Gateway Load Balancing Protocol (GLBP) is a Cisco proprietary protocol that attempts to overcome the limitations of existing redundant router protocols by adding basic load balancing functionality.
In addition to being able to set priorities on different gateway routers, GLBP allows a weighting parameter to be set. Based on this weighting (compared to others in the same virtual router group), ARP requests will be answered with MAC addresses pointing to different routers. Thus, by default, load balancing is not based on traffic load, but rather on the number of hosts that will use each gateway router. By default, GLBP load balances in round-robin fashion.
GLBP elects one AVG (Active Virtual Gateway) for each group. Other group members act as backup in case of AVG failure. In case there are more than two members, the second best AVG is placed in the Standby state and all other members are placed in the Listening state. This is monitored using hello and holdtime timers, which are 3 and 10 seconds by default. The elected AVG then assigns a virtual MAC address to each member of the GLBP group, including itself, thus enabling AVFs (Active Virtual Forwarders). Each AVF assumes responsibility for forwarding packets sent to its virtual MAC address. There could be up to four AVFs at the same time.
By default, GLBP routers use the local multicast address 224.0.0.102 to send hello packets to their peers every 3 seconds over UDP 3222 (source and destination).
Cisco implemented IPv6 support for GLBP in IOS release 12.2(33)SXI.[1]
^First Hop Redundancy Protocols Configuration Guide, Cisco IOS Release 15SY by Cisco Systems
and 26 Related for: Gateway Load Balancing Protocol information
GatewayLoadBalancingProtocol (GLBP) is a Cisco proprietary protocol that attempts to overcome the limitations of existing redundant router protocols...
Redundancy Protocol (CARP) – a non-proprietary, patent-free, and unrestricted alternative to HSRP and VRRP GatewayLoadBalancingProtocol – a Cisco Systems...
Enhanced Interior Gateway Routing Protocol (EIGRP) is an advanced distance-vector routing protocol that is used on a computer network for automating routing...
host ID are different. Free and open-source software portal GatewayLoadBalancingProtocol (GLBP) HSRP pfsync VRRP IP network multipathing (IPMP) ucarp...
Border GatewayProtocol (BGP) is a standardized exterior gatewayprotocol designed to exchange routing and reachability information among autonomous systems...
Ethernet multicast, and at the internet layer (layer 3 for OSI) for Internet Protocol Version 4 (IPv4) or Version 6 (IPv6) multicast. IPv4 multicast addresses...
proxy and do loadbalancing of WebSocket applications. HTTP/1.1 Upgrade (101 Switching Protocols) HTTP/2 protocol support HTTP/3 protocol support (experimental...
RIPv1 enabled router will then perform what is known as equal-cost loadbalancing for IP packets. RIPv1 enabled routers not only request the routing tables...
Protocol (WCCP) is a Cisco-developed content-routing protocol that provides a mechanism to redirect traffic flows in real-time. It has built-in load balancing...
protocols and algorithms include Routing Information Protocol (RIP), Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP)...
as well. IP spoofing is also used in some server-side loadbalancing. It lets the loadbalancer spray incoming traffic, but not need to be in the return...
that supports Geneve overlay networks. It is also supported by AWS GatewayLoadBalancers. J. Gross; I. Ganga; T. Sridhar, eds. (November 2020). Geneve: Generic...
Common Address Redundancy Protocol (CARP) and Proxy ARP. In addition, if there are multiple actual IP addresses, loadbalancing can be performed as part...
the complexity of the request, or provide additional benefits such as loadbalancing, privacy, or security. Proxies were devised to add structure and encapsulation...
with Border GatewayProtocol using the shortest-path metric to choose destinations. Anycast methods are useful for global loadbalancing and are commonly...
The Address Resolution Protocol (ARP) is a communication protocol used for discovering the link layer address, such as a MAC address, associated with a...
Edition included array support, integrated Network LoadBalancing (NLB), and Cache Array Routing Protocol (CARP). One of the core capabilities of ISA Server...
measure. The first documented use of anycast routing for topological load-balancing of Internet-connected services was in 1989; the technique was first...
several MX records, typically pointing to an array of mail servers for loadbalancing and redundancy. Resource records are the basic information element of...
eliminate overlap or network address translation. Loadbalancing In client–server applications, loadbalancers forward client requests to a set of server computers...
for loadbalancing among groups of servers. Loadbalancing can be performed on HTTP, HTTPS, VPN, or any TCP/IP traffic using a specific port. Load balancing...
routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls into the group of interior gatewayprotocols (IGPs)...
Lightweight Directory Access Protocol (LDAP /ˈɛldæp/) is an open, vendor-neutral, industry standard application protocol for accessing and maintaining...
also be present multiple times in a single network, for dimensioning, loadbalancing or organizational issues. The user can connect to IMS in various ways...