Network system for establishing a fault-tolerant default gateway
Not to be confused with High-availability Seamless Redundancy.
In computer networking, the Hot Standby Router Protocol (HSRP) is a Cisco proprietary redundancy protocol for establishing a fault-tolerant default gateway. Version 1 of the protocol was described in RFC 2281 in 1998. Version 2 of the protocol includes improvements and supports IPv6 but there is no corresponding RFC published for this version.
The protocol establishes an association between gateways in order to achieve default gateway failover if the primary gateway becomes inaccessible. HSRP gateways send multicast hello messages to other gateways to notify them of their priorities (which gateway is preferred) and current status (active or standby).
and 22 Related for: Hot Standby Router Protocol information
In computer networking, the HotStandbyRouterProtocol (HSRP) is a Cisco proprietary redundancy protocol for establishing a fault-tolerant default gateway...
functionality similar to Virtual Router Redundancy Protocol (VRRP) and to Cisco Systems' HotStandbyRouterProtocol (HSRP). It is implemented in several BSD-based...
Redundancy Protocol First Hop Redundancy ProtocolsHotStandbyRouterProtocol Virtual Router Redundancy Protocol First Hop Redundancy Protocols Configuration...
to listen to ff02::1:ff28:9c5a, a client must send a MLD report to the router, containing the multicast address, to indicate that it wants to listen to...
of those protocols. Common Address Redundancy Protocol Virtual Router Redundancy ProtocolHotStandbyRouterProtocol Spanning Tree Protocol Configuration...
non-canonical form, MSB format, IBM format, or Token Ring format. HotStandbyRouterProtocol MAC filtering Network management Sleep Proxy Service, which may...
ensure that a hot-plugged card is fully inserted. The WAKE# pin uses full voltage to wake the computer, but must be pulled high from the standby power to indicate...
change of devices during operation, or even master redundancy with HotStandby. Thus the combination of the topology variations and different network...
the multiple servers will often be configured in a dual-redundant or hot-standby formation providing continuous control and monitoring in the event of...
instead of dedicated channels for GRS, and Dynamic RNLs Tivoli OPC – Hotstandby support for the controller RACF (IBM's mainframe security software product)...
UniPro (or Unified Protocol) is a high-speed interface technology for interconnecting integrated circuits in mobile and mobile-influenced electronics....
transaction reaching the synchronous standby. Standby servers can be synchronous or asynchronous. Synchronous standby servers can be specified in the configuration...
down-level management, WS-Management protocol Integration services for Windows guests distributed through Windows Update Hot add and remove for network adapters...
25 communications protocol. Subsequent products were developed for a number of data communications and voice communications protocols. Trillium's primary...
of a WLAN router is only a tenth of that of a cell phone, although this drops by a further 80% at a distance of just one meter. The router can be set...
connection and using IEC AIS standardized protocol all the way to the VTS users. The base stations have hot-standby units (IEC 62320-1) and the network is...
to two of these cards can be installed in a chassis to provide active/standby or stateful failover. The line cards provide port connectivity and service...
for any utility side device even if it is more capable e.g. a fiber optic router) Smart distribution boards and circuit breakers integrated with home control...
Europe and Australia have severely restricted its use, since the Montreal Protocol of 1987. Less severe restrictions have been implemented in the United States...
and the Kargil War. It has dedicated one brigade of troops to the UN's standby arrangements. Through its large, sustained troop commitments India has...