This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Tool bit" – news · newspapers · books · scholar · JSTOR(November 2009) (Learn how and when to remove this message)
In machining, a tool bit is a non-rotary cutting tool used in metal lathes, shapers, and planers. Such cutters are also often referred to by the set-phrase name of single-point cutting tool, as distinguished from other cutting tools such as a saw or water jet cutter. The cutting edge is ground to suit a particular machining operation and may be resharpened or reshaped as needed. The ground tool bit is held rigidly by a tool holder while it is cutting.
Various tool bits, carbide inserts and holdersShearing action depicted
In machining, a toolbit is a non-rotary cutting tool used in metal lathes, shapers, and planers. Such cutters are also often referred to by the set-phrase...
A drill bit is a cutting tool used in a drill to remove material to create holes, almost always of circular cross-section. Drill bits come in many sizes...
original on 2017-03-27. Look up bit in Wiktionary, the free dictionary. Bit Calculator – a tool providing conversions between bit, byte, kilobit, kilobyte,...
A Tool and Cutter Grinder is used to sharpen milling cutters and toolbits along with a host of other cutting tools. It is an extremely versatile machine...
The shank is the end of a drill bit grasped by the chuck of a drill. The cutting edges of the drill bit contact the workpiece, and are connected via the...
machining, tool wear is the gradual failure of cutting tools due to regular operation. Tools affected include tipped tools, toolbits, and drill bits that are...
x64 edition, the 32-bit version of DirectX Diagnostic Tool is run by default. "DirectX: Description of the DirectX Diagnostic Tool". Microsoft. 2007-05-07...
Tool making typically means making tooling used to produce products. Common tooling includes metal forming rolls, cutting tools (such as toolbits and...
machine tools remove material from a rotating workpiece via the (typically linear) movements of various cutting tools, such as toolbits and drill bits. The...
simple tools, only human beings, whose use of stone tools dates back hundreds of millennia, have been observed using tools to make other tools. Early...
tool used in industrial milling applications. It is distinguished from the drill bit in its application, geometry, and manufacture. While a drill bit...
Turning is a machining process in which a cutting tool, typically a non-rotary toolbit, describes a helix toolpath by moving more or less linearly while...
virtual mixer. 16-bit, 24-bit, and 32-bit float audio bit depths at sample rates up to 192 kHz are supported. Pro Tools supports mixed bit depths and audio...
Cutting tool materials are materials that are used to make cutting tools which are used in machining (drill bits, toolbits, milling cutters, etc.) but...
checking the angles when grinding the profiles of single-point screw-cutting toolbits and centers. In the image, the gauge on the left is called a fishtail...
holds one toolbit. It is usually a standard left-hand turning tool that is held at an angle of 30 to 60 degrees. Fly cutters with two toolbits have no...
Hughes Tool Company was an American manufacturer of drill bits. Founded in 1908, it was merged into Baker Hughes Incorporated in 1987. The company was...
A drill is a tool used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver chuck. Hand-operated types are dramatically...
boron nitride. Tools that are commonly tipped include milling cutters (such as end mills, face mills, and fly cutters), toolbits, router bits, and saw blades...
standard 1⁄4-inch hex shank power toolbits. Since a wide variety of drill bits are available in this format, the tool can do double duty as a "push drill"...
Global Information
