This article is about the series as a whole. For the primary document forming the basis for all other Eurocodes, see Eurocode: Basis of structural design.
0: Structural safety, service- ability and durability
1: Actions on structures
Material-specific design and detailing:
2: Concrete
3: Steel
4: Composite
5: Timber
6: Masonry
9: Aluminium
7: Geotechnics
8: Earthquake
Eurocodes (EN 199-)
The Eurocodes are the ten European standards (EN; harmonised technical rules) specifying how structural design should be conducted within the European Union (EU). These were developed by the European Committee for Standardization upon the request of the European Commission.[1]
The purpose of the Eurocodes is to provide:[1]
a means to prove compliance with the requirements for mechanical strength and stability and safety in case of fire established by European Union law.[2]
a basis for construction and engineering contract specifications.
a framework for creating harmonized technical specifications for building products (CE mark).
By March 2010, the Eurocodes are mandatory for the specification of European public works and are intended to become the de facto standard for the private sector. The Eurocodes therefore replace the existing national building codes published by national standard bodies (e.g. BS 5950), although many countries had a period of co-existence.[3] Additionally, each country is expected to issue a National Annex to the Eurocodes which will need referencing for a particular country (e.g. The UK National Annex). At present, take-up of Eurocodes is slow on private sector projects and existing national codes are still widely used by engineers.
The motto of the Eurocodes is "Building the future".[4] The second generation of the Eurocodes (2G Eurocodes) is being prepared.[5][6]
^ abEN 1990:2002 E, Eurocode - Basis of Structural Design, CEN, November 29, 2001
^European Council Directive 89/106/EEC
^"Eurocodes: ready in 2008 - but are you?". New Civil Engineer. 2007-11-01. Retrieved 2023-02-11.
Annex to the Eurocodes which will need referencing for a particular country (e.g. The UK National Annex). At present, take-up of Eurocodes is slow on private...
complementary information (NCCI) to the Eurocodes and offer means of compliance with the requirements of the Eurocodes, typically using closed-form solutions...
purpose and a more expensive brick chosen for its appearance. In the Eurocodes, the continuous vertical section is referred to as a leaf. A single-leaf...
enforced by the Eurocodes. Allowable stress design Probabilistic design Seismic performance Structural engineering EN 1990:2002 E, Eurocode - Basis of Structural...
design standards, the EUROCODES, the development of which was decided by the European Union in 1975. The introduction of the Eurocodes meant a paradigm shift...
test methods EN 1990: (Eurocode 0) Basis of structural design EN 1991: (Eurocode 1) Actions on structures EN 1992: (Eurocode 2) Design of concrete structures...
to give the same load effects as the characteristic maximum values. The Eurocode is an example of a standard for bridge traffic loading that was developed...
Each country now has National Annexes to localize the contents of the Eurocodes. Similarly, in India, each municipality and urban development authority...
Standardization List of EN standards List of CEN technical committees Eurocodes Council Directive 83/189/EEC of 28 March 1983 laying down a procedure...
Society of Civil Engineers. 2006. p. 1. ISBN 0-7844-0809-2. "1.5.3.1". Eurocode 0: Basis of structural design EN 1990. Bruxelles: European Committee for...
the original cause – as defined in EN 1991-1-7 of the Accidental Actions Eurocode. A structure designed and constructed to be robust should not suffer from...
sector.[citation needed] However, each modular home must comply with EU's Eurocodes and local building codes.[citation needed] In the United Kingdom, the...
humanoid in south Slavic mythology VEd – design shear force according to Eurocodes Ved, a 2022 Indian Marathi-language film Lea Ved, American dancer and...
structures Structural Engineering Association – International The EN Eurocodes are a series of 10 European Standards, EN 1990 – EN 1999, providing a...
consideration for loads on structures. To address these, European countries employ Eurocode 1: Actions on structures - Part 1-3: General actions - Snow loads. In North...
these standards are part of European Union law. List of EN standards Eurocodes European standards explanation at CEN-CENELEC European standards explanation...
America, but Z in Britain/Australia, and vice versa for the plastic modulus. Eurocode 3 (EN 1993 - Steel Design) resolves this by using W for both, but distinguishes...
material properties, loads and combination information, and analysis results. Eurocode 8: Part 1 contains specific requirements and recommendations for building...