Automatic train protection information

Automatic train protection (ATP) is the generic term for train protection systems that continually check that the speed of a train is compatible with the...

Automatic train control (ATC) is a general class of train protection systems for railways that involves a speed control mechanism in response to external...

A train protection system is a railway technical installation to ensure safe operation in the event of human error. The earliest systems were train stops...

Automatic train stop or ATS is a system on a train that automatically stops a train if certain situations occur (unresponsive train operator, earthquake...

(GoA) of trains. These levels correspond with the automotive SAE J3016 classification: Many modern systems are linked with automatic train protection (ATP)...

Automatic Warning System (AWS) is a railway safety system invented and predominantly used in the United Kingdom. It provides a train driver with an audible...

properly assess competencies Automatic train protection (ATP) is an advanced form of train stop which can regulate the speed of trains in situations other than...

transponder placed between the rails of a railway as part of an automatic train protection (ATP) system. The French word balise is used to distinguish these...

Train automatic stopping/stop-position controller (定位置停止装置) (TASC) is the name of a train protection system/automated stopping aid currently used only...

system controls the movement of trains between the blocks using automatic signals. ABS operation is designed to allow trains operating in the same direction...

functional overlap with many other train protection systems such as trip stops, but the distinction is that a driver or automatic operating system makes continuous...

Positive train control (PTC) is a family of automatic train protection systems deployed in the United States. Most of the United States' national rail...

systems needed to be superseded. For example, where manual or automatic block was implemented, train orders would be used to authorize movements into occupied...

Railway signalling Train protection system Train speed optimization Armstrong, John (1957). "All About Signals" (Two-article series). Trains Magazine, June...

intermittent inductive automatic train stop (also referred to as IIATS or just automatic train stop or ATS) is a train protection system used in North American...

adjacent to train tracks Automatic train protection, system installed in trains to prevent collisions through driver error Automatic Train Protection (United...

crossings either have "passive" protection, in the form of various types of warning signs, or "active" protection, using automatic warning devices such as flashing...

of points of potential conflict, as well as the speed and frequency of trains and the movements they require to make. Before discussing the application...

to track circuits. Automatic train protection (ATP) is enabled on CTCS level 1. Drivers use cab signals as primary signals. Train circuits are responsible...

companies in a set of procedures called train order operation, which was later partly automated through use of Automatic Block Signals (ABS). The starting point...

The European Train Control System (ETCS) is a train protection system designed to replace the many incompatible systems used by European railways, and...

signalling system, a train stop, trip stop or tripcock (sometimes called a tripper) is a train protection device that automatically stops a train if it attempts...

These arrangements are termed automatic interlockings, and the approach of a train sets its own route automatically, provided no conflicting movements...

signaling, and locomotives, producing high-speed, suburban, regional and urban trains along with trams. The company and its name (originally spelled Alsthom)...