Ratio of useful heating or cooling provided to work required
The coefficient of performance or COP (sometimes CP or CoP) of a heat pump, refrigerator or air conditioning system is a ratio of useful heating or cooling provided to work (energy) required.[1][2] Higher COPs equate to higher efficiency, lower energy (power) consumption and thus lower operating costs. The COP is used in thermodynamics.
The COP usually exceeds 1, especially in heat pumps, because instead of just converting work to heat (which, if 100% efficient, would be a COP of 1), it pumps additional heat from a heat source to where the heat is required. Most air conditioners have a COP of 2.3 to 3.5[citation needed]. Less work is required to move heat than for conversion into heat, and because of this, heat pumps, air conditioners and refrigeration systems can have a coefficient of performance greater than one.
The COP is highly dependent on operating conditions, especially absolute temperature and relative temperature between sink and system, and is often graphed or averaged against expected conditions.[3]
Performance of absorption refrigerator chillers is typically much lower, as they are not heat pumps relying on compression, but instead rely on chemical reactions driven by heat.[4]
^"Archived copy" (PDF). Archived from the original (PDF) on 2013-01-24. Retrieved 2013-10-16.{{cite web}}: CS1 maint: archived copy as title (link)
^"COP (Coefficient of performance)". us.grundfos.com. Archived from the original on 2014-06-28. Retrieved 2019-04-08.
^"Archived copy" (PDF). Archived from the original (PDF) on 2009-01-07. Retrieved 2013-10-16.{{cite web}}: CS1 maint: archived copy as title (link)
^"Coefficient of Performance - Measuring Efficiency in HVAC Systems". Fargo Heating and Cooling. Retrieved November 6, 2023.
and 26 Related for: Coefficient of performance information
The coefficientofperformance or COP (sometimes CP or CoP) of a heat pump, refrigerator or air conditioning system is a ratio of useful heating or cooling...
systems. The efficiency of a heat pump is expressed as a coefficientofperformance (COP), or seasonal coefficientofperformance (SCOP). The higher the...
development of the vapor compression cycle, it lost much of its importance because of its low coefficientofperformance (about one fifth of that of the vapor...
In statistics, the coefficientof determination, denoted R2 or r2 and pronounced "R squared", is the proportion of the variation in the dependent variable...
seeded draw of groups in the UEFA Euro final tournament. Association coefficient: used to rank the collective performanceof the clubs of each member...
for a given cooling capacity and poor power efficiency (a low coefficientofperformance or COP). Many researchers and companies are trying to develop...
ratio of the net work output to the heat input; in the case of a heat pump, thermal efficiency (known as the coefficientofperformance) is the ratio of net...
HSPF is related to the non-dimensional CoefficientofPerformance (COP) for a heat pump, which measures the ratio of heat delivered to work done by the compressor...
the automobile drag coefficient in addition to the other performance characteristics. Aerodynamic drag increases with the square of speed; therefore it...
SEER is the ratio of cooling in British thermal units (BTUs) to the energy consumed in watt-hours. The coefficientofperformance (COP), a more universal...
In economics, the Gini coefficient (/ˈdʒiːni/ JEE-nee), also known as the Gini index or Gini ratio, is a measure of statistical dispersion intended to...
In probability theory and statistics, the coefficientof variation (CV), also known as normalized root-mean-square deviation (NRMSD), percent RMS, and...
from an intermediate temperature level to a high temperature level by means of an absorption process. It is driven by the temperature difference between...
Seebeck coefficient (also known as thermopower, thermoelectric power, and thermoelectric sensitivity) of a material is a measure of the magnitude of an induced...
In statistics, the phi coefficient (or mean square contingency coefficient and denoted by φ or rφ) is a measure of association for two binary variables...
fuel in a boiler/furnace or by use of resistive electric heaters. Efficiency is given as a coefficientofperformance (CoP) which is typically in the range...
to install, so are the most widely used type. In mild weather, coefficientofperformance (COP) may be between 2 and 5, while at temperatures below around...
convert it. It is not called efficiency, but the coefficientofperformance, or COP. It is a ratio of useful heating or cooling provided relative to the...
coefficientofperformance in cooling mode of a system is 3, and the coefficientofperformance in heating mode is 4, then heat recovery performance can...
high coefficientof friction. Coefficientsof friction range from near zero to greater than one. The coefficientof friction between two surfaces of similar...
achieve around 150% – 600% efficiency for heating, or COP 1.5 - 6.0 Coefficientofperformance, because it uses electric power only for transferring existing...
heat source. The performanceof the absorption heat pump is indicated by the coefficientofperformance (COP). The COP is the ratio of the removed (for...
performance indicators for an adsorption refrigeration system are the coefficientofperformance and the specific cooling effect. The refrigerants used in absorption...
developed for this application. The so-called coefficientofperformance (COP; denoted ξ {\displaystyle \xi } ) of coolers is defined as the ratio between the...
transmission coefficient describes the amplitude, intensity, or total power of a transmitted wave relative to an incident wave. Different fields of application...
was a step forward as a complement and enhancement of previous metrics like coefficientofperformance (COP) and Seasonal Energy Efficiency Ratio (SEER)...
Global Information