Technique used to study the properties of some materials
Analytical gas chromatography A (top) compared with inverse gas chromatography B (bottom). While in gas chromatography a sample containing multiple species is separated into its components on a stationary phase, Inverse gas chromatography uses injection of a single species to probe the characteristics of a stationary phase sample.
Inverse gas chromatography is a physical characterization analytical technique that is used in the analysis of the surfaces of solids.[1]
Inverse gas chromatography or IGC is a highly sensitive and versatile gas phase technique developed over 40 years ago to study the surface and bulk properties of particulate and fibrous materials. In IGC the roles of the stationary (solid) and mobile (gas or vapor) phases are inverted from traditional analytical gas chromatography (GC); IGC is considered a materials characterization technique (of the solid) rather than an analytical technique (of a gas mixture). In GC, a standard column is used to separate and characterize a mixture of several gases or vapors. In IGC, a single standard gas or vapor (probe molecule) is injected into a column packed with the solid sample under investigation.
During an IGC experiment a pulse or constant concentration of a known gas or vapor (probe molecule) is injected down the column at a fixed carrier gas flow rate. The retention time of the probe molecule is then measured by traditional GC detectors (i.e. flame ionization detector or thermal conductivity detector). Measuring how the retention time changes as a function of probe molecule chemistry, probe molecule size, probe molecule concentration, column temperature, or carrier gas flow rate can elucidate a wide range of physico-chemical properties of the solid under investigation. Several in depth reviews of IGC have been published previously.[2][3]
IGC experiments are typically carried out at "infinite dilution", where only small amounts of probe molecule are injected. This region is also called Henry's law region or linear region of the sorption isotherm. At infinite dilution probe-probe interactions are assumed negligible and any retention is only due to probe-solid interactions. The resulting retention volume, VRo, is given by the following equation:
where j is the James–Martin pressure drop correction, m is the sample mass, F is the carrier gas flow rate at standard temperature and pressure, tR is the gross retention time for the injected probe, to is the retention time for a non-interaction probe (i.e. dead-time), and T is the absolute temperature.
^Mohammadi-Jam, S.; Waters, K.E. (2014). "Inverse gas chromatography applications: A review". Advances in Colloid and Interface Science. 212: 21–44. doi:10.1016/j.cis.2014.07.002. ISSN 0001-8686.
^J. Condor and C. Young, Physicochemical measurement by gas chromatography, John Wiley and Sons, Chichester, UK (1979)
^F. Thielmann, Journal of Chromatography A. 1037 (2004) 115.
and 21 Related for: Inverse gas chromatography information
Inversegaschromatography is a physical characterization analytical technique that is used in the analysis of the surfaces of solids. Inversegas chromatography...
Gaschromatography (GC) is a common type of chromatography used in analytical chemistry for separating and analyzing compounds that can be vaporized without...
surrounded by water or other liquids. Inversegaschromatography is a technique which studies the interaction of gases and vapours with a surface - measurements...
provisional government of Iraq from July 13, 2003 to June 1, 2004 Inversegaschromatography, an analytical technique in the analysis of the surfaces of solids...
surface properties of the metakaolins can be characterized by inversegaschromatography analysis. Considered to have twice the reactivity of most other...
Colin F. (2015-11-20). "Ionization-based detectors for gaschromatography". Journal of Chromatography A. Instrumentation and Automation for the Separation...
in dioxin/polychlorinated biphenyl sample preparation". Journal of Chromatography A. 943 (2): 295–97. doi:10.1016/S0021-9673(01)01466-2. PMID 11833649...
is given by the inverse ratio of the square roots of the masses of the gas particles. Rate of effusion of gas 1 Rate of effusion of gas 2 = M 2 M 1 {\displaystyle...
be separated using gaschromatography. This technique separates molecules based on their polarity and size, which both inversely affect boiling point...
and quantity, and inversely with volume: p = n R T V , {\displaystyle p={\frac {nRT}{V}},} where: p is the absolute pressure of the gas, n is the amount...
applied in gel permeation chromatography (GPC) also known as size exclusion chromatography (SEC). As with any chromatography it is used to separate mixtures...
vortex, where most particles rotate about some straight axis, with speed inversely proportional to their distances to that axis. A small parcel of continuum...
determined by gaschromatography (GC), or more reliably by gaschromatography combined with mass spectrometry (GC/MS). Liquid chromatography (LC) techniques...
{\displaystyle \chi (\mathbf {X} ,t)\,\!} , F {\displaystyle \mathbf {F} } has the inverse H = F − 1 {\displaystyle \mathbf {H} =\mathbf {F} ^{-1}\,\!} , where H...
techniques are used for this separation: capillary gaschromatography, high performance liquid chromatography, and capillary electrophoresis. Other technique...
drug-target interactions by observing changes in protein stability or drug chromatography upon binding. Computational techniques complement the chemoproteomic...
{\displaystyle u} and the area A {\displaystyle A} of each plate, and inversely proportional to their separation y {\displaystyle y} : F = μ A u y . {\displaystyle...
antidepressant. Diphenhydramine can be quantified in blood, plasma, or serum. Gaschromatography with mass spectrometry (GC-MS) can be used with electron ionization...
Global Information
