Wheel and axle information

The wheel and axle is a simple machine consisting of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred...

of the key components of the wheel and axle which is one of the six simple machines. Wheels, in conjunction with axles, allow heavy objects to be moved...

An axle or axletree is a central shaft for a rotating wheel or gear. On wheeled vehicles, the axle may be fixed to the wheels, rotating with them, or...

also been used as front axles in four-wheel-drive vehicles. In most automobiles, beam axles have been replaced with front (IFS) and rear independent suspensions...

onto an axle. All wheel profiles are regularly checked to ensure proper interaction between the wheel and the rail. Incorrectly profiled wheels and worn...

reduced torque (by using higher shaft speed). This reduces load on the axle crown wheel and differential. The portal gear configuration is also sometimes called...

Rail Wheel Factory, Yelahanka (RWF) (also known as Wheel and Axle Plant) is a manufacturing unit of Indian Railways, producing wheels, axles and wheel sets...

undershot wheel is a vertically mounted water wheel with a horizontal axle that is rotated by the water from a low weir striking the wheel in the bottom...

leading wheel or leading axle or pilot wheel of a steam locomotive is an unpowered wheel or axle located in front of the driving wheels. The axle or axles of...

there are two trucks (or wheel assemblies) under the unit. Each truck has one powered axle and one idler axle, with the idler axles to the outside. Examples...

simple machines that were defined by Renaissance scientists: Lever Wheel and axle Pulley Inclined plane Wedge Screw A simple machine uses a single applied...

simple machines were invented in the ancient Near East. The wheel, along with the wheel and axle mechanism, was invented in Mesopotamia (modern Iraq) during...

automobiles (and other wheeled vehicles which have two wheels on an axle), the axle track is the distance between the hub flanges on an axle. Wheel track, track...

than two axles (e.g. some trucks), the wheelbase is the distance between the steering (front) axle and the centerpoint of the driving axle group. In...

A swing axle is a simple type of independent (rear wheel) suspension designed and patented by Edmund Rumpler in 1903. This was a revolutionary invention...

axle arrangements, sometimes known as the German classification or German system, describes the wheel arrangement of locomotives, multiple units and trams...

curved tube axle that clears the rear subframe to provide 50mm (2 inches) of wheel travel. Benefits include simplicity, durability, compactness and a relatively...

equipment. The wheel has an overall diameter of 35 m (115 ft) and consists of two opposing arms extending 15 m (49 ft) beyond the central axle and taking the...

a wheel on an axle or shaft enabling a taut cable or belt passing over the wheel to move and change direction, or transfer power between itself and a...

of mass a wheel will carry. This number will vary depending on the number of lugs, the PCD, the material used and the type of axle the wheel is used on...

consists of a wheel sensor (one for each end of the section) and an evaluation unit for counting the axles of the train both into and out of the section...

locomotive, a trailing wheel or trailing axle is generally an unpowered wheel or axle (wheelset) located behind the driving wheels. The axle of the trailing...