Transverse leaf spring front suspension information
This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations.(July 2015) (Learn how and when to remove this message)
1919 Ford Model T
Transverse leaf spring front suspension is a type of automotive front suspension, whose usage is most well known in Ford Motor Company products from 1908 to 1948 (1959 for the inexpensive Ford Popular in the UK). "Suicide front axle" is a term that has been used for it.[1]
The configuration consists of a one-piece axle (solid front axle), to the ends of which the steerable front wheels are mounted. The axle receives its vertical and transverse support from a transverse leaf spring (leaf springs were often used for support in more than one direction), and its longitudinal support from fore-aft links sometimes called "radius rods" which are attached (via pivots) to the ends of the axle at their forward end and to the sides of the chassis (again via pivots) at their aft end. The ends of the transverse leaf spring can either tie to the top of the rods, or to the top of the solid axle. The transverse leaf spring is attached at its center to the center of the chassis's front cross member.
^"AutoZone.com Glossary". Retrieved 2009-11-27.
and 27 Related for: Transverse leaf spring front suspension information
the spring only acts as a spring member. The AC Cobra is an example of a transverse, multi-leaf steel springsuspension that uses the leafspring as the...
Transverseleafspringfrontsuspension is a type of automotive frontsuspension, whose usage is most well known in Ford Motor Company products from 1908...
numerous examples of transverseleafsprings exist as well. Leafsprings can serve multiple suspension functions: location, springing, and to some extent...
A Corvette leafspring is a type of independent suspension that utilizes a fiber-reinforced plastic (FRP) mono-leafspring instead of more conventional...
torsion bar suspension, also known as a torsion springsuspension, is any vehicle suspension that uses a torsion bar as its main weight-bearing spring. One end...
speed of 160 km/h. It also featured a box chassis frame, transverseleafspringfrontsuspension and a conventional Ford rear axle. A total of twenty Buckles...
link suspension) or a combination of lower trailing links and an upper transverse wishbone. None of these additional links are required if leafsprings are...
the 1963 Jeep Wagoneer's front axle, upon its market introduction. Swing axle suspensions conventionally used leafsprings and shock absorbers, though...
bush in a transverse axle fixed to the front of the chassis. The top of the pillar was fixed and pivoted on a transverse semi-elliptic leafspring. This system...
similar design, albeit with less sophisticated leafsprings, but the Cottin-Desgouttes frontsuspension was in turn inspired by a 1904 design by American...
the rear wheels had independent suspension, and the front wheels were mounted on a Transverseleafspringfrontsuspension with a solid axle. The Museum...
of the car's front end to accommodate rack and pinion steering while still using transverseleafspringsuspension (with the leafspring doubling as the...
65mph. The suspension, which was carried over from the 329, consisted of an independent frontsuspension with a high-mounted transverseleafspring acting...
that had been acquired by Standard-Triumph in 1959. Rear suspension was by a single transverse-leaf swing axle, an arrangement, that unless ameliorated by...
longer and coil springs in place of a transverseleafspring at the front: ladder-frame chassis independent coil springsuspensionfront and rear. Unlike...
A-arms and a lower transverseleafspring — aside from the Opel's styling, the unusual use of a transverseleaf-spring in the suspension was another remarkable...
used and most rat rods use a 1928-1948 Ford I-beam axle, with a transverseleafspring. Although any rear axle can be used in a rat rod, the Ford rear...
steer. Most suspension parts are made of aluminium. The rear suspension is an integral link design, with a transverse composite leafspring. Polestar 1...
transversely installed, fiberglass mono-leafspring combined with struts in the rear. The "generation 1.5" W-body models had updated rear suspensions...
torque tube allowed a cantilever springsuspension, which gives a softer ride than a center-mount axle on the leafspring, as required by the Hotchkiss setup...
the car's swing axle rear suspension occurred with the addition of a transverseleafspring along with softer rear coil springs designed to diminish rear...
V8 to power every Ford car and truck. The transverseleafspringsuspension remained, but the frontspring was relocated ahead of the axle to allow more...
helical springs were used for the frontsuspension, instead of the transverseleaf-springs. The rear saw the replacement of a lower leaf-spring to an upper...
Michelin ZX radial tyres, front disc brakes, independent rear suspension with a transverseleafspring, and a strut-type frontsuspension with integral anti-roll...
and leather-covered bucket seats. The suspension is independent at the front and rear using transverseleafsprings. The AC Aceca featured in the UK "Car...