Standard Commands for Programmable Instruments information
Communications protocol for test equipment
"SCPI" redirects here. For other uses, see SCPI (disambiguation).
Rear-panel of Tektronix TDS210 digital oscilloscope showing RS-232 (DE9) and IEEE-488 connectors that accept remote SCPI commands.[1]Rear-panel of Rigol DS1074Z digital oscilloscope showing USB-B and Ethernet (RJ45) connectors that accept remote SCPI commands.[2]
The Standard Commands for Programmable Instruments (SCPI; often pronounced "skippy") defines a standard for syntax and commands to use in controlling programmable test and measurement devices, such as automatic test equipment and electronic test equipment.[3]
^Tektronix TDS2010 Digital Oscilloscope Programmer Manual; 2020; 291 pages.
channel to T&M instruments. Furthermore, the instrument drivers encapsulate the StandardCommandsforProgrammableInstruments (SCPI) commands, which are...
standards body. The current standard, "VISA Specification 5.0", is maintained by the IVI Foundation. StandardCommandsforProgrammableInstruments (SCPI)...
management tool for X11 Common name for Pseudocaranx georgianus, a fish found in Australia StandardCommandsforProgrammableInstruments, often pronounced...
original standard by defining precisely how controllers and instruments communicate. StandardCommandsforProgrammableInstruments (SCPI) took the command structures...
however, programmable calculators usually featured a one-line numeric or alphanumeric display. The Big Four manufacturers of programmable calculators...
Another form of one-time programmable memory device uses the same semiconductor chip as an ultraviolet-erasable programmable read-only memory (UV-EPROM)...
includes the Standard Commands for Programmable Instrumentation (SCPI), which define specific commands that each instrument class must obey. SCPI ensures compatibility...
anticipate programmableinstruments and provide useful functionality that enhances scripting's capabilities on LXI-compliant instruments. The VXI bus...
MIDI (/ˈmɪdi/; Musical Instrument Digital Interface) is a technical standard that describes a communication protocol, digital interface, and electrical...
Foundation defines a standard driver application programming interface (API) forprogrammableinstruments. IVI driver formats can be IVI-COM for working with...
The HP 9800 is a family of what were initially called programmable calculators and later desktop computers that were made by Hewlett-Packard, replacing...
Instrumentation is a collective term for measuring instruments, used for indicating, measuring, and recording physical quantities. It is also a field...
branch was sometimes used to distinguish a programmable calculator from a computer. The first Soviet programmable desktop calculator ISKRA 123, powered by...
MIDI commands and bytes sequences, thus defining instrument tones, controllers for sound effects, etc. In addition to the simpler General MIDI standard, GS...
Instead, Emacs assigns meanings to named commands, and then gives keys their meanings by binding them to commands. "Text System Defaults and Key Bindings"...
EEPROM or E2PROM (electrically erasable programmable read-only memory) is a type of non-volatile memory. It is used in computers, usually integrated in...
supervisory control and data acquisition (SCADA) systems, or DCSs, and programmable logic controllers (PLCs), though SCADA and PLC systems are scalable down...
Dual read commands the send and address from the main in single mode, and return the data in dual mode. Dual I/O commands send the command in single mode...
Complex Data Standardsfor specifying the communication of complex data types such as binary data and XML documents OPC CommandsStandardsfor communicating...