Operation Accumulator was an Allied naval operation near the Channel Islands on the night of 12/13 June 1944, in support of Operation Overlord, the invasion of France.
As part of Operation Fortitude, a series of deception operations had been used to divert attention from the Allied landings by suggesting that a second invasion force was still waiting to land. This caused the defenders to divert their forces from the fighting in Normandy, holding them in reserve for an invasion in the Pas de Calais, to the east.
Some days after the initial landings, it was decided to mount a smaller operation to simulate a follow-up landing force heading for Granville, at the western side of the Cotentin Peninsula. The desired effect would be to force the German command to pull units from the front line and redeploy them to protect the western coast.
The plan was for two Royal Canadian Navy destroyers, Haida and Huron, to make a series of fake radio transmissions, which would be intercepted. The beginning of the operation went smoothly, with the two ships signalling that the invasion fleet had been delayed by engine problems, and giving a revised plan. However, the radios on the Haida broke down, forcing the Huron to continue alone; the two ships were also spotted by an Allied reconnaissance plane, which radioed back that it had found "unidentified warships".
The operation was a failure; whilst the signals were made, there was no reaction from the German force. This may have been helped by the Allied air report - the pilot would have been informed - and by a lack of any corroborating evidence; for example, there was no attempt at spoofing radar signals, as had been carried out for the main invasion by Operation Glimmer and Operation Taxable.
and 25 Related for: Operation Accumulator information
OperationAccumulator was an Allied naval operation near the Channel Islands on the night of 12/13 June 1944, in support of Operation Overlord, the invasion...
A hydraulic accumulator is a pressure storage reservoir in which an incompressible hydraulic fluid is held under pressure that is applied by an external...
Operation Mincemeat was a successful British deception operation of the Second World War to disguise the 1943 Allied invasion of Sicily. Two members of...
A battery electric multiple unit (BEMU), battery electric railcar or accumulator railcar is an electrically driven multiple unit or railcar whose energy...
A steam accumulator is an insulated steel pressure tank containing hot water and steam under pressure. It is a type of energy storage device. It can be...
operand architecture meant that the second operand of any operation was implicit: the accumulator or the program counter (instruction address); program instructions...
Operation Fortitude was a military deception operation by the Allied nations as part of Operation Bodyguard, an overall deception strategy during the...
Operation Bodyguard was the code name for a World War II deception strategy employed by the Allied states before the 1944 invasion of northwest Europe...
modulators/demodulators. An NCO generally consists of two parts: A phase accumulator (PA), which adds to the value held at its output a frequency control...
by repeated subtraction. The basic operation performed is to add (or subtract) the operand number to the accumulator register, as many times as desired...
Counts high-order zeros in upper accumulator. Value stored takes sign of accumulator, except after a divide operation; then sign of remainder is stored...
Operation Scherhorn (in English sources) or Operation Berezino (original Soviet codename) or Operation Beresino (in East German sources) was a secret deception...
perform long multiplications and divisions effectively by using a movable accumulator for the result. Patented in France by Thomas de Colmar in 1820 and manufactured...
for writers to assume their readers knew of and understood its basic operation.[citation needed] Around the turn of the century it began to be widely...
simple two function (addition and subtraction) calculator known as the Accumulator and a resettable counter known as the Program Counter. The Program Counter...
between accumulators. For operations requiring two operands, one was taken from the source accumulator, and one from the destination accumulator, and the...
the Fairchild 3800, consisting of an eight-bit arithmetic unit with accumulator. It only supported adds and subtracts but no logic functions. Full integrated-circuit...
(called the C-accumulator). A load/store or arithmetic/logical operation involving the accumulator and/or memory will be a 16-bit operation—two bus cycles...
Operation Copperhead was a small military deception operation run by the British during the Second World War. It formed part of Operation Bodyguard, the...
The Antiproton Accumulator (AA) was an infrastructure connected to the Proton–Antiproton Collider (SppS) – a modification of the Super Proton Synchrotron...
Multiply–accumulate operation is a common step that computes the product of two numbers and adds that product to an accumulator. The hardware used for...
Operation Fritham (30 April – 14 May 1942) was an Allied military operation during the Second World War to secure the coal mines on Spitsbergen, the main...
aircraft, but, unlike the other submarines, it had freshly recharged accumulator batteries. Because of this, it was able to remain submerged until it...
the accumulator by starting, then moving at a constant speed, and stopping. In particular, stopping is critical, because to obtain fast operation, the...
Global Information