Triumph sprung hub information

The Triumph sprung hub is a motorcycle suspension unit contained within a rear wheel hub. It was designed by Triumph engineer Edward Turner to give Triumph's...

recovery of Triumph at Meriden was largely due to the Speed Twin, which was developed in 1946 with a telescopic fork and optional sprung hub rear suspension...

of Triumph's post-war production to be shipped to the United States. Post war, the Speed Twin and Triumph Tiger 100 were available with a sprung rear...

The Triumph Tiger Cub was a 200 cc (12 cu in) single-cylinder British motorcycle made by Triumph Motorcycles at their Meriden factory. Based on the Triumph...

The Triumph Bonneville T140 is a standard motorcycle with a 750 cc (46 cu in) capacity engine that was designed and built by Triumph Engineering at Meriden...

transmission to allow the driveshaft to pivot along the same axis as the sprung rear frame. Moto Guzzi patented its Compact Reactive Drive Shaft system...

to the sprung center of gravity height is the roll moment arm length. The total sprung weight transfer is equal to the G-force times the sprung weight...

introduced, it was relatively rare for British cars to have independently sprung rear wheels, most production cars of the time using live rear axles. Independent...

the telescopic fork. Other fork designs are girder forks, suspended on sprung parallel links (not common since the 1940s) and bottom leading link designs...

to hardy spicer joints, with short driveshafts to the independently sprung hubs. This was an advanced feature at a time when most other cars had cart-spring...

Dodge Viper sports car. The Tomahawk's two front and two rear wheels are sprung independently, which would allow it to lean into corners and countersteer...

Retrieved 2024-05-24. "Unofficial list of Dragon Ball episodes". Dragonball Hub. Archived from the original on 2016-07-28. Retrieved 2016-07-04. Specific...

that facilitated commerce and tied the nation together with Paris as its hub. This stimulated economic growth and brought prosperity to most regions of...

shafts to the rear hubs. These "rubber doughnut" couplings were widely used at the time for road vehicles (e.g. Hillman Imp, Triumph GT6) and racing (e...

Sturmey-Archer hubs, and remained in production until 1976, when the factory burned down. Models produced there latterly were the Chopper and Triumph 20. The...

light-manufacturing concerns in packaging organic and high-end food have sprung up in the old plant. First established as a shipbuilding facility in 1801...

overheating. Key advantages of a two-piece disc are a saving in critical un-sprung weight and the dissipation of heat from the disc surface through the alloy...

rear-wheel drive, and rear suspension with panhard rod, torque tube, and coil-sprung live axle, were carried over unaltered. Inside, the two cars differed only...

Land Rover Series IIA pickup-type Land Rover Series IIA station wagon coil-sprung hybrid 1963 Series IIA ambulance, United Nations 1965 Series IIA ambulance...

used by Zhukov to achieve victory at Khalkhin Gol in 1939, where he had sprung a double envelopment and destroyed the 23rd Division of the Japanese army...

stage. 1989 was the first year that impromptu, unofficial sound systems sprung up around the festival site – a portent of things to come. These sound systems...

made in 1959. This Aceca-Bristol had a wider body and was built on a coil-sprung chassis similar to the AC Greyhound. Also, there exists a prototype with...

especially streetcars enabled urban expansion as new residential neighborhoods sprung up along transit lines and workers rode to and from work downtown. Since...