This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Windshaft" – news · newspapers · books · scholar · JSTOR(July 2022) (Learn how and when to remove this message)
A windshaft lying near a millHook Windmill, North Main Street at Pantigo Road, East Hampton, Suffolk County, NY HAER NY,52-HAMTE,2- (sheet 6 of 6)Windshaft connected to other parts. 1=sails; 2=windshaft; 3=brake wheel, 4=crown wheel with cogs; 5=vertical or main shaft.brake wheelcrown wheel with cogs and windshaft
The Windshaft is a part in a windmill that carries the sails and also the brake wheel (Smock and Tower mills, and in some Post mills) or the head wheel and tail wheel in a Post Mill. Windshafts can be wholly made of wood, or wood with a cast iron poll end (upon where the sails are mounted) or entirely of cast iron.[1]
^CLARK, H. O; WAILES, REX (1949-01-01). "Notes on the Berton Sail and the Caviers or Hollow Post Mills of Anjou". Transactions of the Newcomen Society. 27 (1): 211–216. doi:10.1179/tns.1949.020. ISSN 0372-0187.
The Windshaft is a part in a windmill that carries the sails and also the brake wheel (Smock and Tower mills, and in some Post mills) or the head wheel...
to a mechanical device. The sails are carried on the horizontal windshaft. Windshafts can be wholly made of wood, wood with a cast iron pole end (where...
Minister) Charles Haughey. Nowadays again wheat is ground. The wooden windshaft has a one-ton stock housing cast. The mill has wings of 18.29 meters (60...
was modernised. The common sails were replaced by patents; the wooden windshaft replaced by a cast-iron one; the layout of the millstones changed from...
lightning and on 5 January 1900 the windshaft snapped at the neck and the sails crashed to the ground. A windshaft from a post mill near Maldon was fitted...
in a Smock or Tower mill, and in some post mills. It is carried on the Windshaft and drives the Wallower on the Upright Shaft Buck The Buck is an East-Anglian...
overall height of about 56 feet (17.07 m). Terling Windmill has a cast-iron windshaft and four double Patent sails. The last working pair of sails came from...
are generally referred to by the plane of rotation of the main axle (windshaft). Thus a horizontal mill may also be described as a "vertical-axis windmill"...
was working until struck by lightning in 1905, damaging the sails and windshaft. The derelict mill was restored in 1934 by Neve's, the Heathfield millwrights...
Five storeys No. of sails Four sails Type of sails Double Patent sails Windshaft Cast iron Winding Fantail Fantail blades Eight blades No. of pairs of...
used for pumping water in areas where only a small lift is required. The windshaft sits on a tripod which allows it to pivot. The Archimedean screw lifts...
roundhouse. It has two common sails and two spring sails carried on a wooden windshaft. Two pairs of millstones are located in the breast. The mill is winded...
was by an eight-bladed fantail. South Ockendon Windmill had a cast-iron windshaft carrying two double Patent sails and two single Patent sails with a span...
are carried on a cast iron windshaft, which was cast by J M de Muinck Keizer, Martenshoek. Groningen in 1898. The windshaft carries the brake wheel which...
originally built, the mill would have had a wooden windshaft and four common sails. The windshaft is of cast iron, probably replacing a former wooden...
Isle of Sicilly constructed in 1820. Windshaft – A particularly important part of the sail frame, the windshaft is the cylindrical piece that translates...
built, the mill would have had a wooden windshaft and four common sails. The sails are spring sails. The windshaft is of cast iron, replacing the former...
construction company Lont and British millwright Vincent Pargeter. The windshaft was cast and machined at Sanders IJzergieterij en Machinefabriek B.V....
worked by wind until it was tailwinded in January 1935, breaking the windshaft and rendering the mill sail-less. The scoopwheel was subsequently worked...