440C (UNS designation S44004) is a martensitic 400 series stainless steel,[1] and has the highest carbon content of the 400 stainless steel series. It can be heat treated to reach hardness of 58 to 60 HRC. It can be used to make rolling contact stainless bearings, e.g. ball bearings and roller bearings. It is also used to make knife blades.
440C has the highest strength, hardness, and wear resistance of all the commonplace 440-series stainless alloys, with high carbon content and moderate corrosion resistance.[2]
^Cramer, Stephen D.; Covino, Bernard S. (2005). ASM handbook, Volume 13B- Corrosion: Materials. Materials Park, OH: ASM International. p. 56. ISBN 978-1-62708-011-8. OCLC 712545628.
^"440C Stainless Steel Products and Specifications - Penn Stainless Products | Penn Stainless Products". www.pennstainless.com.
440C (UNS designation S44004) is a martensitic 400 series stainless steel, and has the highest carbon content of the 400 stainless steel series. It can...
of 440C. SOG knives uses AUS-8 extensively. AUS-10 (10A) is comparable to 440C with a carbon content close to 1.10%. It is slightly tougher than 440C. CPM...
the most stain-resistant. Type 440B—slightly more carbon than 440A. Type 440C—has the greatest amount of carbon of the type 440 variants. Strongest and...
the corrosion resistant AMS5930, 440C stainless steel, silicon nitride (ceramic) and titanium carbide-coated 440C. Typically, special attention is given...
Industries). Crucible 154CM is a modification of martensitic stainless steel type 440C to which molybdenum has been added. It was originally developed for tough...
marked 440C, but tests found that the steel was something entirely different from American 440C. This steel was closer to AUS-8 than American 440C, and...
iron, 12% up to 17% chromium, carbon from 0.10% (Type 410) up to 1.2% (Type 440C): Up to about 0.4%C they are used mostly for their mechanical properties...
conducted by NASA, SM-100 has been shown to have over twice the life of 440C stainless steel and over ten times the life of conventional titanium alloys...
the corrosion resistant AMS5930, 440C stainless steel, silicon nitride (ceramic) and titanium carbide-coated 440C. A skateboard wheel contains two bearings...
components, such as slate hooks, roofing, and chimney ducts Knife blades (type 440C) Power plates in solid oxide fuel cells operating at temperatures around...
since 1964. Before 1981, the specially heat treated stainless steel used was 440C, and from 1981 to 1992 the company used 425M steel. Since 1993, Buck has...