This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources. Find sources: "LNER Class Y3" – news · newspapers · books · scholar · JSTOR(December 2014)
LNER Class Y3
Type and origin
Power type
Steam
Designer
Sentinel Waggon Works
Builder
Sentinel Waggon Works
Build date
1927-1931
Total produced
32
Specifications
Configuration:
• Whyte
0-4-0 geared tank
Gauge
4 ft 8+1⁄2 in (1,435 mm)
Driver dia.
2 ft 6 in (0.76 m)
Loco weight
20.8 long tons (21.1 t)
Fuel type
coal
Boiler pressure
275 psi (1.90 MPa) water tube boiler
Cylinders
two
Cylinder size
6+3⁄4 in × 9 in (170 mm × 230 mm)
Performance figures
Tractive effort
see text
Career
Axle load class
Route Availability 1
The LNER Class Y3 was a class of 0-4-0 geared steam locomotives built by Sentinel Waggon Works for the London and North Eastern Railway and introduced in 1927. They passed into British Railways ownership in 1948 and were numbered 68154-68185.[1] At least one was based at Immingham in 1950.[2]
^Ian Allan ABC of British Railways Locomotives, 1948 edition, part 4, page 47
The LNERClassY3 was a class of 0-4-0 geared steam locomotives built by Sentinel Waggon Works for the London and North Eastern Railway and introduced...
Yamamoto's fashion line with Adidas LNERClassY3, a class of 0-4-0 geared steam locomotives built by Sentinel Waggon Works SJ Y3, a series of diesel railcars...
The LNERClass A4 is a class of streamlined 4-6-2 steam locomotive designed by Nigel Gresley for the London and North Eastern Railway in 1935. Their streamlined...
Railway (LNER) Thompson Class B1 is a class of steam locomotive designed by Edward Thompson for medium mixed traffic work. It was the LNER's equivalent...
Eastern Railway (LNER) Class J39 was a class of medium powered 0-6-0 steam locomotive designed for mixed-traffic work throughout the former LNER system between...
ordered a further ten '1470-class' locomotives, which were under construction at Doncaster at the time of the formation of the LNER in 1923. This included...
The London and North Eastern Railway (LNER) D49 Class is a class of 4-4-0 steam locomotives designed by Nigel Gresley. They were named after fox hunts...
Eastern Railway (LNER) Class V2 2-6-2 steam locomotives were designed by Sir Nigel Gresley for express mixed traffic work, and built at the LNER shops at Doncaster...
Flying Scotsman is a LNERClass A3 4-6-2 "Pacific" steam locomotive built in 1923 for the London and North Eastern Railway (LNER) at Doncaster Works to...
Eastern Railway (LNER) J94 Class is a class of steam locomotive that was formed when 75 former "Austerity" 0-6-0STs were purchased by the LNER in 1946 from...
A4. Between 1943 and 1944 the class were rebuilt under Gresley's successor Edward Thompson into the LNER Thompson Class A2/2 4-6-2 type. The locomotives...
London and North Eastern Railway (LNER) Class O4 initially consisted of the 131 ex-Great Central Railway (GCR) Class 8K 2-8-0 steam locomotives acquired...
(LNER) Peppercorn Class A2 is a class of steam locomotive designed for express passenger work by Arthur Peppercorn, the chief designer of the LNER after...
The London and North Eastern Railway (LNER) Class B17, also known as "Sandringham" or "Footballer" class was a class of 4-6-0 steam locomotive designed by...
in dock traffic and the increased use of Sentinel shunters (LNERClass Y1 and LNERClassY3) led to the scrapping of three Y8s in 1936/7. Numbers 559 and...
The LNERClass Y1 was a class of 0-4-0 geared steam locomotives built by Sentinel Waggon Works for the London and North Eastern Railway and introduced...
Eastern Railway (LNER) Class A2 was a class of 4-6-2 steam locomotive designed by Vincent Raven for the North Eastern Railway (as NER class 4.6.2). Two were...
consisted of an LNERClass O4 locomotive with 60+ loaded coal wagons then an assisting engine at the rear, usually another O4 or an Ex-GCR Class 1B, and finally...
GCR design LNERClass T1 – NER Class X LNERClass Y1 – Sentinel shunter LNERClassY3 – Sentinel shunter LNERClass Y7 – NER Class H LNERClass Y10 – Sentinel...
London and North Eastern Railway's (LNER) Peppercorn Class A1 is a class of 4-6-2 "Pacific" steam locomotives built between 1948 and 1949 at Doncaster...
the L.N.E.R., Part 6B: Tender Engines—Classes O1 to P2. Kenilworth: RCTS. pp. 153–163. ISBN 0-901115-54-1. Cliffe, J.; Clay, J. F. (1973). The LNER's 2-6-2...
The LNER W1 No. 10000 (also known as the Hush-Hush due to its secrecy) was an experimental steam locomotive fitted with a high pressure water-tube boiler...
Railway Class V4 was a class of 2-6-2 steam locomotive designed by Sir Nigel Gresley for mixed-traffic use. It was Gresley's last design for the LNER before...
The London and North Eastern Railway (LNER) Class K4 is a class of 2-6-0 steam locomotives designed by Nigel Gresley for the steep grades of the West...
The London and North Eastern Railway (LNER) Thompson Class B2 was a class of 4-6-0 steam locomotive. It was introduced in 1945 as a two-cylinder rebuild...
or "Gresley A1", a class of 52 Pacific locomotives designed by Sir Nigel Gresley, including Flying Scotsman The LNER Thompson Class A1/1, a single Pacific...
The LNERClass V2 2-6-2 steam locomotive, number 4771 Green Arrow was built in June 1936 for the London and North Eastern Railway (LNER) at Doncaster...
The NER Class Z (LNERClass C7) was an Atlantic class of locomotives designed by Vincent Raven. It was introduced in 1911. Vincent Raven had been appointed...
Global Information