A device under test (DUT), also known as equipment under test (EUT) and unit under test (UUT), is a manufactured product undergoing testing, either at first manufacture or later during its life cycle as part of ongoing functional testing and calibration checks. This can include a test after repair to establish that the product is performing in accordance with the original product specification.
delivered by a deviceundertest with those of a calibration standard of known accuracy. Such a standard could be another measurement device of known accuracy...
A test fixture is a device used to consistently test some item, device, or piece of software. Test fixtures are used in the testing of electronics, software...
for a series of tests to get more and more precise, according to the quantity of quality of the system in test. DeviceundertestTest harness "ISTQB Glossary"...
the current through a deviceundertest is less than a specified limit at the required test potential and time duration, the device meets the dielectric...
Automatic test equipment or automated test equipment (ATE) is any apparatus that performs tests on a device, known as the deviceundertest (DUT), equipment...
Electronic test equipment is used to create signals and capture responses from electronic devicesundertest (DUTs). In this way, the proper operation...
the deviceundertest (DUT). In the context of software or firmware or hardware engineering, a test bench is an environment in which the product under development...
A test probe is a physical device used to connect electronic test equipment to a deviceundertest (DUT). Test probes range from very simple, robust devices...
two-dimensional graph. This allows the test engineer to visually observe the operating ranges of the deviceundertest. This process of varying the conditions...
thyristors, and vacuum tubes. The device contains voltage and current sources that can be used to stimulate the deviceundertest (DUT). The function is to apply...
with the response of vectors (using the same patterns) from a DUT (deviceundertest). If the response is the same or matches, the circuit is good. Otherwise...
antistatic devices, and controlling humidity. ESD simulators may be used to test electronic devices, for example with a human body model or a charged device model...
exchange Automatic test equipment, any apparatus that performs tests on a device, known as the DeviceUnderTest (DUT) or Unit UnderTest (UUT), using automation...
LCD, transistor) manufacture where a camera autonomously scans the deviceundertest for both catastrophic failure (e.g. missing component) and quality...
testing and servicing, an isolation transformer is a 1:1 (under load) power transformer used for safety. Without it, exposed live metal in a device under...
Readings should be reasonably accurate if the capacitor or inductor deviceundertest does not have a significant resistive component of impedance. More...
common-mode signal SCCab propagating through the deviceundertest. For a properly designed SDDab differential device there should be minimal common-mode output...
product safety and regulatory testing for potential fire hazards. Cheesecloth is wrapped tightly over the deviceundertest, which is then subjected to...
Ivy Mike was the codename given to the first full-scale test of a thermonuclear device, in which part of the explosive yield comes from nuclear fusion...
frequency of the test signal is kept constant while the amplitude is varied. Typically the amplitude and distortion of the deviceundertest are measured...
nuclear bomb test on 18 May 1974. The bomb was detonated on the army base Pokhran Test Range (PTR), in Rajasthan, by the Indian Army under the supervision...
include probes that temporarily connect the instrument to the device or circuit undertest, and offer some intrinsic safety features to protect the operator...
classification of the dielectric condition (new, strongly aged, faulty) of the deviceundertest and appropriate maintenance and repair measures may be planned and...
field strengths are near-field effects, and are only important if the deviceundertest (DUT) is designed for location close to other electrical equipment...
the testedDeviceUnderTest (DUT), must successfully pass the following two categories of tests: 1. Conformance tests: the tested DUT is tested against...