Type of furnace used for smelting to produce industrial metals
A blast furnace is a type of metallurgical furnace used for smelting to produce industrial metals, generally pig iron, but also others such as lead or copper. Blast refers to the combustion air being supplied above atmospheric pressure.[1]
In a blast furnace, fuel (coke), ores, and flux (limestone) are continuously supplied through the top of the furnace, while a hot blast of air (sometimes with oxygen enrichment) is blown into the lower section of the furnace through a series of pipes called tuyeres, so that the chemical reactions take place throughout the furnace as the material falls downward. The end products are usually molten metal and slag phases tapped from the bottom, and waste gases (flue gas) exiting from the top of the furnace.[2] The downward flow of the ore along with the flux in contact with an upflow of hot, carbon monoxide-rich combustion gases is a countercurrent exchange and chemical reaction process.[3]
In contrast, air furnaces (such as reverberatory furnaces) are naturally aspirated, usually by the convection of hot gases in a chimney flue. According to this broad definition, bloomeries for iron, blowing houses for tin, and smelt mills for lead would be classified as blast furnaces. However, the term has usually been limited to those used for smelting iron ore to produce pig iron, an intermediate material used in the production of commercial iron and steel, and the shaft furnaces used in combination with sinter plants in base metals smelting.[4][5]
Blast furnaces are estimated to have been responsible for over 4% of global greenhouse gas emissions between 1900 and 2015, but are difficult to decarbonize.[6]
^See: Draft (boiler)
^Schmult, Brian (2016). "Evolution of the Hopewell Furnace Blast Machinery". IA. The Journal of the Society for Industrial Archeology. 42 (2): 5–22.
^Development of heat transfer circuits in the blast furnace, IOP Conference Series: Materials Science and Engineering
^P J Wand, "Copper smelting at Electrolytic Refining and Smelting Company of Australia Ltd., Port Kembla, N.S.W.", in: Mining and Metallurgical Practices in Australasia: The Sir Maurice Mawby Memorial Volume, Ed J T Woodcock (The Australasian Institute of Mining and Metallurgy: Melbourne, 1980) 335–340.
^R J Sinclair, The Extractive Metallurgy of Lead (The Australasian Institute of Mining and Metallurgy: Melbourne, 2009), 9–12.
^Cite error: The named reference :0 was invoked but never defined (see the help page).
A blastfurnace is a type of metallurgical furnace used for smelting to produce industrial metals, generally pig iron, but also others such as lead or...
Blastfurnace gas (BFG) is a by-product of blastfurnaces that is generated when the iron ore is reduced with coke to metallic iron. It has a very low...
which has liquid pig-iron from the blastfurnace and scrap steel as the main feed materials, and electric arc furnace (EAF) steelmaking, which uses scrap...
a large area of land which dominates the east of the town. Its two blastfurnaces and steel production plant buildings are major landmarks visible from...
decarburisation was complete. The efficiency of the blastfurnace was improved by the change to hot blast, patented by James Beaumont Neilson in Scotland...
The BlastFurnace is a 1950 North Korean film directed by Min Chongshik. The script was written by Kim Yonggun. It was produced by the Division of Film...
Hot blast refers to the preheating of air blown into a blastfurnace or other metallurgical process. As this considerably reduced the fuel consumed, hot...
blast furnace may have been cast directly into molds. During the Han dynasty (202 BC – 220 AD), most, if not all, iron smelted in the blastfurnace was...
(Rundholzkerze)" (PDF). Sektion Basel (in German). "Schweden-Feuer". kroetenloch.de (in German). (burning) Swedish Torch - "Blastfurnace" style on YouTube...
An electric arc furnace (EAF) is a furnace that heats material by means of an electric arc. Industrial arc furnaces range in size from small units of...
only produced from the blastfurnaces, but also by remelting pig iron in air furnaces, a variant of the reverberatory furnace. The Company also became...
Sloss Furnaces is a National Historic Landmark in Birmingham, Alabama in the United States. It operated as a pig iron-producing blastfurnace from 1882...
reduction of iron ore in a blastfurnace. Integrated mills may also adopt some of the processes used in mini-mills, such as arc furnaces and direct casting,...
Metallurgical furnace, a device used to heat metal and metal ore Basic oxygen furnace Bessemer converter Blastfurnace Bloomery Electric arc furnace Induction...
iron, is usually consolidated and further forged into wrought iron. Blastfurnaces, which produce pig iron, have largely superseded bloomeries. A bloomery...
operating. G & C Hoskins became the owners of the blastfurnace, a colliery, coke ovens, steelmaking furnaces, rolling mills, an iron ore mine at Coombing...
became important with the introduction of blastfurnaces and finery forges in the late medieval period. Blastfurnaces needed to operate continuously for as...
of preserved historic blastfurnaces contains decommissioned blastfurnaces, of which substantial remains survive. The furnaces are preserved in a park...
coke into the top of the blastfurnace. Preheated air at 190 to 1,050 °C (370 to 1,920 °F) is blown into the bottom of the furnace. Zinc vapour and sulfides...
difficulties of conventional blastfurnaces. DRI plants need not be part of an integrated steel plant, as is characteristic of blastfurnaces. The initial capital...
Industrial Revolution, Darby developed a method of producing pig iron in a blastfurnace fuelled by coke rather than charcoal. This was a major step forward...
type of blastfurnace known as a cupola, but in modern applications, it is more often melted in electric induction furnaces or electric arc furnaces. After...