This article may be written from a fan's point of view, rather than a neutral point of view. Please clean it up to conform to a higher standard of quality, and to make it neutral in tone.(May 2014) (Learn how and when to remove this message)
A cone calorimeter is an instrument used to study the behavior of fire in small samples of condensed phase materials. It is widely used in the field of fire safety engineering and in oxygen consumption calorimetry.[1]
The instrument gathers data about the ignition time, mass loss, combustion products, heat release rate, and other parameters associated with the sample's burning properties. The measurement of the heat release rate is based on Huggett's principle[2] that the gross heat of combustion of any organic material is directly related to the amount of oxygen required for combustion. Its name comes from the conical shape of a radiant heater incorporated into the instrument that can produce a nearly uniform heat flux over the surface of the sample under study.[3]
^Twilley, William H. (1988). "User's Guide for the Cone Calorimeter". NASA Sti/Recon Technical Report N. 89: 22086. Bibcode:1988STIN...8922086T.
^Hugget, C (1980). "Estimation of rate of heat release by means of oxygen consumption measurements". Fire and Materials. 4 (2): 61–65. CiteSeerX 10.1.1.208.8855. doi:10.1002/fam.810040202.
^Beyler, Craig (14 January 2017). "Oxygen consumption calorimetry, William Parker: 2016 DiNenno Prize". Fire Science Reviews. 61 (1). doi:10.1186/s40038-016-0016-z. Material was copied from this source, which is available under a Creative Commons Attribution 4.0 International License.
A conecalorimeter is an instrument used to study the behavior of fire in small samples of condensed phase materials. It is widely used in the field of...
spectrometer in 1995, the transition radiation detectors in 1999 to a large jet calorimeter added in 2007. ALICE recorded data from the first lead-lead collisions...
Recording light from both primary and secondary particles, for a Cherenkov calorimeter the total light yield is proportional to the incident particle energy...
of filtering. In order to achieve this, a cone-like shaped piece of filter paper is usually folded into a cone and placed within the funnel. The suspension...
(without barrel part of the electromagnetic calorimeter) was completed in 2009. The missing part of the calorimeter was installed in the fall of 2010. T2K...
projected to the sky. Finally, their total energy was measured in a large calorimeter scintillation detector at the rear of the instrument. The EGRET instrument...
be more flexible for other geometries as well. "Cone and plate" viscometers use a narrow-angled cone in close proximity to a flat plate. With this system...
in 1861 by German chemist Emil Erlenmeyer (1825–1909)] - is shaped like a cone, usually completed by the ground joint, the conical flasks are very popular...
profile of a coal, the energy output of a coal is determined using a bomb calorimeter which measures the specific energy output of a coal during complete combustion...
remains in the separatory funnel. A separating funnel takes the shape of a cone with a hemispherical end. It has a stopper at the top and stopcock (tap)...
Used in transferring liquids in small containers. Funnels known as killing cones are used to slaughter individual birds in poultry farming. The funnel is...
at least the mid-1800s. cylindrical type graduated and ungraduated with cone and socket with pressure equalizing tube pear shaped, graduated and ungraduated...
particle type of high-momentum tracks. The electromagnetic and hadronic calorimeters provide measurements of the energy of electrons, photons, and hadrons...
The needle will be flamed at a downward angle through the flame's inner cone until it is red-hot. The downward angle will minimize the amount of microbial...
holes, so that the flame the burner produces consists of many aerated small cones whereas in the Teclu burner, only one single flame is produced. There is...