ISO 1745:1975 Information processing – Basic mode control procedures for data communication systems is an early ISO standard defining a Telex-oriented communications protocol that used the non-printable ASCII transmission control characters SOH (Start of Heading), STX (Start of Text), ETX (End of Text), EOT (End of Transmission), ENQ (Enquiry), ACK (Acknowledge), DLE (Data Link Escape), NAK (Negative Acknowledge), SYN (Synchronous Idle), and ETB (End of Transmission Block).
It also defines a serial data format, consisting of a start bit, 7 bit ASCII (least significant bit first), a parity bit (even for asynchronous networks, odd for synchronous networks), and a stop bit.
The text of ISO 1745:1975 is not currently freely available,[1] but the corresponding ECMA version is.[2] The protocol it defines seems to now be little used.[citation needed]
^"ISO 1745: Scope and field of application".
^"Basic Mode Control Procedures for Data Communication Systems using the ECMA 7-Bit Code, 2nd Edition" (PDF). 1973.
ISO1745:1975 Information processing – Basic mode control procedures for data communication systems is an early ISO standard defining a Telex-oriented...
ISO 2015 is a standard of the International Organization for Standardization (ISO), superseded by ISO standard ISO 8601. The standard ISO week numbering...
ISO 4217 is a standard published by the International Organization for Standardization (ISO) that defines alpha codes and numeric codes for the representation...
ISO 7027:1999 is an ISO standard for water quality that enables the determination of turbidity. The ISO 7027 technique is used to determine the concentration...
parts: ISO 6344-1:1998: Grain size distribution test ISO 6344-2:1998: Determination of grain size distribution of macrogrits P12 to P220 ISO 6344-3:1998:...
ISO 2711 is an ISO standard describing formats for ordinal dates. The ISO is an international standard-setting body composed of representatives from various...
ISO 10161 is the ISO standard, first published in 1993, that defines the interlibrary loan (ILL) application protocol for communication between various...
ISO 5964 was the ISO standard for the establishment and development of multilingual thesauri. Its full title was Guidelines for the establishment and development...
ISO 10160 is the ISO standard, first published in 1993, that defines the terminology that is used for interlibrary loan transactions between various document...
tests. ISO 16750 has five parts: ISO 16750-1: General ISO 16750-2: Electrical loads ISO 16750-3: Mechanical loads ISO 16750-4: Climatic loads ISO 16750-5:...
ISO 3307 is an international standard for date and time representations issued by the International Organization for Standardization (ISO). The standard...
The ISO 9000 family is a set of five quality management systems (QMS) standards by the International Organization for Standardization (ISO) that help organizations...
notation: ISO 2014, ISO 2015, ISO 2711, ISO 3307, and ISO 4031. It has been superseded by a second edition ISO 8601:2000 in 2000, by a third edition ISO 8601:2004...
technical standard defined by ISO which describes title block formats to be used in technical drawings. ISO 7200:1984 ISO 7200:2004 ISO 128 for the general principles...
and IEST petitioned to ISO for new standards, the first document of ISO 14644 was published in 1999, ISO 14644-1. In 2000, ISO 14644-2 was published,...
1992) is the ISO standard describing the International System of Units (SI). The ISO 1000:1992 standard was withdrawn in 2009 together with ISO 31, and are...
ISO 14000 is a family of standards by the International Organization for Standardization (ISO) related to environmental management that exists to help...
The International Organization for Standardization (ISO /ˈaɪsoʊ/) is an independent, non-governmental, international standard development organization...
ISO 704 - Terminology work—Principles and methods It is an ISO standard, which establishes the basic principles and methods for preparing and compiling...
ISO 14698 Standards features two International Standards on biocontamination control for cleanrooms. IEST, the Secretariat and Administrator of ISO Technical...
an ISO standard covering petroleum products, developed by ISO's Technical Committee (TC) 28: Petroleum products and lubricants. According to ISO's abstract...
ISO 4031 is a superseded international standard first issued in 1978 by the International Organization for Standardization. It defined the representation...
ISO 22000 is a food safety management system by the International Organization for Standardization (ISO) which is outcome focused, providing requirements...
The international standard ISO 233 establishes a system for romanization of Arabic script. It was supplemented by ISO 233-2 in 1993 which is specific for...
ISO 8583 is an international standard for financial transaction card originated interchange messaging. It is the International Organization for Standardization...
angles. ISO 657-2:1989 ISO 657-5:1976 ISO 657-11:1980 ISO 657-14:2000 Revisions ISO/DIS 12633-2 ISO 657-14:1982 ISO 657-15:1980 ISO 657-16:1980 ISO 657-18:1980...
4999 ISO 5000 – ISO 7999 ISO 8000 – ISO 9999 ISO 10000 – ISO 11999 ISO 12000 – ISO 13999 ISO 14000 – ISO 15999 ISO 16000 – ISO 17999 ISO 18000 – ISO 19999...
ISO 45001 is an International Organization for Standardization (ISO) standard for management systems of occupational health and safety (OHS), published...
Global Information