapers · books · scholar · JSTOR(November 2017) (Learn how and when to remove this message)
In computer terminology, a Check Condition occurs when a SCSI device needs to report an error.
SCSI communication takes place between an initiator and a target. The initiator sends a command to the target which then responds. SCSI commands are sent in a Command Descriptor Block (CDB). At the end of the command the target returns a Status Code byte which is usually 00h for success, 02h for a Check Condition (error), or 08h for busy.
When the target returns a Check Condition in response to a command, the initiator usually then issues a SCSI Request Sense command in order to obtain more information. During the time between the reporting of a Check Condition and the issuing of a Request Sense command, the target is in a special state called a Contingent Allegiance Condition.
and 16 Related for: SCSI check condition information
In computer terminology, a CheckCondition occurs when a SCSI device needs to report an error. SCSI communication takes place between an initiator and...
that can act as a SCSI target. SCSI-1 and SCSI-2 have the option of parity bit error checking. Starting with SCSI-U160 (part of SCSI-3) all commands and...
returned by a SCSI device. When a SCSI target device returns a checkcondition in response to a command, the initiator usually then issues a SCSI Request Sense...
On a computer SCSI connection, a contingent allegiance condition occurs while a SCSI device reports an error. SCSI communication takes place between an...
a CheckCondition), or 08h for busy. When the target returns a CheckCondition in response to a command, the initiator usually then issues a SCSI Request...
A SCSI Status Code is used to determine the success or failure of a SCSI command. At the end of any command, the target returns a Status Code byte which...
standard interface cables such as SATA (Serial ATA), USB, SAS (Serial Attached SCSI), or PATA (Parallel ATA) cables. The first production IBM hard disk drive...
addi $9, $0, 1 # set first number to add = 1 loop: slti $10, $9, 1000 # check if the number is less than 1000 beq $10, $0, finish # if odd number is greater...
will check CPL against the interrupt descriptor's DPL field as an access-rights check, while F1 will not. In virtual-8086 mode, CD 01 will also check CPL...
server hardware running virtualization software. It is interoperable with SCSI-based Wang VS tape and disk drives, which provide a means of restoring VS...
initialization of the setup process; Windows Vista supports loading drivers for SATA, SCSI, and RAID controllers from any external source in addition to floppy diskettes...
corruption. In Windows XP, new verification options have been added for DMA, I/O, SCSI and deadlock detection to Driver Verifier. Driver Verifier Manager, a GUI...
by EMC, Dell and Qnap storages with RAID5 discs interconnected with the iSCSI technology for a total space of 170 TByte. The second server farm is mainly...
Global Information
