Class of 0-6-0T locomotives designed by Wilson Worsdell
This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources. Find sources: "NER Class E1" – news · newspapers · books · scholar · JSTOR(December 2016)
NER Class E1 LNER Class J72
69007 at Sunderland South Dock depot
Type and origin
Power type
Steam
Designer
Wilson Worsdell
Builder
Darlington Works (78)
Armstrong Whitworth (25)
Doncaster Works (10)
Build date
1898–1951
Total produced
113
Specifications
Configuration:
• Whyte
0-6-0T
Gauge
4 ft 8+1⁄2 in (1,435 mm)
Driver dia.
4 ft 1+1⁄4 in (1.251 m)
Loco weight
38.6 long tons (39.2 t)
Fuel type
Coal
Boiler pressure
140 lbf/in2 (0.97 MPa)
Cylinders
Two, inside
Cylinder size
17 in × 24 in (432 mm × 610 mm)
Performance figures
Tractive effort
16,760 lbf (74.55 kN)
Career
Operators
North Eastern Railway
London and North Eastern Railway
British Railways
Power class
2F
Axle load class
LNER/BR: Route availability 2
Withdrawn
1958–1964
Disposition
One preserved, remainder scrapped
The North Eastern Railway Class E1, classified as Class J72 by the London and North Eastern Railway (LNER), is a class of small 0-6-0T steam locomotives designed by Wilson Worsdell for shunting. They had inside cylinders and Stephenson valve gear.
They were a development of the earlier NER Class E (LNER Class J71) 0-6-0T designed by T.W. Worsdell who was Wilson Worsdell's brother.
Part A - Class J71 & J72. Nottingham: Book Law Publications. ISBN 1-899624-86-4. Wikimedia Commons has media related to NERClassE1 / LNER Class J72. The...
LB&SCR E1class, an 1874 British 0-6-0 steam locomotive NCC ClassE1, a Northern Counties Committee Irish steam locomotive NERClassE1, an 1898 class of...
cylinders and Stephenson valve gear and were the basis for the later NERClassE1 (LNER Class J72). Eighty-one of them passed into British Railways ownership...
steam and diesel locomotives, including BR standard class 2. The equivalent of the NERClassE1 (LNER J72) 0-6-0 tank locomotive had been built, virtually...
locomotive LNER Class J50 – continuation of a GNR design. Thirty were rebuilds of Class J51. LNER Class J72 – NERClassE1 LNER Class J94 – WD Austerity...
peer-reviewed monthly journal Joem, the only survivor of the British NERClassE1 steam locomotives This disambiguation page lists articles associated...
NERClass P3 (LNER Class J27) 0-6-0 NERClassE1 (LNER Class J72) 0-6-0T NERClass R (LNER Class D20) 4-4-0 NERClass R1 (LNER Class D21) 4-4-0 NER Class...
Whitworth between 1913 and 1921 to the design of Vincent Raven, based on the NERClass T and T1 (LNER Q5). The batch of fifty built by Armstrong Whitworth from...
The NERClass Z (LNER Class C7) was an Atlantic class of locomotives designed by Vincent Raven. It was introduced in 1911. Vincent Raven had been appointed...
The NERClass A (LNER Class F8) was a class of 2-4-2 tank locomotives designed by Thomas William Worsdell and built at Gateshead works for the North Eastern...
(NER) 1001 Class was a class of long-boiler 0-6-0 steam locomotive originally designed by William Bouch for the Stockton and Darlington Railway. A NER...
The NERClass V was a class of twenty steam locomotives of the 4-4-2 wheel arrangement. They were designed by Wilson Worsdell for the North Eastern Railway...
then 30 further units were built, designated Class Q (LNER Class D17/2). Classification was complex. The NER initially classified these locomotives "M1"...
The NERClass 290 (LNER Class J77) was a class of 0-6-0T steam locomotives of the North Eastern Railway (NER), rebuilt from an earlier class of 0-4-4T...
members of this class were fitted with Westinghouse Brakes - all of this equipment was removed during the 1930s. After World War I, the NER experienced an...
The North Eastern Railway (NER) Class P3, classified J27 by the LNER, is a class of 0-6-0 steam locomotive. The P3 Class was designed by Wilson Worsdell...
Eastern Railway (LNER) Class A2 was a class of 4-6-2 steam locomotive designed by Vincent Raven for the North Eastern Railway (as NERclass 4.6.2). Two were...
4-6-0 steam locomotive designed by Vincent Raven. The design was based on NERClass S. The first seven were built with saturated (non-superheated) boilers...
The NERClass R1 (LNER Class D21) was a class of 4-4-0 steam locomotives of the North Eastern Railway. The class was designed by Wilson Worsdell and built...
The NERClass R (later, LNER Class D20) was a class of 4-4-0 steam locomotive, designed by Wilson Worsdell for the North Eastern Railway. They passed...
Eastern Railway (NER) Class C1, was a class of 0-6-0 freight locomotives designed by T.W. Worsdell. They were used throughout the NER system, although...
The NERClass O (LNER Class G5) was a class of 0-4-4T steam locomotives of the North Eastern Railway, designed by the company's Chief Engineer, Wilson...
The North Eastern Railway (NER) Class K classified as Class Y8 by the London and North Eastern Railway (LNER) is a class of 0-4-0T steam locomotives designed...
The NER 38 Class was a class of 4-4-0 steam locomotives designed by Alexander McDonnell for the North Eastern Railway. Twenty-eight were built in 1884–5...
NER 901 Class was a class of 2-4-0 steam locomotive of the North Eastern Railway, designed by Edward Fletcher. Between 1872 and 1882 55 of the class were...
The NER 708 Class was a class of 0-6-0 freight steam locomotive of the North Eastern Railway, designed by Edward Fletcher in 1870. A total of seventy-of...
The North Eastern Railway (NER) Class H, classified as Class Y7 by the London and North Eastern Railway (LNER) is a class of 0-4-0T steam locomotives designed...
Railway Class T3, classified as Class Q7 by the LNER, is a class of 0-8-0 steam locomotive designed for heavy freight. Five were built by the NER in 1919...
Global Information
