results in a smaller wear scar is considered to have higher lubricity. For this reason, lubricity is also termed a substance's anti-wear property. Examples...
fuel's quality include (but are not limited to) energy content, density, lubricity, cold-flow properties and sulphur content. The cetane number of a fuel...
Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)". www.astm.org. Retrieved 2018-08-08. "HFRR best test for lubricity". www...
of the most important additives include those used for viscosity and lubricity, contaminant control, for the control of chemical breakdown, and for seal...
or cooling the surfaces. The property of reducing friction is known as lubricity. In addition to industrial applications, lubricants are used for many...
chemically different "esters" due to their polarity and usually excellent lubricity are used for various reasons as either "additives" or "base stocks" for...
to 1,000 ppm, which therefore means it has better lubricity and does not currently require a lubricity additive as all pipeline diesel fuels require.[citation...
(high crystalline) the better the lubricity and resistance to oxidation. For applications where only a minor lubricity is needed and a more thermally insulating...
requirements over FA with regard to lubricity, detergency, exhaust smoke and exhaust system blocking. JASO FC – lubricity and initial torque requirements...
the fat will penetrate it to varying degrees, contributing richness, lubricity, its own flavour, and calories. Frying techniques vary in the amount of...
The process of removing sulphur from the fuel impacts the viscosity and lubricity of the marine gas oil though, which could cause damage in the engine fuel...
compounds. Lubricity of fuel plays an important role in wear that occurs in an engine. A diesel engine relies on its fuel to provide lubricity for the metal...
aliphatic chains then line up towards the outside of the fiber, imparting lubricity. Fabric softeners impart anti-static properties to fabrics, and thus prevent...
the decal the ability to slide off the paper and onto the substrate (lubricity). Water slide decals are thinner than many other decorative techniques...
DCI-4A, widely used in commercial and military jet fuels, acts also as a lubricity additive. Can be also used for gasolines and other distillate fuels. DCI-6A...
retention. Others manufacture blades that are polymer-coated to enhance lubricity during a cut. Scalpels may be single-use disposable or re-usable. Re-usable...
candies; research shows that "hard, round foods with high elasticity or lubricity properties, or both, pose a significant level of risk," especially to...
Manganese phosphate coatings are used both for corrosion resistance and lubricity and are applied only by immersion. Iron phosphate coatings are typically...
1–100 μm is a common dry lubricant. Few alternatives exist that confer high lubricity and stability at up to 350 °C in oxidizing environments. Sliding friction...
applications needing high temperature stability, very low volatility, inherent lubricity, and/or radiation resistance. Perfluoropolyether oils are their more chemically...
to alternate the material properties (i.e. strength, durometer, color, lubricity) amongst the individual layers or even down the length of the part, resulting...
oils in a reproducible way. It is not to be confused with some smaller lubricity testers that are also often erroneously called Timken: the confusion originates...
Class 1 Class 1 EN ISO 2160 Oxidation Stability g/m3 - 25 EN ISO 12205 Lubricity, corrected wear scar diameter (wsd 1.4) at 60 °C μm - 460 EN ISO 12156-1...
Global Information