Centrifugal pump selection and characteristics information
The basic function of a pump is to do work on a liquid. It can be used to transport and compress a liquid. In industries heavy-duty pumps are used to move water, chemicals, slurry, food, oil and so on. Depending on their action, pumps are classified into two types — Centrifugal Pumps and Positive Displacement Pumps. While centrifugal pumps impart momentum to the fluid by motion of blades, positive displacement pumps transfer fluid by variation in the size of the pump’s chamber. Centrifugal pumps can be of rotor or propeller types, whereas positive displacement pumps may be gear-based, piston-based, diaphragm-based, etc.
As a general rule, centrifugal pumps are used with low viscosity fluids and positive displacement pumps are used with high viscosity fluids.
and 25 Related for: Centrifugal pump selection and characteristics information
oil and so on. Depending on their action, pumps are classified into two types — CentrifugalPumpsand Positive Displacement Pumps. While centrifugal pumps...
Centrifugal compressors, sometimes called impeller compressors or radial compressors, are a sub-class of dynamic axisymmetric work-absorbing turbomachinery...
There are three basic types of pumps: positive-displacement, centrifugaland axial-flow pumps. In centrifugalpumps the direction of flow of the fluid...
cavitation during the pump's operation on the suction side. It is defined by centrifugaland axial pumps' inherent physical characteristicsand operating point...
especially when creating suction in a pump or compressor. An impeller is a rotating component of a centrifugalpump that accelerates fluid outward from...
efficiency and feed capacity. The separation process in a decanter centrifuge relies on a few process characteristics such as centrifugal force or G-force...
maintain the proper amount of tension on the belt. Simple CVTs combining a centrifugal drive pulley with a spring-loaded driven pulley often use belt tension...
the principle of centrifugal force to separate solids from liquids by density difference. High rotation speed provides high centrifugal force that allows...
flow, directly connected to a centrifugalpump that boosts the output pressure, reducing the pressure needed from the pumpand thereby its energy input, similar...
curve at right. Suitable for most low performance loads such as centrifugalpumpsand fans, Design B motors are constrained by the following typical torque...
centrifugal fan may become noisy due to build up which cannot effectively be removed with vinegar for example. However, the fan can be replaced, and the...
where both the stationary and mobile phases are liquids and the liquid stationary phase is held stagnant by a strong centrifugal force. The operating principle...
interface and condenses back into a liquid, releasing the latent heat. The liquid then returns to the hot interface through capillary action, centrifugal force...
relatively large machine which included a 25 stage centrifugal compressor designed by Auguste Rateau and built by the Brown Boveri Company. The gas turbine...
"forced convection." In this case, the fluid is forced to flow by use of a pump, fan, or other mechanical means. Thermal radiation occurs through a vacuum...
a pit, or water wheels and Archimedes screws. Small micro hydro installations may successfully use industrial centrifugalpumps, run in reverse as prime...
pressure plate centrifugally actuated to engage at around 600rpm. Pure racing cars, such as the ERA, avoided a clutch altogether and relied on the progressive...
additive (pure concentrate) and the mixture (diluted solution) are called antifreeze, depending on the context. Careful selection of an antifreeze can enable...
treatment systems) to large centralized systems involving a network of pipes andpump stations (called sewerage) which convey the sewage to a treatment plant...
their characteristics differ. For example, a pumped-hydro station is well suited for bulk load management applications due to their large capacities and power...
became home to many Viet Cong strongholds and logistics bases. In 1961, the US Navy brought airboats andpump-jet boats, neither of which rely on propellers...
patented in 1784. A throttle valve to control the power of the engine, and a centrifugal governor, patented in 1788, to keep it from "running away" were very...
scavenged by electrically-driven centrifugalpumpsand fed to the header tanks. Sources indicate as many as 22 separate pumps were used for this, each with...