9 mm (0.354 in) (3' gauge) 13.5 mm (0.531 in) (Scotch) 14.2 mm (0.559 in) (standard) 15.75 mm (0.620 in) (Irish) 16.5 mm (0.65 in) (Indian) 21 mm (0.827 in) (Brunel)[1]
Prototype gauge
3 ft (914 mm) 1,372 mm (4 ft 6 in) (Scotch gauge) 1,435 mm (4 ft 8+1⁄2 in) (standard) 5 ft 3 in (1,600 mm) (Irish gauge) 1,676 mm (5 ft 6 in) (Indian broad gauge) 2,134 mm (7 ft) (Brunel gauge)
Website
http://www.3mmsociety.org.uk/
British TT gauge
Scale
3 mm to 1 ft (305 mm)
Scale ratio
1:101
Model gauge
12 mm (0.472 in) TT gauge
Prototype gauge
Standard gauge
3 mm scale, also known as 3 mm finescale, is a model railway scale of 3 mm : 1 ft (305 mm) used for British prototypes. Introduced as British TT gauge, it sits approximately halfway between British N gauge and OO gauge but is not as popular as either and there is no longer any mass manufacturer ready-to-run support. When TT gauge model railways were developed for British prototypes, in order to fit the small British prototypes, the scale was enlarged but without altering the 12mm gauge. The result, British TT gauge, is too narrow. This led to the development of 14.2 mm (0.559 in) gauge 3mm finescale. Thus two finescale standards were developed. By far the more common of these is 14.2 mm gauge track, which is accurate. Some modellers choose to use slightly narrower 13.5 mm track due to the necessary oversize motion of outside-cylindered steam locomotives.
British TT, also known as TT3, was pioneered by Triang Railways as ready-to-run models.
Other gauges are also used to model other prototypes (Irish broad gauge, Brunel gauge). For narrow gauges, N gauge 9 mm track represents 3 ft (914 mm) gauge; Z gauge 6.5 mm (0.256 in) track represents to 2 ft 2 in (660 mm) gauge.
The 3mm Society caters for all modellers of 3 mm scale.
^Nigel Brown. "Getting Started in 3mm: FAQ". The Three Millimetre Society. Retrieved 2013-07-11.
15 mmscale where the height of "standard" 180 cm (5 ft 11 in) soldier height is 15 mm (0.59 in). For British 3mm TT scale, see 3mmscale. TT scale was...
2 mmscale, often 2 mm finescale is a specification used for railway modelling, largely for modelling British railway prototypes.[citation needed] It uses...
16 mm to 1 foot or 1:19.05 is a popular scale of model railway in the UK which represents narrow gauge prototypes. The most common gauge for such railways...
4 mmscale is the most popular model railway scale used in the United Kingdom. The term refers to the use of 4 millimeters on the model equating to a distance...
HO or H0 is a rail transport modelling scale using a 1:87 scale (3.5 mm to 1 foot). It is the most popular scale of model railway in the world. The rails...
illustrate: 3.5 mmscale (HO): 3.5 mmscale measurement = 1 foot (304.8 mm) prototype. The ratio is therefore 1:87.08571, usually reported as 1:87. 1 in scale: 1...
7 mmscale, also known as British 0 scale is a model railway scale of 1:43.5 (or 7 mm to 1 ft; hence its name). The scale is thus different from American...
For instance, a Z scale wheel flange as defined in the NEM standard should be about 9% of the scale nominal standard gauge (6.5 mm / 0.256 in), whereas...
G scale or G gauge, also called large scale (45 mm or 1+3⁄4 inches), is a track gauge for model railways which is often used for outdoor garden railways...
Effectively the scale is 1:159, 9 mm to 1,435 mm (4 ft 8+1⁄2 in), which is the width of standard gauge railway. However the scale may vary to simulate wide or...
Wikiversity has learning resources about Vernier scale Use of vernier scale in mm and cm – simulator Use of vernier scale in inch – simulator of measurement and...
several 4 mm-scale standards (4 mm to 1 ft (304.8 mm), or 1:76.2), and the only one to be marketed by major manufacturers. The OO track gauge of 16.5 mm (0.65 in)...
8 scale, 32.96 mm (1.298 in) at 7 mm:1 ft scale, and 33 mm (1.3 in) at 1:43.5 scale. Model makers choose their scale based on many considerations including...
example, HO scale uses 16.5 mm as the standard gauge of 4 ft 8+1⁄2 in (1,435 mm), 12 mm to represent 1,000 mm (3 ft 3+3⁄8 in) gauge (HOm), and 3 ft 6 in (1...
railway scale and gauge combination of 4 mmscale and 9 mm (0.354 in) gauge tracks, which models a prototype track gauge of 2 ft 3 in (686 mm). It is...
HR=N-hd} , where d is the depth in mm (from the zero load point), and N and h are scale factors that depend on the scale of the test being used (see following...
This is a list of scale model sizes, listing a variety of size ratios for scale models. Super Series - 1:1400 Scale, Modern Brands website (accessed 2017-06-21)...
popular scale. F scale – using 1:20.3 ratio with 45 mm (1.772 in) gauge track. This scale uses the same gauge as, and is derived from the popular G scale. It...
S scale (or S gauge) is a model railroad scale modeled at 1:64 scale, S scale track gauge (space between the rails) is 22.48 mm (0.885 in). S gauge trains...
Z scale is one of the smallest commercially available model railway scales (1:220), with a track gauge of 6.5 mm / 0.256 in. Introduced by Märklin in 1972...
The Kardashev scale (Russian: Шкала́ Кардашёва, romanized: Shkalá Kardashova) is a method of measuring a civilization's level of technological advancement...
pentatonic scale is a musical scale with five notes per octave, in contrast to heptatonic scales, which have seven notes per octave (such as the major scale and...
An octatonic scale is any eight-note musical scale. However, the term most often refers to the ancohemitonic symmetric scale composed of alternating whole...
The Brinell scale /brəˈnɛl/ characterizes the indentation hardness of materials through the scale of penetration of an indenter, loaded on a material...