An altitudecompensatingnozzle is a class of rocket engine nozzles that are designed to operate efficiently across a wide range of altitudes. The basic...
aerodynamic efficiency across a wide range of altitudes. It belongs to the class of altitudecompensatingnozzle engines. Aerospike engines were proposed for...
allowing the water to form back into a stream. Plug nozzles belong to a class of altitudecompensatingnozzles, much like the aerospike, which, unlike traditional...
of the class of altitudecompensatingnozzles, a class that also includes the plug nozzle and aerospike. While the expanding nozzle is the least technically...
A propelling nozzle is a nozzle that converts the internal energy of a working gas into propulsive force; it is the nozzle, which forms a jet, that separates...
The expansion-deflection nozzle is a rocket nozzle which achieves altitude compensation through interaction of the exhaust gas with the atmosphere, much...
stepped nozzle (or dual-bell nozzle) is a de Laval rocket nozzle which has altitudecompensating properties. The characteristic of this kind of nozzle is that...
leading to the nozzle. The temperature entering the nozzle may be as low as sea level ambient for a fan nozzle in the cold air at cruise altitudes. It may be...
body to adjust for decreasing air pressure, forming a large altitudecompensatingnozzle. The module was fed from a set of four cross-linked turbopumps...
problems with the launch vehicle. Advanced altitude-compensating designs, such as the aerospike or plug nozzle, attempt to minimize performance losses by...
temperature gas entering the core nozzle (lower exhaust velocity) and fan-produced temperature and pressure entering the fan nozzle. The amount of energy transferred...
near-zero energy, having bled off most of its speed without gaining any compensatingaltitude in the process. Except in one-on-one engagements, this leaves the...
but can be varied by adjusting the unloader valve or using specialized nozzle tips. Machines that produce pressures from 750 to 30,000 psi (5 to 200 MPa)...
5 bar (3,285 psi). The engine nozzle is 287 cm (113 in) tall and has an interior diameter of 229 cm (90.3 in). The nozzle is cooled by 1,080 interior lines...
chambers feeding into a single expansion nozzle. This was later altered to a large single chamber and single nozzle. Test stands were constructed at Peenemunde...
may be used to compensate for altitude, full load, and/or a cold engine. The injectors are simple spring-loaded check valves with nozzles; once fuel system...
a single nozzle and the customer selects the desired octane grade by pushing a button. Some pumps require the customer to pick up the nozzle first, then...
Global Information