SINCGARS information

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "SINCGARS" – news · newspapers · books · scholar · JSTOR (February 2008) (Learn how and when to remove this message) This article contains content that is written like an advertisement. Please help improve it by removing promotional content and inappropriate external links, and by adding encyclopedic content written from a neutral point of view. (February 2013) (Learn how and when to remove this message) This article may rely excessively on sources too closely associated with the subject, potentially preventing the article from being verifiable and neutral. Please help improve it by replacing them with more appropriate citations to reliable, independent, third-party sources. (October 2015) (Learn how and when to remove this message) (Learn how and when to remove this message)

Single Channel Ground and Airborne Radio System (SINCGARS) is a very high frequency combat-net radio (CNR) used by U.S. and allied military forces. In the CNR network, the SINCGARS’ primary role is voice transmission between surface and airborne command and control assets.

The SINCGARS family replaced the Vietnam War-era synthesized single frequency radios (AN/PRC-77 and AN/VRC-12), although it can work with them. The airborne AN/ARC-201 radio is phasing out^[when?] the older tactical air-to-ground radios (AN/ARC-114 and AN/ARC-131).

The SINCGARS is designed on a modular basis to achieve maximum commonality among various ground, maritime, and airborne configurations. A common receiver transmitter (RT) is used in the ground configurations. The modular design also reduces the burden on the logistics system to provide repair parts.

The SINCGARS can operate in either the single channel or frequency hop (FH) mode, and stores both single channel frequencies and FH load sets. The system is compatible with all current U.S. and allied VHF-FM radios in the single channel, non-secure mode. The SINCGARS operates on any of 2320 channels between 30 and 88 megahertz (MHz) with a channel separation of 25 kilohertz (kHz). It accepts either digital or analog inputs and superimposes the signal onto a radio frequency (RF) carrier wave. In FH mode, the input changes frequency about 100 times per second over portions of the tactical VHF-FM range. These continual changes in frequency hinder threat intercept and jamming units from locating or disrupting friendly communications. The SINCGARS provides data rates up to 16,000 bits per second. Enhanced data modes provide packet and RS-232 data. The enhanced data modes available with the System Improvement Program (SIP) and Advanced System Improvement Program (ASIP) radios also enable forward error correction (FEC), and increased speed, range, and accuracy of data transmissions.

Most ground SINCGARS radios have the ability to control output power; however, most airborne SINCGARS radio sets are fixed power. Those RTs with power settings can vary transmission range from approximately 200 meters (660 feet) to 10 kilometers (km) (6.2 miles). Adding a power amplifier increases the line of sight (LOS) range to approximately 40 km (25 miles). (These ranges are for planning purposes only; terrain, weather, and antenna height have an effect on transmission range.) The variable output power level allows users to operate on the minimum power necessary to maintain reliable communications, thus lessening the electromagnetic signature given off by their radio sets. This ability is of particular importance at major command posts, which operate in multiple networks. SC CNR users outside the FH network can use a hailing method to request access to the network. When hailing a network, a user outside the network contacts the network control station (NCS) on the cue frequency. In the active FH mode, the SINCGARS radio gives audible and visual signals to the operator that an external subscriber wants to communicate with the FH network. The SINCGARS operator must change to the cue frequency to communicate with the outside radio system. The network can be set to a manual frequency for initial network activation. The manual frequency provides a common frequency for all members of the network to verify that the equipment is operational. During initial net activation, all operators in the net tune to the manual frequency. After communications are established, the net switches to the FH mode and the NCS transfers the hopping variables to the out stations.

More than 570,000 radios have been purchased.^[1] There have been several system improvement programs, including the Integrated Communications Security (ICOM) models, which have provided integrated voice and data encryption, the Special Improvement Program (SIP) models, which add additional data modes, and the advanced SIP (ASIP) models, which are less than half the size and weight of ICOM and SIP models and provided enhanced FEC (forward error correction) data modes, RS-232 asynchronous data, packet data formats, and direct interfacing to Precision Lightweight GPS Receiver (PLGR) devices providing radio level situational awareness capability.

In 1992, the U.S. Air Force awarded a contract to replace the AN/ARC-188 for communications between Air Force aircraft and Army units.