Emission of electrons induced by an electrostatic field
Field electron emission, also known as field emission (FE) and electron field emission, is emission of electrons induced by an electrostatic field. The most common context is field emission from a solid surface into a vacuum. However, field emission can take place from solid or liquid surfaces, into a vacuum, a fluid (e.g. air), or any non-conducting or weakly conducting dielectric. The field-induced promotion of electrons from the valence to conduction band of semiconductors (the Zener effect) can also be regarded as a form of field emission. The terminology is historical because related phenomena of surface photoeffect, thermionic emission (or Richardson–Dushman effect) and "cold electronic emission", i.e. the emission of electrons in strong static (or quasi-static) electric fields, were discovered and studied independently from the 1880s to 1930s. When field emission is used without qualifiers it typically means "cold emission".
Field emission in pure metals occurs in high electric fields: the gradients are typically higher than 1 gigavolt per metre and strongly dependent upon the work function. While electron sources based on field emission have a number of applications, field emission is most commonly an undesirable primary source of vacuum breakdown and electrical discharge phenomena, which engineers work to prevent. Examples of applications for surface field emission include the construction of bright electron sources for high-resolution electron microscopes or the discharge of induced charges from spacecraft. Devices which eliminate induced charges are termed charge-neutralizers.
Field emission was explained by quantum tunneling of electrons in the late 1920s. This was one of the triumphs of the nascent quantum mechanics. The theory of field emission from bulk metals was proposed by Ralph H. Fowler and Lothar Wolfgang Nordheim.[1]
A family of approximate equations, Fowler–Nordheim equations, is named after them. Strictly, Fowler–Nordheim equations apply only to field emission from bulk metals and (with suitable modification) to other bulk crystalline solids, but they are often used – as a rough approximation – to describe field emission from other materials.
^Fowler, R.H.; Dr. L. Nordheim (1928-05-01). "Electron Emission in Intense Electric Fields" (PDF). Proceedings of the Royal Society A. 119 (781): 173–181. Bibcode:1928RSPSA.119..173F. doi:10.1098/rspa.1928.0091. Retrieved 2009-10-26.
and 25 Related for: Field electron emission information
A fieldemission gun (FEG) is a type of electron gun in which a sharply pointed Müller-type[clarification needed] emitter: 87–128 is held at several kilovolts...
Thermionic emission (also known as thermal electronemission or the Edison effect) is the liberation of electrons from an electrode by virtue of its temperature...
temperature Schottky emission, due to the: Schottky effect or field enhanced thermionic emissionFieldelectronemission, emission of electrons induced by an...
as electron microscopes and particle accelerators. Electron guns may be classified by the type of electric field generation (DC or RF), by emission mechanism...
the thermoelectric effect; thermal electronemission and fieldelectronemission from bulk metals. The free electron model solved many of the inconsistencies...
significantly more electrons from the same surface area. Cold cathodes rely on fieldelectronemission or secondary electronemission from positive ion...
Stimulated emission is the process by which an incoming photon of a specific frequency can interact with an excited atomic electron (or other excited molecular...
erases. EEPROM can be programmed and erased electrically using fieldelectronemission (more commonly known in the industry as "Fowler–Nordheim tunneling")...
conductive by injecting free electrons or ions through either fieldelectronemission or thermionic emission. Thermionic emission occurs when the thermal energy...
effect or field enhanced thermionic emission is a phenomenon in condensed matter physics named after Walter H. Schottky. In electronemission devices,...
fieldemission gun. The gun is connected to a high voltage source (typically ~100–300 kV) and emits electrons either by thermionic or fieldelectron emission...
mechanics to solid-state problems, such as thermionic emission, work function of metals, fieldelectronemission, rectification in metal-semiconductor contacts...
heated by a filament. They may emit electrons by fieldelectronemission, and in gas-filled tubes by secondary emission. Some examples are electrodes in...
begin to emit electrons either through heating (thermionic emission) or in an electric field that is sufficient to cause fieldelectronemission. Once initiated...
electronemission from the sample induced by photon absorption (photoemission), by high temperature (thermionic emission), due to an electric field (field...
limited cases. In fieldelectronemission, electrons tunnel through a potential barrier, rather than escaping over it as in thermionic emission or photoemission...
of fieldelectronemission as a separate physical effect. (He called it "auto-electronic emission", and was interested in it as a possible electron source...
also used for sintering of carbon nanotubes for development of fieldelectronemission electrodes. Functioning of SPS systems is schematically explained...
amplification of the secondary electron signal.[citation needed] Low-voltage SEM is typically conducted in an instrument with a fieldemission guns (FEG) which is...
cathode may be considered "cold" if it emits more electrons than can be supplied by thermionic emission alone. It is used in gas-discharge lamps, such as...
R.; Yi, I. (1996). "Harmony in Electrons: Cyclotron and Synchrotron Emission by Thermal Electrons in a Magnetic Field". The Astrophysical Journal. 465:...
Global Information