The lowest curve which is not touched by the measured spectrum at any position in the audio frequency range is NC-45. The room represented by the black curve has an NC45 rating.
A list of Noise Criterion Curves for different types of rooms that should not be exceeded
Noise curves are a common way to characterise background noise in unoccupied buildings and spaces.[1] Their purpose is to produce a single-value representation of a complete sound spectrum.
International standards organizations (ISO,[2] ANSI[3] and ASA) recognize the need to objectify judgements on the amount of ambient noise in enclosed spaces, and provide us with definitions for various noise curves.[4] The ANSI/ASA S12.2-2008 standard, for example, recommends an NC value of 25-35 for schools and 15-18 for concert halls.[5]
Background noise may have several undesirable effects. Noise can be an annoyance that creates fatigue and negatively affects productivity, safety and the ability to communicate. Therefore, standard methodologies for quantifying noise have been developed.
Noise curves reflect different standardized means of creating a single number rating for the background noise spectrum in a space. Different rooms, locations, regulations, and applications may allow different acceptable noise ratings.
In most cases, the goal is that background noise should not interfere with the purpose of the room, e.g. the noise of an office air-conditioning system and consistent noise of traffic outside the building should not interfere with telephone calls or conversations.
In other cases, special noise may also be tolerated or even introduced at higher levels, for example to create acoustic "privacy", or to help mask other more irritating noise sources.
The process of determining the single value for a particular room is first to measure the sound frequency spectrum created by the background noise in the room while the room is unoccupied. This spectrum is then superimposed onto a template graph containing the noise curves. The result is determined by the lowest curve which is not touched by the measured spectrum at any position in the audio frequency range.
Noise curves serve as uniform measuring standards and are referred to by many noise regulations covering a variety of locations from concert halls, rock concerts, lecture rooms and offices to clay target shooting ranges.
There are five major methods and standards for noise curves:[4]
Noisecurves are a common way to characterise background noise in unoccupied buildings and spaces. Their purpose is to produce a single-value representation...
Pink noise, 1⁄f noise, fractional noise or fractal noise is a signal or process with a frequency spectrum such that the power spectral density (power...
of noise or noise spectrum refers to the power spectrum of a noise signal (a signal produced by a stochastic process). Different colors of noise have...
Grey noise is random noise whose frequency spectrum follows an equal-loudness contour (such as an inverted A-weighting curve). The result is that grey...
A receiver operating characteristic curve, or ROC curve, is a graphical plot that illustrates the performance of a binary classifier model (can be used...
Shot noise is white noise. Flicker noise is electronic noise with a 1/ƒ frequency spectrum; as f increases, the noise decreases. Flicker noise arises...
C curves were intended for louder sounds (though they are less used) while the D curve is used in assessing loud aircraft noise (IEC 537). B curves filter...
Background noise and unknown errors (which happen daily) are in the order of 10−20, while gravitational wave signals are around 10−22. After noise reduction...
Curve fitting is the process of constructing a curve, or mathematical function, that has the best fit to a series of data points, possibly subject to constraints...
interference and do not necessarily follow the typical forgetting curve as various noise and outside factors influence what information would be remembered...
Noise music is a genre of music that is characterised by the expressive use of noise. This type of music tends to challenge the distinction that is made...
the Elliptic Curve Digital Signature Algorithm (ECDSA) offers a variant of the Digital Signature Algorithm (DSA) which uses elliptic-curve cryptography...
Perlin noise is a type of gradient noise developed by Ken Perlin in 1983. It has many uses, including but not limited to: procedurally generating terrain...
distributed. A normal distribution is sometimes informally called a bell curve. However, many other distributions are bell-shaped (such as the Cauchy,...
environmental noise, or noise-induced hearing loss. Exposure to a single very loud noise such as a gun shot or bomb blast can cause noise-induced hearing...
yield curve is a yield curve in which short-term debt instruments (typically bonds) have a greater yield than longer term bonds. An inverted yield curve is...
Noise shaping is a technique typically used in digital audio, image, and video processing, usually in combination with dithering, as part of the process...
demonstrate a noise level 10 times worse than needed for LISA. However, LPF exceeded this goal by a large margin, approaching the LISA requirement noise levels...
The photon transfer curve shows the variance of the image sensor noise versus the mean value. For an ideal linear camera this curve should be linear. Only...
used when measuring noise in audio circuits, a different weighting curve, ITU-R 468 noise weighting uses a psophometric weighting curve and a quasi-peak...
high background noise of shellac discs. When the record was played back using a complementary inverse curve (de-emphasis), signal-to-noise ratio was improved...
1991 Noise criteria, a single-value measurement of background noise derived from a graphic representation of the sound pressure audio spectrum (noise curves)...
Global Information
