This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "ZX Interface 1" – news · newspapers · books · scholar · JSTOR(February 2019) (Learn how and when to remove this message)
The ZX Interface 1 with the ZX Microdrive connected
The ZX Interface 1, launched in 1983, was a peripheral from Sinclair Research for its ZX Spectrum home computer. Originally intended as a local area network interface for use in school classrooms, it was revised before launch to also act as the controller for up to eight ZX Microdrive high-speed tape-loop cartridge drives. It also included a DE-9 RS-232 interface capable of operating at up to 19.2 kbit/s. At hardware level it was fundamentally a voltage adaptor, the serial protocol being implemented in software by bit-banging. This led to problems when receiving data, but not when transmitting.
A wedge-shaped device fitting underneath the ZX Spectrum, for correct fitment 2 screws needed to be removed from the underside of the Spectrum, the existing screwholes being used by longer screws running through the ZX Interface 1 to stop it from inadvertently becoming detached, the ZX Interface 1 contained 8 kB of ROM comprising the control software for the Microdrives, an RS-232 port and network interface. This extended the error handler in the Sinclair BASIC to allow extra keywords to be used. As this became an official standard, other developers quickly used this mechanism to create language extensions to Sinclair BASIC.
Two further revisions of the device's firmware were made following launch.[1] These aimed to improve ZX Microdrive cartridge formatting and access time, printing functions via the RS-232 interface, and other bugs in the firmware held in the device's internal 8K ROM. Machine code software which used the officially documented entry points ('hook codes') would experience few incompatibility issues; however, programs using non-standard entry points risked incompatibility due to the presence of revised entry points.
The same protocol, renamed QLAN, was later used on the Sinclair QL. This was intended to be interoperable with ZX Net, but due to timing differences interoperability was found to be problematic.
The ZX Interface 1 was incompatible with some later ZX Spectrum models such as the +2A and +3, due to differences in ROM and in the expansion connector. It was therefore impossible to connect and use the Microdrive units with these later models. It did, however work with the original +2, although the much larger case made the interface an awkward fit.
^Interface 1, Issue 10, December 1984, Your Spectrum 10
The ZXInterface1, launched in 1983, was a peripheral from Sinclair Research for its ZX Spectrum home computer. Originally intended as a local area network...
The ZXInterface 2 is a peripheral from Sinclair Research for its ZX Spectrum home computer released in September 1983. It has two joystick ports and a...
innovative but also rather limited. Connecting a ZX Microdrive to a ZX Spectrum required the ZXInterface1 unit, costing £49.95, although this could be bought...
of the small molecule sensors ZX-1, a bicycle by Vitus ZXInterface1, a peripheral for the ZX Spectrum This disambiguation page lists articles associated...
The following is a list of clones of Sinclair Research's ZX Spectrum home computer. This list includes both official clones (from Timex Corporation) and...
The ZXInterface1 add-on module, launched in 1983, includes 8 kB of ROM, an RS-232 serial port, a proprietary local area network (LAN) interface known...
ZX Interface1 and ZX Microdrive, was very cheap and technologically innovative, it was also rather limited. Many companies developed interfaces to connect...
ZX Spectrum Next is an 8-bit home computer, initially released in 2017, which is compatible with software and hardware for the 1982 ZX Spectrum. It also...
Sinclair's own ZXInterface1, the DISCiPLE was a wedge-shaped unit fitting underneath the Spectrum. It was designed as a super-interface, providing all...
including memory expansion modules, the ZX Printer, and the ZXInterface1 and ZXInterface 2 add-ons for the ZX Spectrum. A number of QL peripherals were...
the ZX Spectrum home computer. Each tape is a continuous loop, unlike cassette tape. It was intended to compete with Sinclair's ZXInterface1 and ZX Microdrive...
The missing functionality was later added by additional code in the ZXInterface1. After Nine Tiles and Sinclair went their own ways, several new versions...
video output, Kempston joystick interface, and additional video modes, while being highly compatible with the Sinclair ZX Spectrum computer (although ROM...
The Kempston Interface, a peripheral which allowed a joystick using the de facto Atari joystick port standard to be connected to the ZX Spectrum, was...
as 1000BASE-X, where -X refers to either -CX, -SX, -LX, or (non-standard) -ZX. (For the history behind the "X" see Fast Ethernet § Nomenclature.) IEEE 802...
was hugely successful; more than 1.5 million units were sold. In the United States it was initially sold as the ZX-81 under licence by Timex. Timex later...
The TK 95 microcomputer was a 1986 ZX Spectrum clone by Microdigital Eletrônica, a company located at São Paulo, Brazil. It was an evolution of the TK90X...
1K ZX Chess is a 1982 chess program for the unexpanded Sinclair ZX81. 1K ZX Chess's code takes up only 672 bytes in memory, but implements chess rules...
with a ZX Spectrum emulator cartridge and a black TC 2068 version sold with TimeWord word processing cartridge plus the Timex RS232 Interface to use TimeWord...
Romantic Robot were the Multiprint printer interface and the Videoface video capture peripheral, both for the ZX Spectrum. Software published by the company...
accessories and clones, such as the ZX-UNO, the ZX Spectrum Next and the MB03+ Ultimate interface. The eLeMeNt ZX computer is specially designed to support...
printer that used the same interface, and therefore could be driven by a ZX81 or Spectrum without additional software. Unlike the ZX Printer, it had a separate...
Timex was already the main contractor for manufacture of Sinclair's ZX81 and ZX Spectrum computers at its Scottish plant in Dundee. Due to large demand another...