Pro Electron or EECA is the European type designation and registration system for active components (such as semiconductors, liquid crystal displays, sensor devices, electronic tubes and cathode ray tubes).
Pro Electron was set up in 1966 in Brussels, Belgium. In 1983 it was merged with the European Electronic Component Manufacturers Association (EECA) and since then operates as an agency of the EECA.
The goal of Pro Electron is to allow unambiguous identification of electronic parts, even when made by several different manufacturers. To this end, manufacturers register new devices with the agency and receive new type designators for them.
ProElectron or EECA is the European type designation and registration system for active components (such as semiconductors, liquid crystal displays, sensor...
the European ProElectron standard: The standardized 1N-series numbering EIA370 system was introduced in the US by EIA/JEDEC (Joint Electron Device Engineering...
pinout of the BC108 more exactly. The BC548 part number is assigned by ProElectron, which allows many manufacturers to offer electrically and physically...
did not gain acceptance in the semiconductor industry. The European ProElectron semiconductor numbering system originated in a similar way from the older...
Manufacturers Association (EECA) uses a numbering scheme that was inherited from ProElectron when it merged with EECA in 1983. This scheme begins with two letters:...
and are registered with trade industry associations such as JEDEC and ProElectron. Other types are proprietary designations that may be made by only one...
Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen...
section of an ECL86 does happen to be similar to those of an ECC83. ProElectron maintained a subset of the M-P system after their establishment in 1966...
Cryogenic electron microscopy (cryo-EM) is a cryomicroscopy technique applied on samples cooled to cryogenic temperatures. For biological specimens, the...
Builder's plate Manufacturer model number Global Trade Item Number (GTIN) ProElectron (European designation and registration system for electronic parts) RETMA...
change. Oxidation is the loss of electrons or an increase in the oxidation state, while reduction is the gain of electrons or a decrease in the oxidation...
a supplier as simply "C1815", thus possibly creating confusion with ProElectron abbreviated markings, because a transistor marked "D965" might either...
example, there are three standards: JEDEC JESD370B in the United States, ProElectron in Europe, and Japanese Industrial Standards (JIS). Semiconductor device...
defined by national or international industry associations such as JEDEC, ProElectron, or EIAJ, or may be proprietary to a single manufacturer. Assorted discrete...
The Teignmouth Electron was a 41-foot trimaran sailing vessel designed explicitly for Donald Crowhurst’s ill-fated attempt to sail around the world in...
of Electron Tubes. IOS Press. p. 27. ISBN 978-9051991451. 2C43 data sheet "Pacific T.V. - Vacuum Tube Sockets". "Philips Data Handbook: Electron Tubes...
licensed from Western manufacturers were often named according to the ProElectron standard. Microelectronica assigned integrated circuit designations according...
catalyze the transfer of electrons across the thylakoid membrane from plastocyanin to ferredoxin. Ultimately, the electrons that are transferred by Photosystem...
particles (electrons and positrons) for particle physics. The design of a linac depends on the type of particle that is being accelerated: electrons, protons...
Global Information