This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Steam tank" – news · newspapers · books · scholar · JSTOR(January 2021) (Learn how and when to remove this message)
Weapon
US Army Corps of Engineers Steam tank
The US Army Corps of Engineers Steam tank
Place of origin
United States
Specifications
Mass
50.8 t
Length
10.6 m (34 ft 9 in)
Width
3.8 m (12 ft 6 in)
Height
3.2 m (10 ft 6 in)
Crew
8
Armor
13 mm (0.51 in)
Main armament
flamethrower
Secondary armament
four .30 cal. (7.62 mm) machine guns
Engine
2 steam piston engines 500 hp (373 kW) combined
Power/weight
9.8 hp/tonne
Suspension
unsprung
Operational range
?
Maximum speed
6 km/h (3.7 mph)
The Steam tank (tracked) was an early U.S. tank design of 1918 imitating the design of the British Mark IV tank but powered by steam.[1]
The type was designed by an officer from the U.S. Army's Corps Of Engineers. The project was started by General John A. Johnson with the help of the Endicott and Johnson Shoe Company and financed by the Boston bankers Phelan and Ratchesky, costing $60,000 (US$ 1,215,400 in 2024). Expertise was called in from Stanley Motor Carriage Company in Watertown, Massachusetts, that produced steam cars. The engines and boilers of two Unit Railway Cars were built in. Earlier fighting vehicles projects had employed steam power because petrol engines were not yet powerful enough; the Steam tank however used it for the main reason that it was meant to be a specialized flame tank to attack pillboxes and the original design had this weapon driven by steam. When the main device to build up sufficient pressure became a 35 hp (26 kW) auxiliary gasoline engine, the two main 2-cylinder steam engines with a combined power of 500 hp (370 kW) remained, each engine driving one track to give a maximum speed of 4 mph (6 km/h). The transmission allowed two speeds forward and two in reverse. The steam engines used kerosene for fuel.
The flamethrower, located in the front cabin, had a range of 90 feet (27 m); additionally there were four .30 cal. (7.62 mm) machine guns; two in a sponson at each side. The length of the vehicle was 34 feet 9 inches (10.6 m), the width 12 feet 6 inches (3.8 m) and the height 10 feet 4.5 inches (3.16 m). The tracks were 24 inches (61 cm) wide. Each track frame carried mud clearing spikes, sometimes mistaken for battering rams. The tank had a weight of about 50 short tons (45 t). There was to have been a crew of eight, on the assumption there were a commander, a driver, an operator of the flame thrower, a mechanic and four machine gunners.
Only one was completed in Boston and demonstrated in April 1918, in several parades also, on one occasion breaking down in front of the public. The prototype was in June shipped to France to be tested — with much publicity to bolster allied morale — and was named America. The flame thrower nozzle was moved to a rotating turret on the roof of the cabin.
There was a contemporary steam-powered armored vehicle - the Steam Wheel Tank - which was not tracked but an armored three-wheeled vehicle, hence the designation "(Tracked)" or "(Track-laying)". The design combined serious cooling problems with a dangerous vulnerability due to its two steam boilers and large fuel reservoirs needed to heat the two main engines, and feed both the auxiliary engine and the flame thrower.
The Steamtank (tracked) was an early U.S. tank design of 1918 imitating the design of the British Mark IV tank but powered by steam. The type was designed...
A tank locomotive or tank engine is a steam locomotive which carries its water in one or more on-board water tanks, instead of a more traditional tender...
The Steam Wheel Tank was a U.S.-produced, prototype armoured fighting vehicle built by the Holt Manufacturing Company (now Caterpillar Inc.). Developed...
A tank is an armoured fighting vehicle intended as a primary offensive weapon in front-line ground combat. Tank designs are a balance of heavy firepower...
choice resembles a Mark IV tank. Mark V tank Steamtank: an unsuccessful US design based on the Mark IV, but steam-powered and armed with a flamethrower. A...
The Doble steam car was an American steam car maker from 1909 to 1931. Its latter models of steam car, with fast-firing boiler and electric start, were...
World War I, although none were used in combat. Some examples include the SteamTank and General Jackson's Pedrail prototype. The successes of the Soviet defense...
The Tsar Tank (Russian: Царь-танк, transcription: Tsar'-tank), also known as the Netopyr' (Russian: Нетопырь, which stands for Pipistrellus, a genus of...
A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam.: 80 It is fuelled by...
A main battle tank (MBT), also known as a battle tank or universal tank, is a tank that fills the role of armour-protected direct fire and maneuver in...
known as bunkers, are containers for the storage of fuel on steam-powered boats or steamtank engines, or rooms for the storage of fuel in furnaces. The...
vaporization. Fireless steam locomotives were steam locomotives that operated from a supply of steam stored on board in a large tank resembling a conventional...
The British Mark V tank was an upgraded version of the Mark IV tank. The tank was improved in several aspects over the Mark IV, chiefly the new steering...
A medium tank is a classification of tanks, particularly prevalent during World War II, which represented a compromise between the mobility oriented light...
in tank design, the first American tanks to see service were copies of French light tanks and a joint heavy tank design with the United Kingdom. In the...
to manufacturing Traction engines and steam lorries, but incorporated a small trademark outline image of a tank on the front smokebox door of their postwar...
The cruiser tank (sometimes called cavalry tank or fast tank) was a British tank concept of the interwar period for tanks designed as modernised armoured...
The M1917 was the United States' first mass-produced tank, entering production shortly before the end of World War I. It was a license-built near-copy...
Heavy tank is a term used to define a class of tanks produced from World War I to the end of the Cold War. These tanks generally sacrificed mobility and...
1888 0-4-4T steamtank locomotives class Pennsylvania Railroad class T1, a 1942 4-4-4-4 steam locomotive class Reading T-1, a 1945 4-8-4 steam locomotive...
The "Female" tank was a variation of the British heavy tank deployed during the First World War. It carried multiple machine guns instead of the mix of...
Tank classification is a taxonomy of identifying either the intended role or weight class of tanks. The classification by role was used primarily during...
A light tank is a tank variant initially designed for rapid movements in and out of combat, to outmaneuver heavier tanks. It is smaller in size with thinner...
Y-chromosomal haplogroup LB&SCR I2 class, a 1907 British class of 4-4-2 steamtank locomotive Grigorovich I-2, a biplane fighter aircraft of the Soviet Union...
This article deals with the history and development of tanks of the Soviet Union and its successor state, the Russian Federation; from their first use...
0-6-4T steamtank locomotives Highland Railway L Class, 4-4-0 steam locomotives Maine Central class L 4-4-0, steam locomotives NBR Class L, 4-4-2T steam locomotives...
class (1873), a class of steamtank locomotives operated by the New Zealand Railways Department NZR A class (1906), a class of steam tender locomotives operated...