This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Dunlop valve" – news · newspapers · books · scholar · JSTOR(September 2010) (Learn how and when to remove this message)
Dunlop valve stem
Dunlop valve with tube
Dunlop valve without tube
The Dunlop valve, (also called a Woods valve, an English valve or a Blitz valve[1]) is a type of pneumatic valve stem in use—mostly on inner tubes of bicycles—in many countries, including Japan,[2] Korea, India, Pakistan, Sri Lanka, most European countries, and a number of developing countries. The Dunlop valve has a wider base than a Presta valve, similar enough in size to a Schrader valve to use identically drilled valve holes in rims,[3] but it can be inflated with a Presta valve adapter.[4] The inner mechanism of the valve can be replaced easily, without the need for special tools.
The Dunlop valve originally used a tight rubber sleeve (see illustration of "original plug") which had to be forced open by air pressure while pumping (not only were these difficult to inflate, but the rubber would perish over time, allowing leakage and eventually, complete failure), but modern Dunlop valves use a different plug (core) using either an internal ball bearing or a spring-loaded rubber plug that is unseated by pumping, making the valve as easy to pump as a Presta valve.
The inventor was C. H. Woods. It superseded Dunlop's original valve for pneumatic tyres.[5]
Dunlop valves are uncommon on bicycles in the USA, where either Presta or Schrader valves are used.
^"12 1/2X1.75 Blitz No Flat Los". Blitz ventiel
^"Japan Cycling Navigator:Information: Bikes in Japan: Tyres and Tubes". www.japancycling.org. Retrieved 1 June 2009.
^"Inner tube buying guide". 8 October 2018. Retrieved 10 October 2018.
^Sheldon Brown. "Glossary: Woods Valve". Retrieved 1 December 2010.
^Moulton, Dave (21 August 2007). "John Boyd Dunlop". Dave Moulton's Blog. Retrieved 9 January 2013.
The Dunlopvalve, (also called a Woods valve, an English valve or a Blitz valve) is a type of pneumatic valve stem in use—mostly on inner tubes of bicycles—in...
French valves, Sclaverand valves, and road bike valves. Dunlopvalves are also known as German valves, English valves, Holland valves, Woods valves, flash...
compared to Dunlop and Schrader valves, measuring 8 mm (0.31 in). The weakest point of a bicycle rim is usually the hole for the valve stem. The smaller...
Dunlop India Dunlop (surname) Dunlopvalve, a valve stem still widely used on bicycle tires in many countries Dunlop cheese, made in Scotland Dunlop v...
opened to inflate/deflate. Dunlopvalves (also called Woods valves or English valves) were the dominating bicycle valves in the European region and many...
firmly onto valve stems of the wheels. The air inflation gauge displays the air pressure within the tire when the air hose is connected to the valve stem. The...
preset level upstream of the valve Presta valve, Schrader valve, or Dunlopvalve, holds the air inside bicycle tires Reed valve: consists of two or more flexible...
1960s, Formula One tyres were supplied by Dunlop, Englebert, Firestone, Continental and Goodyear. In 1958, Dunlop introduced its R5 racing tyre, replacing...
that contains air to inflate a tire. Has a Schrader, "Woods"/"Dunlop" or Presta valve for inflation and deflation Jockey wheel or Pulley wheel: one of...
puncturing of the tire a flat can be caused by: failure of or damage to the valve stem; a nail in the tire; rubbing of the tire against the road; ripping...
hand-held tire-pressure gauges which can be temporarily attached to the valve stem to check a tire's interior air pressure. This measurement of tire inflation...
tight against the wheel. The internal beadlock is inflated via its own valve stem. The side of the beadlock closest to the tread, the "case", has a layer...