Combustion and Flame information

Combustion and Flame is a monthly peer-reviewed scientific journal published by Elsevier on behalf of the Combustion Institute. It covers fundamental research...

consistent flame. The high temperature of the flame causes the vaporized fuel molecules to decompose, forming various incomplete combustion products and free...

Combustion does not always result in fire, because a flame is only visible when substances undergoing combustion vaporize, but when it does, a flame is...

knock – the undesirable, erratic, and noisy combustion of low-octane fuels in internal combustion engines. Cool flames were accidentally discovered in the...

spontaneous human combustion: "If SHC is a real phenomenon (and not the result of an elderly or infirm person being too close to a flame source), why doesn't...

The flame speed is the measured rate of expansion of the flame front in a combustion reaction. Whereas flame velocity is generally used for a fuel, a related...

In the study of combustion, the adiabatic flame temperature is the temperature reached by a flame under ideal conditions. It is an upper bound of the...

of combustion, releasing heat, light, and various reaction products. At a certain point in the combustion reaction, called the ignition point, flames are...

In combustion, a diffusion flame is a flame in which the oxidizer and fuel are separated before burning. Contrary to its name, a diffusion flame involves...

Combustion instabilities are physical phenomena occurring in a reacting flow (e.g., a flame) in which some perturbations, even very small ones, grow and...

increases which plays a vital role in stabilizing the flame. Wikimedia Commons has media related to Combustion chambers. Cylinder head Engine displacement Combustor...

based approach to modeling real fuel combustion chemistry III Reaction kinetic model of JP10". Combustion and Flame. 198: 466–476. Bibcode:2018CoFl..198...

premixed flame is a flame formed under certain conditions during the combustion of a premixed charge (also called pre-mixture) of fuel and oxidiser....

the ambient air or supplied oxygen, and allowing for ignition and combustion. The flame is generally used for the heat, infrared radiation, or visible...

the flame front ignited by the spark plug, but when one or more pockets of air/fuel mixture explode outside the envelope of the normal combustion front...

Heterogeneous combustion, otherwise known as combustion in porous media, is a type of combustion in which a solid and gas phase interact to promote the...

shown that the RDE has potential in transport and other applications. In detonative combustion, the flame front expands at supersonic speed. It is theoretically...

A flame holder is a component of a jet engine designed to help maintain continual combustion. In a scramjet engine the residence time of the fuel is very...

Cetane number (cetane rating) (CN) is an indicator of the combustion speed of diesel fuel and compression needed for ignition. It plays a similar role...

resulting from the incomplete combustion of hydrocarbons. It is more properly restricted to the product of the gas-phase combustion process[citation needed]...

the combustion chambers. Different colors were probably not achieved in Kastner's time, but would be possible with the addition of salts to the flames. Pulsation...

soot, PAH and other large molecules, diagnostics, laminar flames, turbulent flames, heterogenous combustion, spray and droplet combustion, detonations...

fuel and oxygen are found to be mixed in stoichiometric proportion. This surface is special in combustion because this is where a diffusion flame resides...

compared to H· or OH·, and therefore has much lower potential to propagate the radical oxidation reactions of combustion. Flame retardant cotton is cotton...