This article uses bare URLs, which are uninformative and vulnerable to link rot. Please consider converting them to full citations to ensure the article remains verifiable and maintains a consistent citation style. Several templates and tools are available to assist in formatting, such as reFill (documentation) and Citation bot (documentation).(August 2022) (Learn how and when to remove this message)
Pressure angle in relation to gear teeth, also known as the angle of obliquity,[1] is the angle between the tooth face and the gear wheel tangent. It is more precisely the angle at a pitch point between the line of pressure (which is normal to the tooth surface) and the plane tangent to the pitch surface. The pressure angle gives the direction normal to the tooth profile. The pressure angle is equal to the profile angle at the standard pitch circle and can be termed the "standard" pressure angle at that point. Standard values are 14.5 and 20 degrees.[2] Earlier gears with pressure angle 14.5 were commonly used because the cosine is larger for a smaller angle, providing more power transmission and less pressure on the bearing; however, teeth with smaller pressure angles are weaker. To run gears together properly their pressure angles must be matched.[3]
The pressure angle is also the angle of the sides of the trapezoidal teeth on the corresponding rack.
The force transmitted during the mating of gear teeth acts along the normal. This force has components along the pitch line and the other along the line perpendicular to the pitch line. The force along the pitch line which is responsible for power transmission is proportional to the cosine of pressure angle. The one which exerts thrust (perpendicular to the pitch line) is proportional to the sine of pressure angle. So it is advised to keep the pressure angle low.
Just as there are three types of profile angle, there are three types of corresponding pressure angle: the transverse pressure angle, the normal pressure angle, and the axial pressure angle.[4]
^Halsey, Frederick Arthur (1913). Handbook for Machine Designers and Draftsmen. McGraw-Hill book Company, Incorporated. p. 87.
^Gear Nomenclature, Definition of Terms with Symbols. American Gear Manufacturers Association. 2005. p. 72. ISBN 1-55589-846-7. OCLC 65562739. ANSI/AGMA 1012-G05.
^"Involute Gear and Spline Software - Gear definitions and formulas".
Pressureangle in relation to gear teeth, also known as the angle of obliquity, is the angle between the tooth face and the gear wheel tangent. It is more...
open-angle glaucoma, the draining is impeded, causing the liquid to accumulate and pressure inside the eye to increase. This elevated pressure can damage...
of an involute gear depends only on the number of teeth on the gear, pressureangle, and pitch. That is, a gear's profile does not depend on the gear it...
as ε, the involute roll angle is the angle whose arc on the base circle of radius unity equals the tangent of the pressureangle at a selected point on...
in which the profile angle or the pressureangle lies, such as transverse profile angle, normal pressureangle, axial profile angle. In tools for cutting...
a pitch circle subtended by the angle of action. Pressureangle, θ {\displaystyle \theta } The complement of the angle between the direction that the teeth...
given temperature and pressure has a unique equilibrium contact angle. However, in practice a dynamic phenomenon of contact angle hysteresis is often observed...
Kurt Steven Angle (born December 9, 1968) is an American retired professional wrestler and collegiate wrestler. He became a gold medalist in freestyle...
and large pneumatic grinders. Angle grinders have been used to remove wheel clamps from vehicles. Through a sound pressure level and vibrations study conducted...
: 445 Gauge pressure (also spelled gage pressure) is the pressure relative to the ambient pressure. Various units are used to express pressure. Some of these...
intraocular pressure. The anterior chamber angle is the structure which determines the anterior chamber depth. An extremely narrow anterior chamber angle is a...
{\displaystyle \theta } is the wetting angle of the liquid on the surface of the capillary The force down formula for capillary pressure is seen as: p c = π r 2 h...
position of the center of pressure moves when the angle of attack changes. the slope of the lift coefficient versus angle of attack line is 2 π {\displaystyle...
Normal pressure hydrocephalus (NPH), also called malresorptive hydrocephalus, is a form of communicating hydrocephalus in which excess cerebrospinal fluid...
stress friction angle φ'cs Effective soil stress friction angle at critical state The in situ lateral pressure of soil is called earth pressure at rest and...
they form a contact angle, θ, which is the angle the tangent to the surface makes with the solid surface. Note that the angle is measured through the...
Radiation pressure (also known as light pressure) is mechanical pressure exerted upon a surface due to the exchange of momentum between the object and...
In vehicle dynamics, slip angle or sideslip angle is the angle between the direction in which a wheel is pointing and the direction in which it is actually...
self-locking. Whether a worm drive is self-locking depends on the lead angle, the pressureangle, and the coefficient of friction. The invention of the worm drive...
way to measure surface energy is through contact angle experiments. In this method, the contact angle of the surface is measured with several liquids,...
The caster angle or castor angle is the angular displacement of the steering axis from the vertical axis of a steered wheel in a car, motorcycle, bicycle...
Pressure cooking is the process of cooking food under high pressure steam and water or a water-based cooking liquid, in a sealed vessel known as a pressure...
airfoil at a given angle of attack will have what is called a pressure distribution. This pressure distribution is simply the pressure at all points around...
A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure. Construction methods...
the fundamental rack is straight-sided, with sides inclined at the pressureangle of the tooth form, with flat top and bottom. The necessary addendum...