Thermomechanical processing is a metallurgical process that combines mechanical or plastic deformation process like compression or forging, rolling, etc. with thermal processes like heat-treatment, water quenching, heating and cooling at various rates into a single process.[1]
^Degarmo, E. Paul; Black, J T.; Kohser, Ronald A. (2003). Materials and Processes in Manufacturing (9th ed.). Wiley. p. 388. ISBN 0-471-65653-4.
and 21 Related for: Thermomechanical processing information
Thermomechanicalprocessing is a metallurgical process that combines mechanical or plastic deformation process like compression or forging, rolling, etc...
levels at the steelmaking stage. Weldable grades were developed. Thermomechanicalprocessing solved the problems of "roping" and "ridging" that led to inhomogenous...
enhanced grain boundary strengthening. ThermomechanicalProcessing Utilizing specific thermomechanicalprocessing routes, such as rolling, forging, or extrusion...
Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they...
The thermomechanical cuttings cleaner (TCC) is a patented technology mainly used by service providers in the oil and gas industry to separate and recover...
ductile steels are usually produced using the TEMPCORE process, a method of thermomechanicalprocessing. The manufacture of reinforcing steel by re-rolling...
effect to reduce its impact. Heat Treatment: Heat treatment and thermomechanicalprocessing are widely used to mitigate the Bauschinger effect by relieving...
volume, yielding an array of materials with interesting thermomechanical properties. In the processing of glass-ceramics, molten glass is cooled down gradually...
precipitation hardening). Grain boundary engineering through thermomechanicalprocessing has been shown to mitigate these effects by changing the fracture...
are used. Bleached chemi-thermomechanical pulp (BCTMP) also includes a bleaching step. Pulp Sulfite process and Kraft process Bleaching of wood pulp Pulp...
chemical pulping process, followed immediately by a mechanical treatment to separate the fibers. These hybrid methods include thermomechanical pulping (TMP)...
solder joints). Repeated temperature cycling eventually leads to thermomechanical fatigue. The deformation characteristics of various solder alloys can...
Ausforming, also known as low and high temperature thermomechanical treatments, is a method used to increase the hardness and toughness of an alloy by...
2012). "Microstructure evolution and texture development in thermomechanicallyprocessed Mg–Li–Al based alloys". Materials Science and Engineering: A...
few milliseconds. Recent advances have shown that processing of nitinol can expand thermomechanical capabilities, allowing for multiple shape memories...
frit-bonded sensors". The Tenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems, 2006. ITHERM '06. pp. 1343–1348....
key difference in evaluating chemical exergy versus thermomechanical exergy is that thermomechanical exergy does not take into account the difference in...
referred to as microvia pull out). These failures result from the thermomechanical stresses caused by coefficient of thermal expansion (CTE) mismatch...
electronics applications" (PDF). 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, 2008: ITHERM 2008: 28–31 May 2008...
composition. Aluminides lack ductility below 750 °C, and exhibit limited thermomechanical fatigue strength. Pt-aluminides are similar to the aluminide bond coats...