In telecommunication, the term transmission block has the following meanings:
A group of characters or bits transmitted as a block, unit, message, or packet. It usually includes additional encoded characters for error detection and correction.
In data transmission, a group of records sent, processed, or recorded as a unit.
Some protocols require each transmission block to end with an end-of-message marker. This is often a control character such as End-of-Text (ETX), End-of-Transmission-Block (ETB), or End-of-Transmission (EOT).
Some protocols (especially those requiring ETX) require each transmission block to begin with a Start-of-Text character (STX).
and 22 Related for: Transmission block information
telecommunication, the term transmissionblock has the following meanings: A group of characters or bits transmitted as a block, unit, message, or packet...
Look up Block, Blocks, block, blocked, or blocks in Wiktionary, the free dictionary. Block or blocked may refer to: Block programming, the result of a...
In telecommunications, a block check character (BCC) is a character added to a transmissionblock to facilitate error detection. In longitudinal redundancy...
transmission is the process of sending or propagating an analog or digital signal via a medium that is wired, wireless, or fiber-optic. Transmission system...
of a parallel group of bit streams. The data must be divided into transmissionblocks, to which the additional check data is added. The term usually applies...
text) or ETB (end transmissionblock). Normal data frames do not allow certain characters to appear in the data. These are the block ending characters:...
A manual transmission (MT), also known as manual gearbox, standard transmission (in Canada, the United Kingdom, and the United States), or stick shift...
power output mated to a 4L85E transmission) GMC Savana full-size (reduced power output mated to a 4L85E transmission) Block / Head: Cast gray iron / Cast...
NAK (Negative Acknowledge), SYN (Synchronous Idle), and ETB (End of TransmissionBlock). It also defines a serial data format, consisting of a start bit...
A transmission gate (TG) is an analog gate similar to a relay that can conduct in both directions or block by a control signal with almost any voltage...
The Transmission Control Protocol (TCP) is one of the main protocols of the Internet protocol suite. It originated in the initial network implementation...
integrated with part of the transmission. Many farm tractor designs integrate the cylinder block, crankcase, transmission, and rear axle into a single...
1963 edition of ASCII classified DLE as a device control, rather than a transmission control, and gave it the abbreviation DC0 ("device control reserved for...
end of transmissionblock character (ETB) was used to indicate the end of a block of data, where data was divided into such blocks for transmission purposes...
A block error is a common type of error in certain types of digital television transmission, particularly those that use image compression. Its presence...
List of automatic, dual clutch automatic, and manual transmissions and transaxles used in vehicles manufactured by Ford Motor Company. 1950–1965 Ford-O-Matic...
less reliable for data transmission, as an error in transmitting the shift code typically makes a long part of the transmission unreadable. The standards...
data or transparently within a long transmissionblock. A certain number of idles were sent prior to each transmission. The IBM Binary Synchronous protocol...
facility. The effective transmission rate is calculated as (a) the measured number of units of data, such as bits, characters, blocks, or frames, transmitted...
name for the ZF Friedrichshafen nine-speed automatic transmission models (9-speed transmission with Hydraulic converter and Planetary gearsets) for transverse...
A ganglionic blocker (or ganglioplegic) is a type of medication that inhibits transmission between preganglionic and postganglionic neurons in the autonomic...
codes should be applied to the ciphertext before transmission. Many more modes of operation for block ciphers have been suggested. Some have been accepted...