Micro heat exchangers,Micro-scale heat exchangers, or microstructured heat exchangers are heat exchangers in which (at least one) fluid flows in lateral confinements with typical dimensions below 1 mm. The most typical such confinement are microchannels, which are channels with a hydraulic diameter below 1 mm. Microchannel heat exchangers can be made from metal or ceramic.[1]
Microchannel heat exchangers can be used for many applications including:
high-performance aircraft gas turbine engines[2]
heat pumps[3]
Microprocessor and microchip cooling[4]
air conditioning[5]
^Kee, Robert J., et al. "The design, fabrication, and evaluation of a ceramic counter-flow microchannel heat exchanger." Applied Thermal Engineering 31.11 (2011): 2004-2012.
^Northcutt, B., & Mudawar, I. (2012). Enhanced design of cross-flow microchannel heat exchanger module for high-performance aircraft gas turbine engines. Journal of Heat Transfer, 134(6), 061801.
^Moallem, E., Padhmanabhan, S., Cremaschi, L., & Fisher, D. E. (2012). Experimental investigation of the surface temperature and water retention effects on the frosting performance of a compact microchannel heat exchanger for heat pump systems. international journal of refrigeration, 35(1), 171-186.
^Sarvar-Ardeh, S., Rafee, R., Rashidi, S. (2021). Hybrid nanofluids with temperature-dependent properties for use in double-layered microchannel heat sink; hydrothermal investigation. Journal of the Taiwan Institute of Chemical Engineers. cite journal https://doi.org/10.1016/j.jtice.2021.05.007
^Xu, B., Shi, J., Wang, Y., Chen, J., Li, F., & Li, D. (2014). Experimental Study of Fouling Performance of Air Conditioning System with Microchannel Heat Exchanger.
and 27 Related for: Micro heat exchanger information
Microheatexchangers, Micro-scale heatexchangers, or microstructured heatexchangers are heatexchangers in which (at least one) fluid flows in lateral...
A heatexchanger is a system used to transfer heat between a source and a working fluid. Heatexchangers are used in both cooling and heating processes...
A regenerative heatexchanger, or more commonly a regenerator, is a type of heatexchanger where heat from the hot fluid is intermittently stored in a...
Heatexchangers are devices that transfer heat to achieve desired heating or cooling. An important design aspect of heatexchanger technology is the selection...
calculation of heat transfer in heatexchangers, but can be applied equally well to other problems. For the case of a heatexchanger, U {\displaystyle...
Microreactors are studied in the field of micro process engineering, together with other devices (such as microheatexchangers) in which physical processes occur...
system. Regenerative describes the use of a specific type of internal heatexchanger and thermal store, known as the regenerator. Strictly speaking, the...
engine. Heatexchangers transfer heat from a hot stream to a cold stream of air, water or oil. A heat pipe heatexchanger contains several heat pipes of...
Research conducted with propane in MicroGroove has implications for heatexchanger coils used in refrigerators, heat pumps and commercial air conditioning...
formation between foils can be explained by microscopic deformation of micro-asperities on the top foil. The sonotrode surface is usually textured so...
Algorithm Electrically heated microheatexchanger: this device has been developed to accelerate fluid and heatexchange in reduced systems. RoboCup Rescue...
useful heat from a single source of combustion. The condensing furnace is a forced-air gas system with a secondary heatexchanger that allows heat to be...
Orr as its lead engineer. The team independently developed a heat recovery air exchanger (HRV), hot water recovery, and a blower-door apparatus to measure...
and the corresponding effects of fouling: Heatexchanger surfaces – reduces thermal efficiency, decreases heat flux, increases temperature on the hot side...
Advanced Micro Devices, Inc. (AMD) is an American multinational corporation and semiconductor company based in Santa Clara, California, that develops...
Micro process engineering is the science of conducting chemical or physical processes (unit operations) inside small volumina, typically inside channels...
efficiency Thermal efficiency Wobbe index: heat density "Effect of structural conduction and heat loss on combustion in micro-channels". Taylor & Francis Online...
vapour found in the exhaust gases in a heatexchanger to preheat the circulating water. This recovers the latent heat of vaporisation, which would otherwise...
rocket (heatexchanger (HX) thruster) is a thermal rocket in which the propellant is heated by energy provided by an external laser beam. The beam heats a solid...
first activities, which were focused on developing and testing microheatexchangers, were expanded by a new group (Head: Maximilian Fichtner) to chemical...
with water. If a heat transfer fluid is used, a heatexchanger is typically employed to transfer heat from the solar collector fluid to a hot water storage...
solar absorber made of dark-colored sheet metal, attached to copper heatexchanger pipes, or a set of metal tubes surrounded by an evacuated (near vacuum)...
where: qx: the heat liberated or absorbed by the process (W) U: the heat transfer coefficient of the heatexchanger (W/(m2K)) A: the heat transfer area...
is the watercooling equivalent of a heatsink. It is a type of plate heatexchanger and can be used on many different computer components,: 186 including...
cooled exclusively by passive heatexchange between the computer hardware and the enclosure it is placed in. A heatexchanger (i.e. heater core or radiator)...