Power cycling, the act of turning a piece of equipment off and then on again
Thermodynamic power cycle, a linked sequence of thermodynamic processes that forms the basis of an engine
Duty cycle, the fraction of a period of time in which a signal or system is active
Topics referred to by the same term
This disambiguation page lists articles associated with the title Power cycle. If an internal link led you here, you may wish to change the link to point directly to the intended article.
The Allam Cycle or Allam-Fetvedt Cycle is a process for converting carbonaceous fuels into thermal energy, while capturing the generated carbon dioxide and...
A combined cyclepower plant is an assembly of heat engines that work in tandem from the same source of heat, converting it into mechanical energy. On...
Powercycling is the act of turning a piece of equipment, usually a computer, off and then on again. Reasons for powercycling include having an electronic...
in larger systems. The Rankine cycle closely describes the process by which steam engines commonly found in thermal power generation plants harness the...
device. Two primary classes of thermodynamic cycles are powercycles and heat pump cycles. Powercycles are cycles which convert some heat input into a mechanical...
binary cycle is a method for generating electrical power from geothermal resources and employs two separate fluid cycles, hence binary cycle. The primary...
A duty cycle or powercycle is the fraction of one period in which a signal or system is active. Duty cycle is commonly expressed as a percentage or a...
in the Atkinson cycle as a part-time operating regimen, giving good economy while running in Atkinson cycle, and conventional power density when running...
The Brayton cycle, also known as the Joule cycle, is a thermodynamic cycle that describes the operation of certain heat engines that have air or some other...
The staged combustion cycle (sometimes known as topping cycle, preburner cycle, or closed cycle) is a powercycle of a bipropellant rocket engine. In...
The Kalina cycle, developed by Alexander Kalina, is a thermodynamic process for converting thermal energy into usable mechanical power. It uses a solution...
A cyclingpower meter is a device on a bicycle that measures the power output of the rider. Most cyclingpower meters use strain gauges to measure torque...
The expander cycle is a powercycle of a bipropellant rocket engine. In this cycle, the fuel is used to cool the engine's combustion chamber, picking...
that claims to operate an Atkinson cycle at low load (thus the lower power density is not a handicap) and a Miller cycle when under light boost. A traditional...
combined cycle hydrogen power plant is a power plant that uses hydrogen in a combined cyclepower plant. A green hydrogen combined cyclepower plant is...
Cogeneration is also common with geothermal power plants as they often produce relatively low grade heat. Binary cycles may be necessary to reach acceptable...
engineering, the organic Rankine cycle (ORC) is a type of thermodynamic cycle. It is a variation of the Rankine cycle named for its use of an organic,...
A thermal power station is a type of power station in which heat energy is converted to electrical energy. In a steam-generating cycle heat is used to...
important class of power stations in the Middle East uses by-product heat for the desalination of water. The efficiency of a thermal powercycle is limited by...
cycle is a closed thermodynamic cycle where the working fluid goes through both subcritical and supercritical states. In particular, for powercycles...
suitable for powering the system's generator to generate electricity. The most commonly used heat cycle for OTEC to date is the Rankine cycle, using a low-pressure...
load in each cycle due to stored energy, is known as instantaneous reactive power, and its amplitude is the absolute value of reactive power.: 4 In a simple...
mph). Powered by a variety of engine types and designs, the motorized bicycle formed the prototype for what would later become the motor driven cycle. The...
A Simple-Cycle Combustion Turbine (SCCT) is a type of gas turbine typically used in the power generation, aviation (jet engine), and oil and gas industries...
by less expensive combined cycles in which the exhaust of a gas turbine or molten carbonate fuel cell heats steam to power a steam turbine. MHD dynamos...