The Unified Thread Standard (UTS) defines a standard thread form and series—along with allowances, tolerances, and designations—for screw threads commonly used in the United States and Canada. It is the main standard for bolts, nuts, and a wide variety of other threaded fasteners used in these countries. It has the same 60° profile as the ISO metric screw thread, but the characteristic dimensions of each UTS thread (outer diameter and pitch) were chosen as an inch fraction rather than a millimeter value. The UTS is currently controlled by ASME/ANSI in the United States.
and 27 Related for: Unified Thread Standard information
The UnifiedThreadStandard (UTS) defines a standardthread form and series—along with allowances, tolerances, and designations—for screw threads commonly...
compatibility: UnifiedThreadStandard (UTS), is the dominant threadstandard used in the United States and Canada. It is defined in ANSI/ASME B1.1 Unified Inch...
States Standardthread (USS thread), also known as Sellers Standardthread, Franklin Institute thread and American Standardthread, is a standard for inch...
Association), and the UnifiedThreadStandard. The basic principles of the ISO metric screw thread are defined in international standard ISO 68-1 and preferred...
British Standard Whitworth (BSW) is an imperial-unit-based screw threadstandard, devised and specified by Joseph Whitworth in 1841 and later adopted as...
metric screw thread is the most commonly used type of general-purpose screw thread worldwide. They were one of the first international standards agreed when...
according to one of the many standards of thread systems. Standards Development Organizations such as the American National Standards Institute, American Society...
generally used three thread sizes. The UnifiedThreadStandard (UTS) originates from the United States, while the ISO metric screw thread is standardized worldwide...
in the manufacture and inspection of parts and assemblies. Technical standards exist to provide glossaries of abbreviations, acronyms, and symbols that...
for ISO and DIN standards. (d) Whitworth or British Standard - Very similar British standard replaced by the UnifiedThreadStandard. In machine linkages...
adoption of Unified, and later Metric, standards. For highly stressed conditions, especially in motorcycles, a finer thread, British Standard Cycle (BSC)...
publication of ANSI's first object-oriented programming standard. A popular UnifiedThreadStandard for nuts and bolts is ANSI/ASME B1.1 which was defined...
too small in diameter (British Standards A211-8C vs A211-8D, which are #8–32 vs #10–32 by the UnifiedThreadStandard) and the remaining six were A211-7D...
Standard Pipe (BSP) British Standard Whitworth National pipe thread (NPT) UnifiedThreadStandard (UTS, including UNC, UNF and UNEF) Terminology related to...
South Korea during and after the Korean War UNC, a UnifiedThreadStandard defining a screw thread Uniform Naming Convention, for Microsoft Windows systems...
mean: Unified National Special, part of the UnifiedThreadStandard Unnilseptium (Uns), temporary name of chemical element 107, bohrium (Bh) Unified numbering...
function), one of Jacobi's elliptic functions National coarse, a UnifiedThreadStandard for screws, nuts, and bolts National Radio Company, American manufacturer...
of thread can vary depending on the rack. Mounting rails can be No. 10-32 tapped (UnifiedThreadStandard), No. 12-24 tapped, metric M6 threaded or universal...
applications until the development of the UnifiedThreadStandard in the late 1940s. "SECDEF Memo Specifications & Standards – A New Way of Doing Business, DTD...
Countersunk-head screws that follow the UnifiedThreadStandard very often have an 82° angle, and screws that follow the ISO standard very often have a 90° angle...
per document ANSI/ASME B18.2.6, which uses "coarse" threads as defined by UnifiedThreadStandard. ASTM 325 bolts can be considered equivalent to Grade...
thread is simply OD − 0.6p and the minor diameter is OD − 1.2p. The thread angle is different from that used by Whitworth (55°), US Unifiedthreads (60°)...
about 3.6 volts. Manufacturers may have their own part numbers for IEC standard size cells. The capacity listed is for a constant resistance discharge...
references to inch fractional sizes and to the screw thread sizes of the UnifiedThreadStandard (UTS). SAE is also well known in the United States for...