Liquid additive manufacturing (LAM) is an additive manufacturing technique which deposits a liquid or high viscosity material (e.g Liquid Silicone Rubber) onto a build surface to create an object which then vulcanised using heat to harden the object.[1][2][3] The process was originally created by Adrian Bowyer and was then built upon by the company German RepRap.[1][4][5][6][7]
^ ab"German RepRap introduces L280, first Liquid Additive Manufacturing (LAM) production-ready 3D printer". 3ders.org. Retrieved 2019-04-13.
^Davies, Sam (2018-11-02). "German RepRap to present series-ready Liquid Additive Manufacturing system at Formnext". TCT Magazine. Retrieved 2019-04-13.
^Scott, Clare (2018-11-02). "German RepRap to Present Liquid Additive Manufacturing and L280 3D Printer at Formnext". 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing. Retrieved 2019-04-13.
^"German RepRap develops new polyurethane material for Liquid Additive Manufacturing". TCT Magazine. 2017-08-02. Retrieved 2019-04-13.
^"Dow and Dassault collaborate on QUANT-U silicone 3D printed footwear". 3D Printing Media Network. 2019-01-29. Retrieved 2019-04-13.
^Saunders, Sarah (2017-08-02). "German RepRap Introduces New Polyurethane Material, Developed with ebalta Kunststoff for Liquid Additive Manufacturing Process". 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing. Retrieved 2019-04-13.
and 28 Related for: Liquid additive manufacturing information
Liquidadditivemanufacturing (LAM) is an additivemanufacturing technique which deposits a liquid or high viscosity material (e.g Liquid Silicone Rubber)...
3D printing or additivemanufacturing is the construction of a three-dimensional object from a CAD model or a digital 3D model. It can be done in a variety...
additivemanufacturing. 3D printing is also known as additivemanufacturing, because the numerous available 3D printing process tend to be additive in...
are additive and subtractive. Major strides in additivemanufacturing have come about recently and are at the forefront of digital manufacturing. These...
Cold spray additivemanufacturing (CSAM) (also called cold spray 3D printing) is a particular application of cold spraying, able to fabricate freestanding...
Liquid smoke is a water-soluble yellow to red liquid used as a flavoring as a substitute for cooking with wood smoke while retaining a similar flavor....
(called "indirect additives") in the manufacturing process, through packaging, or during storage or transport. To regulate these additives and inform consumers...
In-space manufacturing uses processes such as additivemanufacturing (printing a 3D object in successive layers), subtractive manufacturing (making 3D...
of the part or assembly is usually done using 3D printing or "additive layer manufacturing" technology. The first methods for rapid prototyping became available...
undiluted additives. The general process for the manufacture of masterbatches involves first identifying and weighing the needed pigments and/or additives, then...
control is by blending two or more liquids of differing viscosities in precise ratios. In addition, various additives exist which can modulate the temperature-dependence...
Selective laser sintering (SLS) is an additivemanufacturing (AM) technique that uses a laser as the power and heat source to sinter powdered material...
inkjet" and "drop-on-powder" printing, is a rapid prototyping and additivemanufacturing technology for making objects described by digital data such as...
E-liquid is the mixture used in vapor products such as e-cigarettes and usually contain propylene glycol, glycerin, nicotine, flavorings, additives, and...
the unit of manufactured material is typically measured in units of either kg, mm or cm3, depending on the type of additivemanufacturing technique. The...
using ionic liquids as additives to lubricating oils, often with the motivation to replace widely used, ecologically harmful lubricant additives. However...
as sabudana khichri. In Brazil, the pearls are cooked with wine or other liquid to add flavor and are called sagu. Making jelly-like desserts from starch...
the term "FDM". 3D printing, also referred to as additivemanufacturing (AM), involves manufacturing a part by depositing material layer by layer. There...
quantities, additivemanufacturing (AM) represents an effective approach, and is the subject of significant research and development. Unlike the additive manufacturing...
it is used widely in the manufacture of pesticides, explosives, fibers, and coatings. Nitromethane is used as a fuel additive in various motorsports and...
yield preceramic polymers, which can be photopolymerised for the additivemanufacturing of polymer derived ceramics by stereolithography techniques. Silicones...
Liquid fuels are combustible or energy-generating molecules that can be harnessed to create mechanical energy, usually producing kinetic energy; they also...
laser melting (SLM) is one of many proprietary names for a metal additivemanufacturing (AM) technology that uses a bed of powder with a source of heat...
or color additive, is any dye, pigment, or substance that imparts color when it is added to food or drink. They can be supplied as liquids, powders,...
and one of the two reduced forms of erythrulose. It is used as a food additive and sugar substitute. It is synthesized from corn using enzymes and fermentation...
custom color and additive solutions. The company's headquarters are located in Cuyahoga Falls, Ohio, with additional manufacturing sites across North...
accounts for around 90% of manufactured glass. Over the centuries, more expensive, or more technically difficult additives have produced borosilicate...
liquid state. Glasses can be made of quite different classes of materials: inorganic networks (such as window glass, made of silicate plus additives)...
Global Information