Foam used in the manufacture and repair of aircraft
Ballistic foam is a foam that sets hard. It is widely used in the manufacture and repair of aircraft to form a light but strong filler for aircraft wings. The foam is used to surround aircraft fuel tanks to reduce the chance of fires caused by the penetration of incendiary projectiles.[1]
Ballistic foam is a type of polyurethane foam placed in the dry bays of aircraft. Ballistic foam prevents fires, adds strength to the structure, slows down the speed of shrapnel during attacks, and offers cost-effective protection.
Ballistic foam is placed in the dry bays to provide a barrier between the spark and the fuel. As bullets or shrapnel penetrate the mold line skin surrounding the outermost portions of the dry bay, the ballistic foam deprives sparks of oxygen. Thus when the article punctures the fuel tank, a fire is not started. Not only does the foam displace oxygen, but all gases, including explosive vapors which could magnify the destructive effects of ballistic attack. Dry bays, voids, may also contain “onboard ignition sources” like hot surfaces and electrical sparks which benefit both from a lack of gases and the fire-retardant nature of the foam.[2]
Ballistic foam strengthens aircraft by protecting it from fire as well as fluid while adding very little weight. The protection from fluid involves resisting damage by “moisture, hydrocarbon fuels, hydraulic fluids, and most common solvents”. The density of the foam varies with the type being used; Type 2.5 is a white to light amber foam weighing 2.5 pounds per cubic foot, while Type 1.8 is a pale blue to green foam weighing 1.8 pounds per cubic foot.[3]
Chopped fiberglass strands embedded in the foam add to the structural integrity through physical support and shrapnel mitigation. The layer that strengthens the foam in turn strengthens the airframe. The layer of fiberglass also prevents shrapnel and bullets from rupturing the foam. The fiber glass then allows the damage caused by projectile penetration to heal more effectively.[4]
The passive protection afforded by ballistic foam is very simple and inexpensive compared to active protection. One method of active protection is done by filling large dry bays with inert gases which will not sustain a flame. This process is very expensive and complex. Active protection only offers a “one time” chance for ballistic protection while the ballistic foam is always available.[5]
^Ballistic Evaluation of Aircraft Explosion Suppression Materials
^"Physical Description of Ballistic Foam". Survival Systems Composites. Retrieved 16 July 2012.
^"Physical Description of Ballistic Foam". Survival Systems Composites. Retrieved 16 July 2012.
^"Physical Description of Ballistic Foam". Survival Systems Composites. Retrieved 16 July 2012.
^"Physical Description of Ballistic Foam". Survival Systems Composites. Retrieved 16 July 2012.
Ballisticfoam is a foam that sets hard. It is widely used in the manufacture and repair of aircraft to form a light but strong filler for aircraft wings...
pores can be sealed (closed-cell foam) or interconnected (open-cell foam). The defining characteristic of metal foams is a high porosity: typically only...
The foam's low ballistic coefficient caused it to lose speed immediately after separating from the ET, and the orbiter ran into the slower foam.: 60 ...
the core density on the quasi-static flexural and ballistic performance of fibre-composite skin/foam- core sandwich structures". Journal of Materials Science...
A bulletproof vest, also known as a ballistic vest or a bullet-resistant vest, is an item of body armour that helps absorb the impact and reduce or stop...
of foams, with flexible and rigid types being roughly equal in market size. In both cases, the foam is usually behind other materials: flexible foams are...
California DOC called out 60% ballistic gelatin and the current standard for NIJ and HOSDB calls out a multi-part foam and rubber backing material. Using...
highly impractical to use retrorockets for the entire reentry procedure. Ballistic warheads and expendable vehicles do not require slowing at reentry, and...
X-rays flood the void (the "radiation channel" often filled with polystyrene foam) between the primary and secondary assemblies placed within an enclosure...
buoyancy aids and survival suits; PFDs are most often constructed out of foam pieces, with the exception of some life jackets which are inflated with air...
Titanium foams exhibit high specific strength, high energy absorption, excellent corrosion resistance and biocompatibility. These materials are ideally...
usually worn by trained personnel attempting bomb disposal. In contrast to ballistic body armors, which usually focus on protecting the torso and head, a bomb...
such a dynamic stretch is lunges. Another form of dynamic stretching is ballistic stretching, which is an active stretch that involves bouncing or swinging...
helmets between 1988 and 1990 for ballistic, engineering, and user trials. While the Barrday helmet performed well ballistically, field trials identified significant...
nicknames. See list of United States Marine Corps acronyms and expressions. Ballistic vests The Improved Modular Tactical Vest (IMTV) is the newest and most...
found that adding a thin layer of enamel to steel greatly improved its ballistic properties. Its first operational use was not until the Vietnam war in...
seen in the declassified film, shows a small cone projecting from the ballistic case. This cone is the part of the paraboloid that was used to focus the...
season one footage reviewed the IRA's sling shot and Spetsnaz's ballistic knife. The ballistic knife was determined as having the advantage due to the weapon's...
bicycling armor such as a ballistic vest for protection in warfare Materials to protect boxed contents during shipping, such as Foam peanuts Bubble wrap A...
2021, after 11 years of development. The Trident II submarine-launched ballistic missile (SLBM) can be armed with up to eight W88 warheads (Mark 5 re-entry...
multiple-laminate spaced armour with the spaces filled with ceramic polystyrene foam as fitted to the Leopard 1A3, they put a clear emphasis on improving KE-penetrator...
The Pershing II Weapon System was a solid-fueled two-stage medium-range ballistic missile designed and built by Martin Marietta to replace the Pershing...
This issue is exacerbated when there is fog, smoke, dust, rain, snow, smog, foam, or purposely dispersed obscurant chemicals present. In essence, a laser...
Global Information